How do I access a USB server on a "different network segment"?

I have tried posting this question in the Server community but with no response, however I believe the solution will be achived through Terminal and I believe there will be those versed in the use of Terminal here, so here goes.
I have a USB Server with four ports attached to my ethernet LAN. If I enter the IP address into Safari it shows me the Server details and the details of any item attached to any of the ports. However I cannot access anything on the server. If I put the IP address into Connect to Server I get an error message. Apparently the Server is on a "different network segment". How can I overcome this?
Attached pages from Safari.

MyBook USB=junk.
If you search the forums you will find many users with problems with this particular brand.
Does this drive have an external AC power supply brick? If not, Apple recommends the use of a powered USB hub.

Similar Messages

How to control accessing Oracle Application Server URLs

Hey all;
I wish you are all doing okay.
I am facing a problem with OAS Oracle Application Server; Since we switched form using forms 6i to OAS 10g running on the web browser of course using a URL for each application
The question is if I give a user a single URL for the application he is using and he just change his application name for example hr by payroll he will be able to open the payroll and run reports or even editing values!
How to restrict accessing the apps to only the authorized users on Oracle Application Server 10g?!
Thank you all in advance

Hi Mohamed,
Please follow the below note:Preventing Access to URI's Via IP Address Using Mod_Rewrite (Doc ID 1306292.1)
Regards,
Prakash.

How can i access mac mini server from iPad?

how can i access my files in mac mini server using an ipad2? what apps do i need?

Hi,
I found an App called iTeleport. Have a look.

HT2421 How do I access the USB drive once it is connected to the Airport Extreme? I can't find it? Thanks.

I have set upmthe Airport Extreme and all is well, except I do not understand how to access the USB Drive. I am using a PC and two IOS Devices

An App like Filebrowser will allow your iOS devices to browse files on the hard drive.
Stratospherix - Products - FileBrowser - Overview

How can I connect to SQL server database thru local network by using JSP?

I'm currently doing a project by using JSP..And I need to display record from the SQL Server database in our school's local network. May I know how can I do that? How can I write the code so that I can able to access the SQL Server databsase Throught school's network by using JSP? Please tell me step by step how can I do that. I'm using Tomcat 4.1 as Web Server. And I had J2SE and J2EE installed in my computer.

first you have to establish a ODBC DSN on your computer,
that connects to the database...you can do that from your control pannel.
i assume that the TOMCAT server is residing on your computer....(if the webserver is in other computer then you would have to create a System DSN on the data sources ODBC option in the settings>control pannel of that machine)
then you can use that DSN name to connect to the data base from the class file....for further assistance on how to create the class that access the tutorials in sun site.
regards
G

HT2954 How can I access my imac mail from a different computer other than Apple?

How can i access my imac email from a differnt computer other than
apple?

If you are using IMAP mail connection (IMAP keeps the mail on the server), then you just configure the other computer's mail client to access the same account.
If you are using a POP mail connection, then the mail is generally downloaded to your Mac and deleted from the server. That is a much more difficult problem to solve. NOTE: Google's gmail does have a POP option that does NOT delete the mail on the server, so it is accessible via the gmail web page.
A lot depends on what you are using for your mail service and whether you are using IMAP or POP protocols.

Console Access to CPO Server in a different time zone: Verifying Security

Hello,
I noticed this on multiple instances, when CPO console in one timezone (example: CST) tries to access a CPO Server in a totally different timezone, the console is not able to login to the CPO Server and I see this error message:
"An error occurred when verifying security for the message"
Is there any known issue with console accessing the CPO server and some handshake happening?
From the logs:
@@Logging from process Tidal.Automation.Console.Loader.exe(id=13248)
||8|2013/03/06 19:20:00.365|13736||||Could not get server ID for assembly store connection:
||9|2013/03/06 19:20:00.366|13736||||EXCEPTION (System.ServiceModel.Security.MessageSecurityException): An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail.
Stack Trace:
Server stack trace:
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
   at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId()
   at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles()
||10|2013/03/06 19:20:00.366|13736||||   INNER EXCEPTION (System.ServiceModel.FaultException): An error occurred when verifying security for the message.
Stack Trace:
||11|2013/03/06 19:20:37.696|13736||||Could not get server ID for assembly store connection:
||12|2013/03/06 19:20:37.696|13736||||EXCEPTION (System.ServiceModel.Security.MessageSecurityException): An unsecured or incorrectly secured fault was received from the other party. See the inner FaultException for the fault code and detail.
Stack Trace:
Server stack trace:
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.ProcessReply(Message reply, SecurityProtocolCorrelationState correlationState, TimeSpan timeout)
   at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
   at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
   at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Tidal.Automation.Common.AssemblyManager.IAssemblyManager.GetServerId()
   at Tidal.Automation.WinForms.Loader.AssemblyStore.GetRequiredFiles()
||13|2013/03/06 19:20:37.696|13736||||   INNER EXCEPTION (System.ServiceModel.FaultException): An error occurred when verifying security for the message.
Stack Trace:

More important than whether their timezones differ is whether their *times* differ.
12:00 in EST = 9:00 in PST as far as everyone (including Windows) is concerned.
If both are showing 12:00 then time sync is the problem, and this would cause authentication handshake issues. NT authentication only allows something like 10 minutes of clock skew. My example here has 180 minutes of clock skew.

HT1203 How can I access my itunes account from a different computer as I need to cancel a subscription and I am on holiday at the moment

Hello
I need to access my itunes account from a different computer as I need to cancel a subscription and I am on holiday at the moment.
Am I already now logged in to Apple ??
Thanks

If the Computor you are on has iTunes library go to tunes as if u were going to buy a song or film and you can log into your account. At the bottom of the iTunes home page you should see the user that is logged on usually a email address. Click on it to log them out and enter your own apple I'd and password. You can then update whatever you want and log back out after

How to transfer the coherence cache t to a different network/environment?

Hi,
I have a requirement where in i need to import/export cache from one network into a different network/environment all together keeping the cache data intact. How do i achieve this from Coherence side? I am using distributed cache scheme.
Regards,
Radhika

You could serialize to a file the content of the cache then read it back at the other end. The cache dump usually does not take much time even for GB sized caches. The import usually takes more time.
Here is sample code to serialize the content of a cache. Ideally you should use POF to have already compacted data.
Export:
     public void exportCache(String cacheName, File file) throws Exception {
          WrapperBufferOutput wrappedBufferOutput = null;
          try {
               NamedCache cache = CacheFactory.getCache(cacheName);
               FileOutputStream fileOutputStream = new FileOutputStream(file);
               BufferedOutputStream bufferedOutputStream = new BufferedOutputStream(fileOutputStream, 1024 * 1024);
               DataOutputStream dataOutputStream = new DataOutputStream(bufferedOutputStream);
               wrappedBufferOutput = new WrapperBufferOutput(dataOutputStream);
               ConfigurablePofContext pofContext = (ConfigurablePofContext) cache.getCacheService().getSerializer();
                    for (Object o : cache.entrySet()) {
                         pofContext.serialize(wrappedBufferOutput, ((Map.Entry) o).getValue());
          } finally {
               if (wrappedBufferOutput != null) {
                    wrappedBufferOutput.close();
         timer.print();
Here is sample code to deserialize the content of a cache store on a file:
Import:
public void importCache(String cacheName, File file) throws Exception {
          WrapperBufferInput wrappedBufferInput = null;
          try {
               NamedCache cache = CacheFactory.getCache(cacheName);
               FileInputStream fileInputStream = new FileInputStream(file);
               BufferedInputStream bufferedInputStream = new BufferedInputStream(fileInputStream, 1024 * 1024);
               DataInputStream dataInputStream = new DataInputStream(bufferedInputStream);
               wrappedBufferInput = new WrapperBufferInput(dataInputStream);
               ConfigurablePofContext pofContext = (ConfigurablePofContext) cache.getCacheService().getSerializer();
               while (wrappedBufferInput.available() > 0) {
                    ImportableObject o = (ImportableObject) pofContext.deserialize(wrappedBufferInput);
                    cache.put(o.getObjectKey(), o);
          } finally {
               if (wrappedBufferInput != null) {
                    wrappedBufferInput.close();
Here we assume that cache entries implement ImportableObject interface which has the getObjectKey() method. This make it easy to figure out the key of the entry without knowing its real type.

How do I access the USB harddrive on E3000? Am I missing something?

I have my router setup fine to the internet, as well as the media server. I can't figure out how to access the hard drive from my laptop, however. The manual says put 192.168.1.1 in the address field of windows explorer, but it just gives me the "Setup" page for the router.
Am I missing something simple? I'm using Windows XP.
Solved!
Go to Solution.

Click on Start -Go to Start>>Run/Start search and type "\\192.168.1.1" (Without quotes) and hit enter, and it should prompt you for the Username and Password, in the Username and Password use "admin" all in lower case and click Ok...Now you should be able to see your USB Drive... You need to right click on it and select "Map Network Drive" and check the box Enable and below click on Finish... This will Map the USB Drive on your computer... Once done you will be able to Send and Receive the data from your Computer to the USB Drive...

How do I access a USB hard drive plugged into my AirPort Extreme from a PC?

Hi
I have an AirPort Exteme, and my cousin and I are having no trouble accessing it from our MacBook Pro, however when it comes to my other cousin, she can't find it fron her PC (operating on windows 7). When the MacBook Pro's open finder it is just sitting under 'shared'. How do I get my cousin to access the Hard Drive from her PC? She is connected to the Wi-Fi network just fine
Thanks in advance!

Download the Airport utility for PC from Apple - I use this to connect - This should load the Airport Base Station Agent in the system tray which can be used to connect. It should appear as a Network Drive (Z:)
Regards,
Shawn

How to monitor access ports to server on LMS 4.0

Hi everybody!
I would like to monitor access ports to servers in cases:
- When port to server down, alert appears in Fault Monitor panel
- Monitor when bandwidth utilization of access ports exceeds 60%.
I configured Fault Threshold on DFM>System Defined Groups>Access port Settings and Poller settings on the same group but it did not work when I shut a port to server.
Please help me!
Thanks and Best Regards

By default Fault monitor manages Trunk Ports. You can check if the interface you worked on is managed :
Monitor > Fault Settings: Setup > Fault Device Details
You can check if the port/interface shows true as managed, which you tested.

Help. How to configure ASA5515 as 'one armed router' for access to DHCP server on a different VLAN

Hi,
My setup
     router > ASA5515(ver8.6) > 4 SGE2010p switches
I want to put the guest WiFi users on a separate network. I have layer 2 switches and want to configure the ASA5515 as a 'router on a stick' setup for the guest vlan to have access to the DHCP server on the native vlan.
I have
1. created a sub-interface for the inside interface and enabled intra-interface traffic.
2. A static route on the ASA point the guest network to the switch.
What else do I need to configure on the ASA for inter-vlan routing?
ASA related config:
interface GigabitEthernet0/1
nameif inside
security-level 100
ip address 10.15.xx.1 255.255.252.0 standby 10.15.xx.2
interface GigabitEthernet0/1.2
vlan 100
no nameif
no security-level
ip address 10.100.xx.1 255.255.255.0
C    10.15.xx.0 255.255.252.0 is directly connected, inside
S    10.100.xx.0 255.255.255.0 [1/0] via 10.100.xx.2, inside

Thanks for the quick response Reza.
Actually that command is already there. Didn't include it in my post.
So I am guessing my ASA config is correct.
I am having trouble setting up the trunk ports on the layer2 SGE2010P switch for trunk port.
I am used to command line layer3 switches (CLI is wasy) but not familiar with these switches GUI. I am going through the config guide right now.
Could you help me with that too?
Not to bother you with a completely different issue though.
Thanks again!

How to RDP access my Windows server 2012 system with Windows 7 system

In the VMWARE workstation, I have a " Windows server 2012" & " WIndows 7" OS deployed. I am not able to RDP the " Windows server 2012" from "Windows 7" system even though i have performed the below step.
1. Enabled the " Allow Remote Connections to this comptuter " in windows server 2012
2. Disabled the firewall in Windows server 2012.
Can someone advice me on the below.
1. How to RDP my windows server 2012 from my Windows 7 with " Firewall disabled" & "Firewall Enabled" conditions

Hi,
Just make sure that the firewall is disabled in all three profiles Domain/Private/Public.
Create a incoming UDP rule on firewall to allow port 3389 and give a try.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b1ec4602-7120-4660-a1ba-e05289a479cf/windows-2012-r2-firewall-blocking-remote-desktop?forum=winserverTS
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

How can i access my itunes library in a different computer?

I have my itunes library in my laptop at home and sometimes during my spare time in the office I want to access my library or download more songs to my library. How can I do that?

your personal library is not saved to the internet, but your itunes account is, so you can download songs on different computers through your accound
also, if you want all of your itunes library on both comps, then just copy them using some kind of connection.
And ipod works best

How do I access a USB server on a "different network segment"?

Similar Messages

Maybe you are looking for