How do I access CProjects in Sol Man

Hi all
I've been looking through the SAP Project management tools and have started familiarising myself with SOLAR01 / 02, RMMAIN, etc but have found through digging in Google that SAP has another set of project management tools called CProjects. (By all accounts you can do Gantt charts, resource scheduling and all that Jazz?)
I think it is installed in our Sol Man solution as I can give my user the Auths required for access to CProjects inc SAP_CPR_PROJECT_ADMINISTRATOR etc.
However I cannot yet find out how to access the CProject menu's etc (if they exist as such). Can you give me some help here as to what these menu items are and how do I confirm that CProjects is actually fully installed.
Also are there any other SAP PM Tools my system should contain?
Thanks

Hi Mapp,
The features of Solman and cProjects complement each other to provide a complete toolset for effective project management.Solman project can be extended to cProjects to manage project phases and tasks.
To access cProjects via Solman, navigate to Environment -> Project IMG -> Select 'Logical Component' cProjects Suite or use transaction SOLAR02 and navigate to Solutions/Applications -> mySAP PLM -> Configuration Structures -> SAP cProject Suite 4.5 -> Basic Settings for cProjects.
Hope this helps.
Regards,
Pradeepkumar Haragoldavar

Similar Messages

How to check whether my sol man installation is on sol man 7.0 or?

Hellol All,
Can anyone help me How to check whether my sol man installation is on sol man 7.0 or sol man 7.0 EHP1.
Thank you,
Srihari

Hi,
Your system status should tell you that. Any logged in screen of your solution manager system --> Status. Component Version should be as "SAP EHP 1 for SAP Solution Manager 7.0" to be Ehp1 or "SAP Solution Manager 7.0"
Hope this answers your question.
Feel free to revert back.
-=-Ragu

Generation of Configuration document through Sol Man

Dear Friends,
We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
In SCPR3 t.code, in top menu,
Edit-----Add documentation.
Here i am maintaining all configuration related details. And saving as "Raw version".
The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
My client requirement is:
1. Now i am calling all the BC set in Sol Man (t.code SOLAR02, "Configuration" tab, under "type" coloum, i am selecting, "BC set".
2. Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).
How to do this?
regards
Senthil

Dear Friends,
In SCPR3 t.code, in top menu,
Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
Can we make any settings for this?
Thanks
Senthil

Latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0

Hi all,
I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
Thanks,
Toan Do

Hi Toan,
It's possible to order them or download them from SAP Marketplace
http://service.sap.com/swdc
Regards
Juan

SQL 2005 Authentication for Sol Man 4.0

Hi,
I have used the SQL4SAP.VBS to install SQL 2005 Entp Ed for Sol Man 4.0.
I do not know what authentication mode has been setup by this script
How do I know this ?
How can i change the mode to mixed mode as reuqired by Sol Man 4.0
I havent started the SAP Inst yet .
Thanks
Uday

Hi,
This is how you need to check.
1. In the Enterprise Manager, select the server and then choose Action ® Properties.
The SQL Server Properties dialog box opens.
2. Select the Security tab.
Here you can see. Hope this solves your problem. Feel free to revert back.
--Ragu

Sol Man 4.0 and Test Director 8.0

Hi,
We currently run Mercury's Test Director 8.0 (SP2) where we store all of our manual and automated test scripts.
We are also planning to use our Solution Manager 4.0 to create our project, our blueprint/configuration and from there on link our test cases to the process steps.
I've read that there is integration between Test Director.
What I'm looking for is that since all of our test scripts are stored in Test Director, is it possible to link those individual scripts to each process steps.
In the Test Case tab of Sol Man, there is the Test Case Type column with several options. If I select "Test document" and use "Web Link" to link to the test script, it would only bring me to the log-on page of Test Director upon which I would need to log-on and then search the Test lab for my script.
Just wondering if there's a way to accomplish (without downloading all of our scripts from Test Director and then uploading them to Sol Man.
Any thoughts would be appreciated.
Thanks
Danielle

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Sol Man 4.0 and Reporting out to BW

We have upgraded to Sol Man 4.0 and need to report the Change Request info, Change Document info and Transports log using an external BW box. In researching this forum, I have learned that we can export data out by activating the CRM business content. I need more guidance as to what DataSources to use. So far we have activated and found data in 0CRM_SRV_PROCESS_H and 0CRM_SALES_ACT_1, but I am missing information such as Change Advisory Board, Subject, External Reference, Decision Date, and Implementation date to name a few. Can anyone help? Is this documented ANYWHERE?? Thank you.
Charis Davenport
Project Management Specialist
The Walt Disney Company

Daniella,
Please take a look at this thread.This might help you how to integrate Sol Mngr with Test Director.
Solution Manager integration with Mercury product
Thanks
Sudhan Shan

Digital Signatures in eCATT or Sol Man

Hi All,
How can we include digital signatures feature either in eCATT scripts or in sol man.
Regards,
Justin

HI Justin,
I am afraid I cannot be of much help either as it very much seems like SAP has not extended the digital signature functionality besides it's current support for approvals of test documents and notes in the test management domain.
To be able to use this function:
SAP Solution Manager -> Scenario specific settings -> Implementation -> Document Management -> Digital Signature & Document status
Please note that there is a 'catch' here which might be of help to you : Manual test cases of type - 'Test document' can also use this feature.
I did not find any customizations possible for automated test cases like eCATT
I, myself, am not in a position to try this feature and let you know.
However, if you are interested in the document, please revert with your email id so that I can mail it to you.
Byeeee!

Sol Man Test Plan protection

Dear All,
I am workig with Sol Man 4.0. I have created the test plan in STWB_2.
Now in "Attributes" option, in top menu , under "Test Plan" option, i am protecting the test plan.
Now, i want control, except me, no one should able to "Remove protection".
How to control this?
Which authorization object controls this?
I have given only "DISPLAY" authorization for test plan. But still the user can do "remove the protection"
Please help me on this?
Thanks
Kumar

Hi Senthil,
Your question is a valid one, but I am not sure how many may have explored these nuanced requirements so far, in their projects.
So, if you have a Sandbox SolMan environment you can perhaps try to enact the following and if it works you can try in the productive environment.
I am not sure if there exists a separate authorisation to prevent deletion, but there does seem to exist a functionality that prevents 'display' to users unless the document belongs to certain 'status' that you predefine.
Authorization for the activity READ(33) in the authorization object S_IWB, is checked if the role SAP_SOL_RE_COMP is used.
From SAP help in SPRO, please read more on the section:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario-Specific Settings -> Cross-Scenario Settings -> Status for documents
You may also want to explore:
SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario-Specific Settings -> Cross-Scenario Settings -> Document Management -> Authorizations.
I could not interpret the latter for a practical use. It needs more time being spent.
If you are ever able to crack this, please let me know at [email protected]
Thanks and regards,
Srini

R/3 implementation through Sol Man

Dear friends,
We are doing R/3 implementation through Sol Man 4.0.
We have created the project in Sol Man. For all the consultants the direct access to R/3 Dev is blocked. They have to go to R/3 Dev via sol man only.
In SOLAR02 t.code, under configuration tab, we are requesting the consultants to capture the configurations under the type "IMG Object" & by giving the proper logical component, it is taking to R/3 Dev client. Then the consultants choosing the relevant IMG nodes. The same IMG nodes are getting saved in Sol Man with IMG object.
Now for example, for define order type dependent parameters, the system is capturing the IMG Object "PPPI_PO_212" .
But the consultants know very well the relavent t.code for doing the above same configuration is OPL8.
Like above, by knowing the IMG Object, can we find the t.code relevant for that IMG object?
Regards
Senthil

Hello!
In your Dev client,
Come to Display IMG screen thro' SPRO
From the menu choose,
Additional information>Additional information>Display key>IMG activity
Now the additional information column will give you the IMG object name followed by the transaction. Usually the last three/four characters.
Hope this helps.
Kathir

Sol Man Issue Management

Hi Team,
I am configuring isssue management in Sol Man. I am using SAP EHP 1 for SAP Solution Manager 7.0, ST: SAPKITL433.
I have created ZSSI t.code (Copy of SLFI).
1.When i try to create issue in DSWP and in SOLAR01, i could able to create only SLFI not ZSSI. How to get my transaction type ZSSI in DSWP and SOLAR01.
2.When i create the issue, i could not able to select the "Project" in the "Context" tab. How to link the project with an issue?
3. While creating the issue in DSWP, i need to specify the entry in the "Subject" field. I would like to add the custom defined "Subject" entries. How to add entries in the "Subject" field apart from the standard dropdown?
4. In the tab "Service Session", i could not able to assign any service sessions. How to assign this? How to create service session in DSWP?
Regards
PSK
Edited by: psk.psg on Oct 1, 2010 1:35 PM

Hi PSK!
Regarding the customizing, I think that note 1019583 would be helpful for you as it brings information on customizing in issue management. Check if you have done it correctly.
Regards,
Daniel.

Integration SAP Sol Man Service Desk and HP OV Service Desk

Hi!
We have installed SAP SM 4.0 and we also use HP OV Service Desk 4.5.And now we want to integrate both this solution.
As I understand, the interaction is realised wia web interface
In pdf file "Incident Exchange Service between HP OpenView Service Desk 4.5 and SAP Solution Manager 4.0 Service Desk" I have read what needed interface (or service) is integrated to the HP OV SD. But our administrator of HP OpenView Service
Desk sad that where no this srvice.
Are anybody know how to integrate SAP Sol Man Service Desk and HP OV Service Desk?

Hello - the document is located at http://service.sap.com/solutionmanager - media library - technical papers - Service Desk WebServices API.
However, HP is CERTIFIED by SAP to connect to this SOAP interface - the only vendor so far (Remedy and Peregrine are in process.) HP has tested this interface at SAP and recieved certification several months ago.
I would have your HP person escalate this issue higher in HP.

Sizing SOl Man and number/impact of Alerts

We are trying to access our sizing for a Sol man implementation. We
have read the sizing document and it proposes not to have more then 40
alterts per server. Is this 40 limitation at the alert group level or
the alert name level?
Example: Is the 40 limit based on a, b, c or (d and e)?
a. Database Monitoring
     b. Space management
           c1.Tablespaces
                                  system
                                       d.free space
                                       e. used space
           c2.Segments
          c3.Performance
          c4.SAP consistency
          c5.Health

Hello Jim,
Yes, this is correct for your current release and SP. There is no standard way to generate alerts for Communication Channels which are in error status. The alerting mechanism is based on messages. The message must throw an error for an alert to be generated.
However, some new functionality will be available with SP13. It does not cover exactly your requirement i.e. when a channel is in error. But it does cover channels that stop polling. See note 1808222 Trigger alerts if channel stops polling, for more details.
Regards
Mark

Unable to create EWA in SOL MAN

Hi Experts,
I configured EWA for SOL MAN....
I successfully generating alerts for satellite systems but not for own SOL MAN
Alert running successfully with PMS and Refresh sessins with out error
my RTCCTOOL not showing any errors/requiremwents...
please suggest...
version : SAP SOLMAN EHP1
Regards,
Siva.
Edited by: skreddy555 on Jan 30, 2011 1:38 PM

Hello,
So you are saying you can generate EWA reports for Satellite systems but not Solman itself?
That really doesn't give any details to the problem, as what has occured and what has not.
Is the EWA scheduled? Have you run solman_setup on Solution Manager as the managed system?
If you want to generate an EWA for Soman itself, then you also need to treat it like a managed system.
IWhat it the status in solman_ewa_adm? Is it active? If it is ther eand active it should be scheduled and then there should
be something in DSWP. Is the icon a bottle? 2 Bottles? A Red Flag? A Grey Diamond, a Document?
Is the maintenace package task scheduled and running with no errors? Are you using the SM_<SID>CLNT<nnn>_BACK RFC or the NONE RFC in SDCN as the back RFC and have you tested them?
Is SM:EXEC SERVICES finishing or cancelling? If it is cancelling is there a dump?
These are some things to check. But it is hard to even gues what the problem is because you have been so vague.
If you can describe what you have done to configure, what is working, and what seems not to be working, this would help to get an idea where & what the problem may be. But you generally need to treat the Solution Manager exactly the same as a satellite system when setting it up for EWA reporting. This make is both a managed and the managing system. So you can't skip any steps just because its the managing system. If you describe the problem in more detail, and if any part in the process is working, and what is not, that is helpful.
You should see it schedulied in DWSP. If not, then it's not scheduled. But the status in DSWP can tell a lot. A Red Flag means a problem with SDCCN tasks or the RFC, a Grey Diamond means important data is misisng and the report can't be generated, so that is a probelm is data collection, two flasks indicates sm:exec services has not run or is failing.
So you really need to give more information....unless I have already touch upon your problem, I don't know how helpful people can be but toss out general information.
I'd like to help more if you can give more details to what you see and don't see that you should.
Regards,
Paul

How do I access the web utility with model cisco sf302-08p ?

Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?

restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity

How do I access CProjects in Sol Man

Similar Messages

Maybe you are looking for