How do i access my iphone when it is disabled and not connecting to itunes

my iphone has been disabled and not registered with iTunes how do I access my phone I have a passcode

You need to put the device into restore mode and restore it
  http://support.apple.com/kb/HT1808
Then Restore the device.
  http://support.apple.com/kb/HT1212

Similar Messages

  • How do i unlock my ipad when it's disabled and says connect to itunes

    how do i unlock my ipad when it's diasabled and says connect to itunes?

    Please see: http://support.apple.com/kb/HT1212 for full details.
    Regards,
    Steve

  • HT1766 how to fix iPod when you are disabled and not connected?

    my iPod is totally disabled i tryed to connect to itunes but i can't because it is disabled.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have an iphone 3 that is disabled and says connect to itunes

    I try connecting it to itunes but it is disabled with a password lock on it, i connect it in my laptop then it comes up with "connected with a password" so i cant restore it because it will not fully connect any ideas that would help me because im really stuck it wont do anything!

    Hello Irenemikayla
    You would need to put your iPhone into recovery-mode by restarting your iPhone and then holding the Home button until you see a Connect to iTunes logo and then you should see that you will be able to restore in iTunes.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Regards,
    -Norm G.

  • How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?

    How can I access an iPhone when I receive a message saying iPhone disabled connect to iTunes?
    Tried connecting to itunes and hitting restore and get a error message 3194.
    Any help would be greatly appreciated.

    odds are entering password too many times

  • How do i reset my iphone when it is disabled

    how do i reset my iphone when it is locked and disabled?  I do not know the password either!

    Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes.

  • How can i locate my iphone when it is stolen and switch off?

    how can i locate my iphone when it is stolen and switch off?

    If it's turned off, then you can't locate it.

  • How can you get your ipod touch open when you forgot the password and its disabled and not connected to wifi

    How can you get your iPod touch open when you forgot the password and its disabled and not connected to the Internet Connection and you don't want to reset it.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • HT4061 Hi have iphone 4 has been disabled says to connect to itunes when I do that it says enter passcode on phone but it won't let me any ideas

    Hi have iphone 4 has been disabled says to connect to itunes when I do that it says enter passcode on phone but phone won't let me do that

    Hey drcajkm,
    Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • My iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(

    my iphone 4 says activation required and then connect to itunes and when i try to connect it wont what do i do (i cant use it at all) :'(

    i got it from O2... and it dosent do anything when i plug it into my laptop it dosent come up at all or connect to itunes

  • HT1212 how to unlock ipod touch when disabled and says connect to itunes

    how to unlock ipod touch when disabled and says connect to itunes?

    The answer is in the article you asked this question from: http://support.apple.com/kb/HT1212

  • How can I restore my iphone if its disabled and says connect to itune?

    Last week i changed my password and i forgot it. i tried to remember it and tried to type all the numbers comes out in my mind and it got my phone disabled and says connect to itunes. My iphone haven't sync yet on any devices.What should i do ? Help?

    The following has instructions. Note that it has a section for cases where the phone has never been synced. http://support.apple.com/kb/ht1212

  • My ipod touch is disabled and says connect to itune but when i i connect it says it cant cuz it has a passcode so now i can disable it what can i do

    my ipod is disabled and says connect to itunes but when i connect it dosent let me connect cuz it says it has a passcode so i can get it out of disabled mode what can i do

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.

    My iPhone 5S says it's disabled and to connect to iTunes, iTunes says it needs 4 digit pass code. I tried to restore it but device wasn't recognised. Any ideas? I only got it yesterday.

    How did the passcode get on the phone to begin with, if you "only got it yesterday"? Regardless, to remove it, you'll have to force the phone into recovery mode, as described here, & restore it:
    http://support.apple.com/kb/ht1808
    This will remove the passcode.

  • HT1430 my ipod id disabled and says connect to itunes how do i get ipod working again

    My ipod is disabled and says connect to itunes, i can't seem to get it working, help!!!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Maybe you are looking for

  • Running a Java application from a Swing GUI

    Hi, I was wondering if there is a simple way to run a Java application from a GUI built with Swing. I would presume there would be, because the Swing GUI is a Java application itself, technically. So, I want a user to click a button on my GUI, and th

  • Need help for a function

    hii all i am somehow unable to find a function for finding the current month i.e. i want to find the records for the current month plzz help me with the problem mandar

  • Nested styles in CS2. Absence of property appliedNestedStyle

    In task I'm working on there is a subtask of extracting overrides from the text. The way I implement it is pretty straightforward: I iterate through all textStyleRanges. With each textStyleRange object I compare its style properties with style proper

  • Consistency check Error in Administration Tool

    Hi I am Ramana, When I do a consistency check in OBIEE Administration Tool I get the following error: [nQSError: 15001] Could not load navigation space for subject area SCOTT Can anyone Tell what is the error

  • Messenger Express 6 Unable to display embedded images

    Hi Messenger Expresss seems tob unable to display embedded images (gif or jpeg) in the form cid:image.gif and some hosted images. In reference to the the cid:image.gif , when I open the email get an error from the browser that states "Warning: the ap