How do I access my raw settings for further use?

I opened a jpg in CR, made some changes, opened the image, then saved (from within PS) and closed it.
Later I needed to create a duplicate of this image and apply the same CR settings I'd used, but I can't find them. When I open the original jpg, all of the CR settings are set to zero.
Is there any way I can access the CR settings I entered? I want to see what they are, not delete them, not get back to the pre-CR-edit stage.
If this is not possible, what could I have done otherwise to retain access to my CR settings? Should I have saved the image from within CR? If so, how would the CR settings be availalbe for tweaking or copying?
Is there an automatic xmp file that would have this info, and if yes, where would i find it?
Finally, how do I save CR settings in the future for subsequent access?
Many thanks!

The xmp data is written into the original jpeg file, not a sidecar file.
Here's the drill (I'm doing it as I write this msg):
1. Select a jpeg in Bridge.
2. Right click on the image and select Open in Camera Raw...
3. Perform an edit (I did a drastic exposure reduction to make the edits obvious).
4. Click on Open Image, comes up in Photoshop with edits.
5. Shutdown PS and Bridge.
6. Re-open Bridge, select and open same image.  Opens in Camera Raw automatically, shows edits, and new CR settings.
As I stated in my earlier post, the only way to "de-Camera Raw" the jpeg image is to clear settings from within Bridge.  Again, the jpeg is being re-written with the edits within the file as exif data.  And no, there is no message that such a re-write is occurring.
Richard Southworth

Similar Messages

  • How do you access full printer settings for printing?

    I wanted to print something for the first time yesterday.
    I've got 3 printers attached used for different things.
    When I selected print it brought up a basic print box that let me choose printer, paper type and size, but I couldn't access any more specific settings - specifically one of my Canon printers has A4 paper loaded in a tray for documents and 6x4 paper in the auto sheet feeder - I couldn't find a way to change which paper source to use, and the printer is in another room conneceted via an Airport Express to save a bit of space.
    Is this another 'dumbed down' feature of iLife '08?
    AC

    The Advanced tab comes up after you press print on the 'simple screeen'.
    Oh Well.
    Ac

  • How do you access full printer settings for printing? (sorry if duplicate)

    I wanted to print something for the first time yesterday.
    I've got 3 printers attached used for different things.
    When I selected print it brought up a basic print box that let me choose printer, paper type and size, but I couldn't access any more specific settings - specifically one of my Canon printers has A4 paper loaded in a tray for documents and 6x4 paper in the auto sheet feeder - I couldn't find a way to change which paper source to use, and the printer is in another room conneceted via an Airport Express to save a bit of space.
    Is this another 'dumbed down' feature of iLife '08?
    AC

    on the first print page click print after you have done any themes, etc you want. On the second print page click advanced - you should find them on the thrid page then
    Larry Nebel

  • How do I get camera raw plugin for cs5.1 extented for new olympus omd e-m1 camera?

    how do you get camera raw plugin for cs5.1 extented for new olympus omd e-m1 camera?

    Native support requires ACR version 8.3, which will only run under CS6 or CC.
    Use the free DNG converter to make DNGs readable in older ACR versions. http://www.adobe.com/downloads/updates.html

  • How can you access the printer settings in CS5 when using Epson 4900?

    How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

    Open the print dialog box, click "print settings".

  • How could I set the proxy settings for just some URLs and not for all?

    Hello,
    I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
    I know that I can set the proxy settings in the system properties, and this works perfect.
    But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
    How could I set the proxy settings for just some URLs and not for all?
    Thanks

    java.net.URL.openConnection(java.net.Proxy proxy)
    @since 1.5

  • How to How to get FI field status settings for General data

    Hello All,
    Can you please tell me How can I achieve field status settings for General data.
    I have some code to get field status settings for account assignment block but I need General data block data.
    Can you please help me with the same.
    I got the below code to get field status settings for account assignment block But I need General data block information.
    FUNCTION z_fieldstatus_getdetail.
    *"*"Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(I_BSCHL) TYPE BSCHL
    *" VALUE(I_BUKRS) TYPE BUKRS
    *" VALUE(I_SAKNR) TYPE SAKNR
    *" TABLES
    *" T_COBLF STRUCTURE COBLF
    *" T_FIELDS STRUCTURE TCOBF OPTIONAL
    *" EXCEPTIONS
    *" ERROR_MESSAGE
    * liefert Feldstatus in Liste t_coblf:
    * Feldname (DDIC) nicht in der Liste -> Feld ausgeblendet
    * Feldname (DDIC) in der Liste -> Feld eingabebereit
    * required = 1:
    * Mussfeld;
    * required = 0: kein Mussfeld
    * active = 0: Feld ausgblendet
    * Als Hilfstabelle wird die gesamte Feldliste der Felder (t_fields)
    * ausgegeben,
    * deren Eingabebereitschaft im Customizing steht
      DATA: ls_faus1 LIKE tbsl-faus1.
      DATA: ls_faus2 LIKE tbsl-faus2.
    * Feldstatus holen
      CALL FUNCTION 'FI_FIELD_SELECTION_DETERMINE'
        EXPORTING
          i_bschl     = i_bschl
          i_bukrs     = i_bukrs
          i_saknr     = i_saknr
        IMPORTING
          e_faus1     = ls_faus1
          e_faus2     = ls_faus2
        EXCEPTIONS
          customizing = 1
          OTHERS      = 2.
      IF sy-subrc <> 0.
        MESSAGE a613(/ssc/comon).
      ENDIF.
      DATA lv_char.
      DATA int_coblf LIKE coblf OCCURS 0 WITH HEADER LINE.
      DATA p_cobl LIKE cobl.
      DATA: dummy_ktosl LIKE bseg-ktosl.
      PERFORM kontierungsblock_ermitteln(sapff001)
      TABLES int_coblf
      USING lv_char(1)
      ls_faus1 ls_faus2 dummy_ktosl.
      t_coblf[] = int_coblf[].
      SELECT * FROM tcobf INTO TABLE t_fields.
    ENDFUNCTION.
    Thanks in Adv.
    Kaustubh

    Hi ,
    Looking at the question the first thing that comes to my mind is what is the organization structure that you are following .
    As you have mentioned that you have used segment insted of profit center for splitting , what is the scope of profit center in your implementation .
    in implementations where locations are devided as profit centes it becomes very necessary to mandatorily split the documents based on profit center .
    in your case as you have set it as segment i dont find it an issue of you keeping it as optional as it will not give you and error during your operations , as you have made profit center optional in splitting charcteristics .
    hope this suffices .
    Regards ,
    Dewang

  • How to turn off "Adobe PDF settings for Autodes AutoCAD documents" dialog box between pages of a batch conversion?  There is a check box for this purpose, but it is grayed out, and of course unusable?!

    How to turn off "Adobe PDF settings for Autodes AutoCAD documents" dialog box between pages of a batch conversion?  There is a check box for this purpose, but it is grayed out, and of course unusable?!

    How to turn off "Adobe PDF settings for Autodes AutoCAD documents" dialog box between pages of a batch conversion?  There is a check box for this purpose, but it is grayed out, and of course unusable?!

  • How to change the contact sync settings for icloud? please advise

    how to change the contact sync settings for icloud? please advise?

    There are no settings to change. Assuming you are using Lion 10.7.2 (or 10.7.3) - which you should be - you simply sign in in System Preferences>iCloud and check 'Contacts' and any other data you want to sync.
    If you are using an earlier system you will not be able to sync your contacts, and there is no workaround. However you can sync them with Google or Yahoo contacts, though I don't know how well this works.

  • I work for the Los Angeles Unified School District. I am looking for a way to remove or hide access to the settings on iPads using Apple Configurator (V1.7.1). Can anyone assist?

    I work for the Los Angeles Unified School District. I am looking for a way to remove or hide access to the settings on iPads using Apple Configurator (V1.7.1). Can anyone assist?

    A similar question came up yesterday. One of the responders posted this:
    Consider DEP, Device Enrollment Program. This will establish the company as the owner of the device.  It will lock an MDM to the divice which in turn will lock profiles to the device.
    Quick overview of zero-touch MDM enrollment, DEP
    http://www.apple.com/education/it/dep/
    "This document offers guidance on some important considerations for getting the most out of your iOS deployment." Covers: Prepare your infrastructure.  Set up devices.  Configure and manage devices.  Deploy apps and content.  Plan for support.
    https://www.apple.com/ipad/business/docs/iOS_Enterprise_Deployment_Overview_EN_F eb14.pdf
    [DocumentBodyEnd:d1616e95-b4ff-4e33-bf0b-3835cf3236c0]

  • Raw support for NEX6 using elementsV11

    raw support for NEX6 using elementsV11

    you need camera raw 7.2 or better:  http://www.adobe.com/downloads/updates/
    or, you can use DNG Converter 7.4 update (@ same link as above).

  • How to transfer pages document to iPad for further reading/editing???

    How to transfer pages document to iPad for further reading/editing??? After creating a doc on iPad with Pagesand exporting to my Mac Pro, how do I transfer it back to my ipad???

    its not as easy as it might be, hopefully an automatic sync will be sorted soon. i thought this article was helpful
    http://gizmodo.com/5508935/ipad-test-notes-how-to-transfer-iwork-documents-to-an d-from-your-computer

  • How do I access Camera Raw Plug-in for PSE 11?

    I can't figure out how to access the Camera Raw plug-in for Photoshop Elements 11 ( on a Macbook Pro OSX.)  I recently installed  PSE 11, and when I select "about plug-in" within the app, it brings up a box that shows version 7.1.0.354.  Does that mean it's already installed?  If so, how do I access it to edit a photo? In past PSE versions I simply chose "Open file / as Camera Raw" but that option doesn't come up.

    In the File Open dialog ensure you have All Readable Documents selected for Enable.
    Click on the file you want to open
    Change the Format to Camera Raw

  • How do I access camera raw from withing Lightroom

    Bear with me as I am new at this. I am trying lightroom and have read several reviews of 1.1 and Camera Raw 4.1. I read Martin Evening's update on 1.1 and he has a whole section on using CR to make adjustments to the raw file.
    I imported several raw images in nef and dng formats into lightroom. I cannot see any way to open Camera Raw from any of the menues in lightroom. Could someone tell me how I get to Camera Raw 4.1 from within lightroom?
    I have no problem accessing the image in Camera Raw from Bridge. It was my understanding that you do not need Bridge, just Lightroom to use Camera Raw.

    ACR operates as a plugin within Photoshop or Photoshop Elements and does not operate on its own.
    Lightroom is a separate software program which incorporates the ACR conversion processes for working with raw files. It does not require your having Photoshop installed on your computer.
    I think Adobe has created a lot of the confusion in re naming the program "Adobe Photoshop Lightroom" from the earlier name of "Adobe Lightroom" since it is not a part of Photoshop.

  • How do I access camera raw in PSE 11?

    I can't figure out how to access the Camera Raw plug-in for Photoshop Elements 11, on a Macbook Pro OSX.  In PSE, when I select "about plug-in" it brings up a box that shows version 7.1.0.354.  Does that mean it's already installed?  If so, how do I access it to edit a photo? In the past PSE versions I simply chose "Open file as Camera Raw" but that option doesn't come up.

    Photoshop Elements is not part of the Cloud, please ask in that forum
    Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements

Maybe you are looking for