How do I access my work mac from my home mac?

how do I access my work mac from my home mac?

Your best choice would be to use Back to My Mac with your iCloud Account. For more informatio please see the following topics.
OS X: Using and Troubleshooting Back to My Mac with your iCloud account
http://support.apple.com/kb/HT4907
OS X: About Back to my Mac security with iCloud
http://support.apple.com/kb/HT4908
Hope this helps you and let us know how it goes.

Similar Messages

Remote access my office mac from my home mac

I know this is not the right forum for this, but I am not sure which one is and so I am asking this question here in the hopes that someone will direct me to the right place.
If I want to access my office mac from home, what program do I need to use? (Apple Remote Desktop?) Where can I find detailed instructions?
Other pertinent details:
I have a PB at home and one at the office, both running OSX.3.
Both are on a wireless network.
Office is behind a firewall.
Because both computers are on a wireless network, their IP addresses are of the form 10.0.1.xxx. Turning on File sharing on the office computer and then doing "ssh [email protected].....etc. does not seem to work.
Ideally I want to be able to remotely run programs on the office computer. I know this ability exists for Windows XP (and my colleagues use it), so it MUST exist for Macs.
Any help will be much appreciated.
Thanks,
NS

ns,
Apple Remote Desktop and Timbuktu Pro are worthy programs; you can achieve the same effects with free VNC (virtual network connection) software. Essentially, you set one Mac up as a VNC server, the other as a VNC client, and connect the client to the server. Check Version Tracker and/or MacUpdate for such freeware as VNCThing (OS 9 client), OSXvnc (OS X server), and Chicken of the VNC (OS X client).
The firewall will require you to set up port forwarding. I've actually found the FAQ and help info at the site for the Windows program UltraVNC along with PortForward more than enough to figure how to set up a VNC link to a Windows PC in my wife's office that could be accessed by either my office Mac (before turning on the link encryption) or her home PC. Adding / using SSH is somewhat more complicated and outside of my firsthand experience, but there are references at e.g. SSH VNC Tunneling (try Googling "SSH VNC Mac"). See for example:
Homemade Dot-Mac: Remote Control
MacMod - Your Mac Modding HQ
VNC Sessions From Off-Campus
Note that if you have the usual dynamic IP account at home and a static IP at work, it will be easier to set up the work computer as the server since the IP number will be a fixed address. If both computers are on dynamic IP accounts, the server's IP number will have to be checked locally before connecting remotely (one reason ISPs can charge extra for static IP accounts).

How can I create a working link from the home page to other pages?

Using iWeb, I created links on the Home page directed to other pages within my web site. The links are located in the main body of the Home page (on the right side) and are not included in the Navigation Menu. The links function correctly when I test them in iWeb, however, the links do not function at all after publishing to the internet.
Within the inspector, I have chosen, Link To: "One of my pages" and the appropriate page is selected.
The links within the gray rectangles do not function. The same links below the gray rectangle links go to a "Page Not Found" page.
See the home page at http://www.daleenstrom.com
How can I make these links function correctly?

Welcome to the Apple Discussions. I've found that using the "One of my pages" often doesn't work. Since you've published the site go to each page, copy its URL and use it for the hyperlink. I've found that to me more reliable.
Are those two links inside the shapes or just on top? Both of those items are one large image file. If you inserted the link in the shape be sure you've selected the text (might take a few clicks to get inside and select it) to use for the hyperlink. Also make sure there are no other objects overlapping each of the shaped with the hyperlinked text.
Also it appears that the entire text box is an image. Turn on iWeb's preferences to display the text image indicator:
Click to view full size
and then you'll see the following on any object that will be converted to text once published:
Click to view full size
The two links below work for me. Be sure to clear your browsers cache (CommandOptionE for Safari) and reload the page.
OT

How do I access photoshop and illustrator from the creative cloud on my i mac?

how do I access photoshop and illustrator from the creative cloud on my i mac?

Log in to your Cloud account to be able to download and install
Some general information
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html

How to i access find my iphone from my mac

How do i access find my iphone from my mac

Ensure you are logged into your iCloud account in System Preferences then sign into icloud.com via your Safari browser.

How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed and you don't know what it is now?

How do you access updates to apps from the App store after changing to a new ID because the password on the old ID was changed by the former husband and you don't know what it is now? And you set up your own new ID and account but can NOT access the updates, from the App store for the many apps that you already have, because they require that you sign in with that former now inaccessible ID and account and password? Call it a problem of modern times and changing relationships, if you want to be charitable.

So I guess it will only be new apps that I download that are allowed to give me their updates while 13 updates wait for me on an ID I can no longer access.
Yes... sorry.
In the future, if need be, you can re download your purchases for free > Downloading past purchases from the App Store, iBookstore, and iTunes Store
Good rule of thumb is to back up your purchases regardless > Mac App Store: Backing up your app purchases

My ipod touch has a huge collection of music that I don't want to lose or replace but my computer has now crashed beyond recovery. How can I access my itunes account from another computer or transfer my playlists to another computer from my ipod?

My ipod touch has a huge collection of music that I don't want to lose or replace but my computer has now crashed beyond recovery. How can I access my itunes account from another computer or transfer my playlists to another computer from my ipod?

You can transfer iTunes purchases to your "new" computer by
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
You can transfer other stuff by:
Best iPod to PC
How to transfer or sync files from iPod to PC - Windows mac iPhone iPod software reviews - Software Wiki

How do I access my iCloud account from my PC?

How do I access my iCloud account from my PC?

download and install Apple Safari and access www.icloud.com from it. (this worked for me when using Internet Explorer did not.

RE: How do I access deployed TOOL libraries from mycode?

Hi Martin,
sorry for the late answer but I hope it is still helpful.
First: In the workspace you make your distribution from, check whether
you really have library icons.
Second: Make the distribution and run it from the partition workshop.
Startup should fail when you do not have the libraries installed. If you
install them later and you can run that distribution then, you can be
sure that you use your library.
Third: Sometimes it is difficult to import the library pex-file into
your workspace when there are already plans with that name. To overwrite
them you can use a traceflag (cfg:c4:14:14:1). But take care! this will
overwrite!!! Do not overwrite them before you put your libraries sources
into another repos. If you did it by accident, at least do not integrate
until you saved the original code.
Hope this helps. If you have more question please feel free to contact
me.
Uli
Ulrich Beutenmüller
TechnoData GmbH
Germany
-----Original Message-----
From: Martin G Nystrom [SMTP:[email protected]]
Sent: Thursday, October 15, 1998 12:56 PM
To: [email protected]
Subject: Re: How do I access deployed TOOL libraries from my
code?
Excellent! Now can I be sure that my client application is using the
deployed
library, not bundling its own when I distribute the application?
-Martin
Karoly <[email protected]> on 10/14/98 05:55:43 PM
To: Martin G Nystrom/AM/LLY
cc:
Subject: Re: How do I access deployed TOOL libraries from my code?
Martin,
Here is how it works:
When you create a library distribution, part of the result is a
'Library
Definition' pex file (located under the 'appdist') like this:
C:\forte\appdist\EnvName\LibName\cl0\generic\LibName\LibName.pex
You would import this pex file into a workspace, after which it
would
appear
as any other Forte library.
Once integrated, the library can used by other plans as a supplier
(remember
to 'install' the library from E-Console).
Hope this helps,
Karoly Kojnok
Martin G Nystrom wrote:
We have a lot of plans that contain "business objects" that ourclient
applications share. I'd like to deploy these plans as TOOLlibraries (not
compiled) and then have my deployed applications use them. Myquestion is:
How do I access the library?
Some possible answers:
1) Just include it as a supplier plan, it will automatically use thedeployed
TOOL library
2) You have to programmatically load it using task.part.findLibrary
3) The help says I can "import it into my repository" -- how do I dothat?
-Martin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Excellent! Now can I be sure that my client application is using the deployed
library, not bundling its own when I distribute the application?
-Martin
Karoly <[email protected]> on 10/14/98 05:55:43 PM
To: Martin G Nystrom/AM/LLY
cc:
Subject: Re: How do I access deployed TOOL libraries from my code?
Martin,
Here is how it works:
When you create a library distribution, part of the result is a 'Library
Definition' pex file (located under the 'appdist') like this:
C:\forte\appdist\EnvName\LibName\cl0\generic\LibName\LibName.pex
You would import this pex file into a workspace, after which it would
appear
as any other Forte library.
Once integrated, the library can used by other plans as a supplier
(remember
to 'install' the library from E-Console).
Hope this helps,
Karoly Kojnok
Martin G Nystrom wrote:
We have a lot of plans that contain "business objects" that our client
applications share. I'd like to deploy these plans as TOOL libraries (not
compiled) and then have my deployed applications use them. My question is:
How do I access the library?
Some possible answers:
1) Just include it as a supplier plan, it will automatically use thedeployed
TOOL library
2) You have to programmatically load it using task.part.findLibrary
3) The help says I can "import it into my repository" -- how do I do that?
-Martin
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

HT2954 How can I access my imac mail from a different computer other than Apple?

How can i access my imac email from a differnt computer other than
apple?

If you are using IMAP mail connection (IMAP keeps the mail on the server), then you just configure the other computer's mail client to access the same account.
If you are using a POP mail connection, then the mail is generally downloaded to your Mac and deleted from the server. That is a much more difficult problem to solve. NOTE: Google's gmail does have a POP option that does NOT delete the mail on the server, so it is accessible via the gmail web page.
A lot depends on what you are using for your mail service and whether you are using IMAP or POP protocols.

How can i put my itunes library from an old mac g4 10.4.11 to an ipod2?

How can i put my itunes library from an old mac g4 10.4.11 to an ipod2?

Install iTunes 9.2.1 on your computer. If the device's requirements specify iTunes 10 or newer, you need to purchase Mac OS X 10.5 on DVD.
(63879)

I have converted a pdf to word. How can I access the Word file from my online account?

I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

Hey Fabrizio,
You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
Do you get the 'download' prompt?
Also, you can find the converted files by clicking at the 'Files' tab.
Please try the same using a different browser and check.
Hope to hear from you.
Regards,
Anubha

I have a macbook and now I have a Macbook Air, So my question is how can I transfer all my stuff from my old mac to my new mac air?

I have a macbook and now I have a Macbook Air, So my question is how can I transfer all my stuff from my old mac to my new mac air?
Thanks

How to use Migration Assistant to transfer files from another Mac
MacBook Air- Use Internet Sharing to optimize data migration
Migration Assistant tips and tricks
OS X Lion- How to use Migration Assistant to transfer files from another Mac

How do i access my icloud accound from my pc

how do i access my icloud accound from my pc (Windows 7)

www.icloud.com
Or download the iCloud control panel for Windows and use it with Outlook.

How do I access my iCloud files from my ipad?

How do I access my iCloud files from my ipad?

Try using the PC to launch www.icloud.com

How do I access my work mac from my home mac?

Similar Messages

Maybe you are looking for