How do I achieve this effect with a drop cap letter?

How do I achieve this effect with a drop cap letter as shown in the picture below in indesign?:
Thanks.

Apply drop caps then select the letter and create outline from type menu. Select the outline letter and apply drop shadow

Similar Messages

How do I achieve this effect in Photoshop CS5?

Hi all,
I'm using Photoshop CS5 and I'd like to know how can I achieve the following effect: I have a full color picture of a woman, like the one below, and I would like to replicate this effect in which the full color woman is blended with the background turning her into purple and black only.
I'm a newbie, and I am not too familiar with the 'channels' concept, so I would appreciate some specific reply -not necessarily step-by-step but almost, lol!
Thanks a lot in advance!

Instead of using channels, you can convert your image to black and white then create a new layer and fill that layer with your color of choice, then either use the blend modes and/or reduce the opacity until it looks good to you.
Another way is use the black and white adjustment layer and enable the colorize check box and choose purple.
If I recall the hue/saturation/luminance adjustment layer also has a colorize check box. (I would check but I am in the process of redoing my drive)

How do I achieve this effect (Fireworks)?

Hey guys!
I'm brand new to the forum and a very "green" web designer. I'm hoping that someone wouldn't mind sharing their expertise with a newbie such as myself with what I fear is a very easy problem, haha.
In the following link there is a graphic in the upper-left corner that reads "Gateway Studios." The word "Gateway" is transparent so that it shows through the orange block and allows the background to come through:
http://themeforest.net/item/gateway-studios-for-wordpress/full_screen_preview/82145
I am interested in recreating this effect. What sort of process(es) would I need to perform to duplicate this outcome? The images is saved as a .png, so I'm wondering if I need to use Fireworks. I have CS4 and am eager to apply this effect to some of my graphics.
I know that there is likely an extremely easy solution to remedy this problem, however, as I stated before I am very new to all this. Any response would be greatly appreciated!

First off, thank you both for your quick responses! I really appreciate the help from people who are way more knowledgeable than I am and can take the time to work with those in need of assistance (which I most certainly am, haha).
Marian, I actually already know how to make the canvas transparent and perhaps this is something I should have been more clear about in the OP. What I am actually going for is the effect where the word "Gateway" is allowing the background to show through the orange layer so that it looks like a cut-out...does this make sense? I know I'm probably not using the correct terminology, but it's the best way I know how to explain it.
I did go through some of the threads in the Fireworks forum but didn't find anything particularly useful.
I read the article you suggested as well and found it to be very helpful! I look forward to applying that technique once I get this image squared away! I just really want to get that cut-out effect going!

How do I achieve this effect?

I have my kids picture with black background. I am trying to achieve this. What would be the basic steps to do this? I can post my picture somewhere if that helps.
http://www.betterphoto.com/gallery/dynoGallDetail.asp?photoID=6367054

Check out some Photoshop painting tutorials. Here are a couple to get you started:

Newbie - How do I achieve this effect please?

Hi Folks
I'm really quite new to Photoshop, and am trying to learn as I go. I wondered if someone could advise me how to achoieve the layered effect shown in the attached?
Also if I was using a similar picture, what is the best way to 'blend' the left hand side of the image into a light/white background?
Any advice really would be appreciated. I'm using CS4.

Like has been said to me before, there are a 100 ways to do any one thing.
Another easy way is simply using a gradient mask.
Take the image, placed over a white background,
Target the image layer then choose the Create Layer Mask at the bottom of the layer tool bar.
Now choose your gradient tool
and drag it accross the image to taste.
Hope this helps
The advantage to this way is that it does not harm the original and if you don't like the result of the first time you swipe the tool accross it, you simply swipe your grandient tool accross again.
Message was edited by: Joprysko

How do I achieve this effect? Is it over-sharpening?

I have a request to use this style on a photo. I think it has something to do with over-sharpening but not sure how to best do it. Advice greatly appreciated, thanks!

I t looks over sharpened. It might have also been done by duplicating the layer, setting the blend mode to overlay and using the highpass filter, under Filters>Other>Highpass.

How do I achieve this effect please?

I would like to create text boxes on the page with curved edges like ths, how is this done please?

There are a few different ways to do this - this is one:
http://www.cssplay.co.uk/boxes/four_cornered.html
and another:
http://www.webcredible.co.uk/user-friendly-resources/css/css-round-corners-boxes.shtml
Another way: is to use a background for the top rounded area (title), a repeating-y image for the content area and another background image for the bottom rounded section.

Achieve this effect with particles? Help pls!

Hi all,
Very new to the whole motion graphics field andI could use some help. I need to replicate the starfield effect from this video. When the tiled backgrounds swoop in, the stars move with them. On the video I have created, the particles (firstly) don't fill the screen, and when I move the camera the unit moves out of view (obviously).
Is there a way to create the particles so they cover the canvas and move with the motion of the tiled walls?
https://vimeo.com/43739119
Thanks in advance for any help; I've found this forum very, very useful indeed.
Cheers!

Place your "stars" in their own group, make it a 2D group, they won't move with the camera but stay with the frame as normal.

How to achieve this Effect?

Hey everyone i was wondering if you guys had any idea how to achieve this effect in flash.....http://www.youtube.com/watch?v=QftcJtvLr8g

While you could probably do this in Flash, it is much more simply done using AfterEffects. There's a splendid text tool that can be tortured into effects like this. Have a look at the podcasts from Creative Cow on AfterEffects for some interesting examples.

Does any body no how to achieve this effect in ae or premiere pro cs5

looking to see if any1 can help me achieve this effect for my music videos http://www.youtube.com/watch?v=xIBEl35_wB0&feature=related is there a plug in like fcp or a easy way to achieve this appreciate any help thanks....

I'd use a loopOut expression on 3 keyframes for opacity. I'd also probably experiment with blending modes and throw in the exposure effect to get the flash at the end. A 32 bit comp will help you get a better blending mode with the footage. This will get you blink effect down, then simply cut to the revealed video. You'll end up with 3 layers in your composition. The bottom layer, the blinking layer, then then a duplicate of the blinking layer without effects.
The loop out expression is prewritten for you and requires no modification. You'll find it by clicking on the icon just to the right of the pickwhip expression and selecting Properties.
Your blink layer's opacity property should look like this:
The first and last keyframes are set to 100, the middle, as you can see is set to 10% but it's a matter of personal preference. This will give you 2 frames of full visibility and one at 10%. Changing the spacing of these 3 keyframes changes the look of the blink.

How to achieve this effect, please?

Hello
I have an image here:
http://stevehigham59.7host.com/orange.jpg
How would I achieve that effect, please - with the different shapes and colours against that blue background inside a blue frame? I'm just wondering where to begin.
Thanks for any advice.
Steve

Many thanks to you all for your replies.
I haven't got Illustrator, I'm afraid so Photoshop will have to suffice.
I've saved all replies and will try out your suggestions.
Thanks again.
Steve

How do I get this effect?

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3244557723_1857154
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
Hi!
I have a series of QuickTime files that I am trying to
present in a nice
interface. I know how I can create this effect in Flash- but
given the
number of .movs I have, I am thinking of sticking to QT. The
example I have
in mind is
http://www.apple.com/aperture/quicktours/
I went through the source code and tried to replicate it by
changing some of
the values but it does not seem to work. I thought about
using frames to
ease complication but I find frames cumbersome. I am open to
suggestions but
would prefer to keep the video clips in QT versus converting
to FLV.
Thank you.
Kelvin
--B_3244557723_1857154
Content-type: text/html;
charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>How do I get this effect?</TITLE>
</HEAD>
<BODY>
Hi! 
 
I have a series of QuickTime files that I am trying to
present in a nice in=
terface. I know how I can create this effect in Flash- but
given the number =
of .movs I have, I am thinking of sticking to QT. The example
I have in mind=
is <a href=3D"
/aperture/quicktours/</a> 
 
I went through the source code and tried to replicate it by
changing some o=
f the values but it does not seem to work. I thought about
using frames to e=
ase complication but I find frames cumbersome. I am open to
suggestions but =
would prefer to keep the video clips in QT versus converting
to FLV. 
 
Thank you. 
 
Kelvin
</BODY>
</HTML>
--B_3244557723_1857154--

Hi(Bonjour)!
Welcome to the forum.
It will be difficult to compose this effect in FCE without commercial plugins like Nattress's Big Box of Tricks (G Glow dissolve).
But you can try this: create a colorized transparent document (yellow and red around the frame) in Photoshop. Save in PNG. Import into FCE.
Put it on V2, over the edit point for your video clips in V1.
Try to keyframe opacity values, animate the position with erratic displacements and add some twirling or distord effects (that can be keyframed too).
With some patience, I'm sure that you can achieve a such effect.
Michel Boissonneault

I want to delete my current exchange account. How can I achieve this and not lose stored information such as contacts, photos etc. please help. Thank you.

I want to delete my current exchange account and replace it with my new one. How can I achieve this and not lose my contacts, photos, etc associated with this account? Please help..
Thank you,

Bad idea.
What information do you want to share, exactly? You can share contacts, reminders, and calendars with other iCloud users without the need for both of you to use the same iCloud account. You can authorize both phones to use apps purchased under the same Apple ID without sharing an iCloud account.
Sharing an iCloud account is a bad idea in general. There is too much opportunity for someone to damage or delete data that will affect both.

How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls h

How do i get this effect in the video 0:7 - 0:8 That the lines come together and build a logo? pls help me http://www.youtube.com/watch?v=mfU8bZDKAMQ&list=HL1352499622&feature=mh_lolz

This looks like the final logo was created with several layers probably in Illustrator, then the file was most likely imported into After Effects and revealed by animating mask paths.

Cool effect..how can i create this effect on Motion 3?

that's great.
Someone please tell me how can i create this effect on motion 3?
http://www.ayatoweb.com/aetips_e/ae17_mov05e.html
thanks

Use the bezier tool to create your shapes, give the shapes an Airbrush outline. Then apply a Write On behavior to each shape. Position the shapes in the timeline so they appear sequentially. To achieve the zooming out effect, you can either scale the whole group, or convert the group to 3D and use the camera to zoom out.

How do I achieve this effect with a drop cap letter?

Similar Messages

Maybe you are looking for