How do I acquire waveforms in LabVIEW on multiple trigger conditions on a Tektronix TDS5000 scope? The signals are fast, so is there a way not to use a simple loop in LabVIEW?
The signals are fast, so is there a way to acquire them without losing information? Do I have to use a loop in LabVIEW that just acquires when the trigger conditions are met?
Hi,
I would assume that the instrument has some sort of buffer that could store data while you are trying to download it. If this is not possible, you could use one of our DAQ cards to acquire data.
Hope this helps.
Best Regards,
Aaron K.
Application Engineer
National Instruments
Similar Messages
-
does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?
Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content. -
Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7.0.3?
Has anyone noticed how easy it is to read a passcode that lights up with each key you press from across a room? Is there a way to stop keypad from lighting up on iPhone 4S, iOS 7.0.3?
-
How do I get my incoming emails in Mail on my Imac to automatically go to Icloud? My sent emails go there automatically but not my incoming emails. I'm using OS X 10.8.5.
No, I'm not using the icloud email address. I am using my email address [email protected] Let me try to explain what I'm trying to do. I'd like the emails that I send from and that are sent to my pacbell.net email address to also show up on icloud so if something happens to my imac which is the primary computer my emails are preserved on Icloud and I can access them there.
Is that possible?
Note: I have been able to move my pacbell.net emails to the icloud account manually. -
I am trying to import photo's on i photo. It downloads all of the pictures on my camera, how do i only select the photos i want? Is there a way to do this without selecting one photo at a time? is there a way to select multiple images? thanks!
To select consecutive images click and drag the cursor over multiple thumbnails to select all at once.
To select multiple images that are randomly located hold down the Command(⌘) key and click on those images you want to select.
Or to select consecutive images from a list of images that are together hold down the Shift key and and click on the first photo you want to select and the on the last photo you want in the list.
OT -
I can't get download skype or intagram in my iphone 5, how can i do it?? The message tha appear is: your Apple ID has not been used in the itunes store....
Read the rest of the message.
-
How do I
"import" and
"sync" my
"google" and
"safari"
"bookmarks"
to my new "iPad"
from my "macbook"?
Is There A Way I Can Use a "Stylus" With My New "iPad"
I've Got "Mobility" "Disabilities"?
<E-mail Edited by Host>You can use iCloud to sync your Safari bookmarks between your Mac and your iPad.
Instructions here > Apple - iCloud - Learn how to set up iCloud on all your devices.
Personally, I like the Wacom stylus for iPad > Amazon.com: Wacom Tech Corp. Bamboo Stylus for iPad/Tablets: Computers & Accessories
And try the accessibility features on your Mac. Open System Preferences > Accessibilty
Apple - Accessibility - OS X
I just noticeed on your other thread you mentioned that you've had your Mac for seven years so iCloud for syncing bookmarks may not be an option for you unless your Mac at the minimum is running v10.7.5 with at Safari 5.1.1. See, "Bookmarks" > System requirements for iCloud -
How do I get digital copies from my computer to show up on my AppleTV without having my computer on? Is there a way to get them to appear under purchased?
Actually, if you mean Apple/iTunes purchased content, you can go to the content area and go to Purchased... e.g. if you go to Movies > Purchased all the movies you have purchased through iTunes/Apple will appear there... ditto for Music, TV Shows, Music...
for local copies of media, computer needs to be on with iTunes running... -
I loaded "google search" on my ipad 2 frm the app store 2nite & can not find the icon....if there is not an icon - how can i delete it from my ipad? Thx
You want your user library
Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
In finder click on Go then hold down the Option key and then click on Library -
Could some please explain to me how to download my photos taken by the Galaxy S4 into the Mac? The photos are stored in the phone's memory and not in a SIM card.
This might help
http://www.android.com/filetransfer/
But search the forum, this question turns up every now and then and other apps are suggested. -
Several days ago firefox wanted to upgrade and I refused because trend micro was not supported. Today it automatically made the change. I have trend micro and your message said it would not work. I would think that an antivirus program would be one of the most important features to be able to work. Either fix it or tell me how to roll back to the other version. If you cannot I am dumping firefox and going back to internet explorer. So for now I am closing this window and using IE untill I hear from you
I've had almost every issue you've had. Finally on Friday the screen blacked out. It was obviously still charged, since I could hear the message ring, but when I tried to light up the display it didn't light so I was unable to get to it unless I removed the battery. Then, as soon as the display timed out, I couldn't get it lit up again without removing battery. I had the same slow movements throughout the display as well as slow text messaging. Every issue you had other than the alarm clock (that always worked well).
I took it in yesterday and, after over an hour spent there with a 'professional', I still had no answers. He told me to come home and copy everything from my sd card to my computer, then re-format my card. Well, my phone didn't even recognize that I had an sd card installed!! Nor did my computer!
So then I got to experimenting...I removed the card and viola!!!!!! The phone worked GREAT! It's never worked so fast! I then installed my husbands sd card to see if it was my phone's card reader or my card. Turns out that the phone still worked great with his card installed and it did recognize his card in my phone. So, my conclusion is that I need a new card. I couldn't believe the difference in speed of everything! It's like a brand new phone!
As for the hard reset...I did that over the weekend, before I could get to a verizon store. It didn't work at all.
I'd say, do the same thing I did and see if that works. Can't hurt!!! Please keep me posted. I'd like to see what you find out
Good Luck!!!! -
I had pressed a button on my keyboard which made my text and pictures and the whole page smaller in size, can I change that? And how could I change my browser out of "Full Screen" mode?
You can press F10 to toggle (View) Full Screen mode.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages -
How to i set up my outbox (for Send Later messages) so that I control when the messages are sent?
When i compose a message but do not want to send it right away, i click on Send Later and it goes into my Outbox. It remained there until i signed on to my email the next time. Then a message would come up asking me whether i wanted to send unsent messages. This gave me control over when the messages went out.
Something has changed (computer gremlins at it again) and now the messages go automatically the next time i log on.
I want my outbox set up as it was before, where i am asked whether i want the messages to go, so that i have that control.
I have tried to figure out how to do this using this help resource, and going via Tools, Account Settings etc., but haven't been able to find anything indicating how to set my outbox back to asking my permission to send unsent messages.
Hope someone can help.
Thank you.check these settings:
Tools > Options > Advanced > Network & Disc Space
click on 'Offline' button
When starting up:
Select: 'always startup online'
Send unsent messages when going online
select: 'Ask me'
Download messages for offline use when going offline?
suggest 'Ask me'
click on 'OK' to save offline settings
click on 'OK' to save changes to Options.
Create an email addressed to yourself and use the Send Later option to put it in the Outbox.
Close and reopen Thunderbird.
You should get the prompt asking to send email.
If you choose yes then the email in the Outbox will be sent. -
How can I transfer a game and game files (Minecraft) from my iphone to my grandson's new ipod touch. Do I have to restore the ipod from my iphone or can I just transfer this one game (plus files).
Back your device via icloud and restore on other ipod via icloud.
-
How do I change the way the title/author appear and is there any way to remove pages on EPUBs?
Hi all--
I am having a really hard time--I am trying to transfer EPUBs from my Win 7 comp to my Nook Tablet. I bought a lot of books from several non-BN sites because they were lots cheaper and were also sold in bundles--but the site was messed up and sent the books in PDF form rather than EPUB. PDF files won't read like a regular book on my Nook Tablet, so my friend offered to convert them to EPUB for me.
Most of the books turned out fine, but some of them now have a few extra pages at the beginning before the cover image and the correct title and author are not displaying--it seems to instead show the filepath where the file was saved on m friend's computer (C:\My Computer/Documents and Settings...etc.)
So, what I would like to do is be able to edit the EPUB files so I can delete the extra pages at the beginning so the correct cover image will be displayed and to be able to change the file's data sp it will show (and be searchable by) the correct title and author.
I am new to all this, so I appreciate any help you can offer. Thank you SO much for your help!!
--Jamie
P.S. Having the title and author show up correctly so they are searchable and appear in the correct place on my Nook Tablet is the top priority--correct cover pages would be nice aesthitically, but it is not that important.
****ALSO--does anyone know of an app or anything for the Nook Tablet that would allow PDF files to be read just like an EPUB/B&N=purchased book? Currently when I open a PDF, it shows the page in TINY print--you can use pinching to zoom in, but then the file enlarges so it is bigger than the screen, making it very hard to read. I can't figure out any way to enlarge the text but still fits the page like an EPUB does, so I'm wondering if there's an app that would do that--it's hard because you can't try apps before you buy them and I can't teel if they will work from the descriptions.For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.
Maybe you are looking for
-
Campus Manager Data Collection always Idle
Hello, Every time I start Campus Manager Data Collection, I get a window "Notified server to run Campus Data Collection" but status always stay Idle (not running). LMS 3.2 Campus Manager 5.2.1 Thanks
-
How to I select artwork on a page to transfer to another image?
I have created a comic character on an image and it has a white background. However when I scanned it the background is not evenly white so when I try to select the background and inverse selection it does not do a clean trace of my character. Is the
-
I have only a black screen in the viewer
I have only a black screen in the viewer.
-
How to display source code of a webpage in Safari 7.0?
Hello. I'm unable to find how we used to once enable developing tools in Safari Preferences or simply CMD + ALT + A to display the source code of a webpage. Now I've no clue how to display source code of a webpage in Safari 7.0 on Mac OS X Mavericks.
-
Adding Secondary Site SCCM2012
I have a Primary Site Setup with general roles and Distribution Point roles, Reporting services, Software Update point. Now we have added an another site and need to set up one more site server at site-2. I need to distribute the software updates of