How do I activate captivate 8 for a user using a license purchased by the organisation he works for?

Hi,
The organization I work for recently purchased a license for Captivate for one of its users.  I have the license certificate, and the user has the trial software installed on his home machine. which is where it will be used   How do we activate the software on his machine?

Hi There,
You can activate Captivate 8 by launching it and clicking on License This Software and enter serial key to activate the product.
If it is an annual subscription then it can only be activated by sign in with adobe id and password under which the license has been purchased ( No serial key is required. )
If you face any issue in activation then please reach out our support by calling 800-833 6687 follow IVR options 2 > 4 > 2 or can also chat with an expert by click on the following link :-Contact Customer Care
Note:- Please do not post serial key here on Forums.
Regards,
Ajit

Similar Messages

  • Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

    Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
    charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
    Regards, Bill
    * update
    I've tried modifying this key and the path:
    “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
    http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
    Also tried using symlinks as detailed here:
    http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

    Here's some links I've used to try to figure this out:
    http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
    http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
    http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
    Regards, Bill
    The registry method does not work with 8.1.  I found this out the hard way.  Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

  • Apple deleted my account when I made a complaint about being charged for apps that I did not purchase! The said it was for security reasons as my account must have been compromised but only Apple have mu information.I am convinced the operator delete

    Apple deleted my account when I made a complaint about being charged for apps that I did not order. They said that my account had been compromised and it was in my best interests to delete it for security reasons! I am convinced the operator deleted my account out of sheer malice because I complained - can anyone advise?

    No. It would have been done for security reasons. You notified them that money was being unknowingly taken from your account, so they froze it.
    Change your Apple ID here
    And also check for unusual activity on your credit card with your bank. Change all your security password while you are at it.
    Pete

  • How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

    How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

    i'm not quiet sure atm but should normally work like this:
    connect to itunes store -> log out with ur account (upper right corner where ur apple id is displayed) -> sign in with ur wifes apple id -> activate computer (store->activate this computer)
    normally it should work this way but ur wife wont be able to use apps or music within itunes library purchased with the other apple id

  • Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications?

    Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications and music?

    Read here:
    http://support.apple.com/kb/ht5621
    Changing your Apple ID to your current, working email address will not create another Apple ID, it will only change it to your working email address.

  • I recently purchased, from the APP store, Lion for use on my MacBook Pro.  I wish to upgrade my IMac to Lion also.  Do I need to make a 2nd purchase or will the single purchase suffice?  If the single purchase will suffice, how do I facilitate ?

    I recently purchased, from the APP store, Lion for use on my MacBook Pro.  To upgrade my IMac to Lion, need I make an additional purchase?  If not, how do I facilitate the IMac upgrade?

    No, you do not need to re purchase Lion. You can re download Lion on all your authorized Macs using the same Apple ID.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.

  • Is it possible to reset password for any user using abap program

    Hi friends,
    Is it possible to reset password for any user using abap program by specifying client number and user id. in selection screen.
    if any code for that to reset password please mail me.
    Thanks & Regards,
    Yogesh

    Hello Yogesh,
    Yes you can reset the password for any body using ABAP Code. But for that you really don't need any client number.
    If this process is on regular basis, then recommended is to use BAPI for changing the user details Otherwise BDC also works fine.
    => Function Module - BAPI_USER_CHANGE
    Call this in the program for resetting the password.
    => CALL TRANSACTION 'SU01' USING InternalTable
    This will be executed in the BDC of SU01 transaction recording. Use the Password Change button in the application toolbar of transaction while recording.
    Hope this helps.
    PS If the answer solves your query, plz close the thread by marking it solved and rewarding each reply.
    Regards

  • Okay so my iphone says its connected to the internet but the internet only works for games so i cant use things like facebook twitter or youtube PLZ TELL ME HOW TO FIX THISf

    Okay so my iphone says its connected to the internet but the internet only works for games so i cant use things like facebook twitter or youtube PLZ TELL ME HOW TO FIX THISf by the way it an iphone 4s and i have never encountered this problem before my dads iphone is the same after we updated to ios 8.1.1 but my mum hasnt updated yet and hers is fine

    If deleting then reinstalling the apps doesn't work, then contact the app developer for support.
    It sounds, though, like your internet connection is simply very slow.
    Try making a backup, then restoring the iPhone as new, and testing again.

  • For MacBookPro users - HELP!!! Suddenly the sound froze. The icon on the top right hand bar doesn't move and there is no sound in my computer. It happened after I shut down my computer (which I do rarely) rather than put it to sleep. If anyone has a solut

    For MacBookPro users, Leopard, please help. Suddently the sound froze. The icon on the top right hand bar doesn't move and there is no sound coming from my computer. It happened after I shut down my computer, which I do rarely, rather than put it to sleep. Please help.

    Try Resetting PRAM
    PRAM stores settings for sound.

  • Setting OOF for other users using EWS

    Hello everyone,
    I try to set the OOF for other users using EWS in an Exchange 2010 SP2 environment.
    I use this code:
    ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2010_SP2);
    service.Credentials = new NetworkCredential("username", "password", "domain");
    service.TraceEnabled = true;
    service.TraceFlags = TraceFlags.All;
    service.AutodiscoverUrl("[email protected]");
    OofSettings OOFSettings = new OofSettings();
    OOFSettings.ExternalAudience = OofExternalAudience.All;
    OOFSettings.ExternalReply = "Test";
    OOFSettings.State = OofState.Enabled;
    service.SetUserOofSettings("[email protected]", OOFSettings);
    The account I use is a Service Account our Exchange Team set up. I can see all service properties, so I would assume that the connection to the ExchangeService works fine.
    However when SetUserOofSettings executes, I receive a ServiceResponseException “Connection did not succeed. Try again later”.
    What am I missing? Unfortunately, the error message does not provide any helpful informations.
    Thank you and best regards
    Julian

    >The account I use is a Service Account our Exchange Team set up. I can see all service properties, so I would assume that the connection to the ExchangeService works fine.
     What rights have they given the account, giving an Account Exchange Admin permissions won't give you any rights to access the Mailbox content. For this to work the account you using would need to be either have been granted Full Access via Add-MailboxPermission
    or been given Application Impersonation rights (if its the later you need to make sure you use impersonation in your code).
     I would suggestion you try using the EWSEditor
    http://ewseditor.codeplex.com/ to test this out eg try connecting to the users folders and then try the OOF operation via the EWSEditor option to see if this works.
     Other things to check is if this is a Brand new mailbox that has never been connected to before then the Mailbox folders won't be initialized (you can check this using Get-Mailboxstatistics) and you would get an error trying to perform any of
    the EWS operations. If it works on some users and not others the possibly your getting throttled.
    Cheers
    Glen

  • Is it possible to mass change desktop wall paper for all users using WGM?

    is it possible to mass change desktop wall paper for all users using WGM?

    yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

  • How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

    How can I make GRID view the default view? The icons for view that used to be located in the upper right top of the page near the 'search library' are gone.

    99jon wrote:
    Perhaps it’s a design feature to speed up the Organizer launch.
    I am sure it is.
    - The normal use of the Organizer is not the folder view, it's the thumbnail view with an organization based on categories and folder. That way you should forget completely where your pictures are stored. Anyway, the folder view in the Explorer is not a map of the location of the different bits of your file, it's only a logical representation. That's easy to see when you are doing a defragmentation.
    - The folder view is useful even for those using normally the thumbnail view, but that is only for rare cases when you must change the folder organization, for instance moving files to another drive. The folder view is here to prevent you from changing things from the explorer and outside of the Organizer.
    - The new folder list view, which you find 'funny' is there to help better organizing using tags. Its huge advantage is that such a view is created extremely quickly by extracting the last subfolder in the media table : it's the way the database sees the folders, based on its own content,  totally ignoring the complex folder organization of your disk with media files or any unrelated other kind of data. You should use it in many cases, the main purpose being assigning tags when you have assigned descriptive folder names. I had suggested such a solution to prevent the long standing bugs in the folder view of previous versions.
    So yes, the purpose is:
    - to speed up switching modes
    - to help folder organization fans to migrate to tags organization
    - to hopefully get rid of the old folder organization bugs

  • The itunes store works for everything except apps, how do I fix this??

    the itunes store works for books, music etc but NOT apps - how do I fix this?  I downloaded the latest version and that did not help.

    You have posted in the mac Apps Store forum, which is entirelt different than the itunes store adn teh apps store from within the itunes store.
    Are you looking for apps for your computer ( he Mac app store) or apps for your ipod/iphone/ipad ( itunes app store)?

  • I want to get desktop path for client user using webutil

    oracle database 11g
    oracle forms 10 g
    client windows
    i want to get desktop path for client user using webutil
    as i want to save file in this path

    To get the user's path to their Desktop is a two step process.  First, you have to echo the %USERPROFILE% to a output file and secondly, read the directory from the output file in to Forms.  The code would look similar to the following:
    /* When-Button-Pressed trigger */
    DECLARE
      v_temp_path VARCHAR2(250);
      v_temp_file VARCHAR2(12) := 'webutil.log';
      f_file Client_Text_IO.File_Type;
    BEGIN
      Client_Host('cmd /c echo %USERPROFILE%\Desktop > c:\'||v_temp_file);
      f_file := Client_Text_Io.FOpen('c:\'||v_temp_file, 'R');
    Client_Text_Io.Get_Line(f_file,v_temp_path);
    Client_Text_Io.FClose(f_file);
       b_dummy := WebUtil_File.Delete_File('C:\'||v_temp_file);
      --At this point, you have the path stored in the v_temp_path variable.
      --You can assign this variable to a block item or reference it directly in your code.
    END;
    When you reference the value of the v_temp_path, don't forget to wrap the value in double-quotes (" ") becuase the path will have spaces.  Since your plan is to write a file to the user's desktop, your call to FOPEN will look  like this:
    f_file := Client_Text_Io.FOpen('"'||v_temp_file||'"','W');
    Hope this helps,
    Craig...

  • How the transactional replication work for simple recovery database (looking for some internal concept)

    How the transactional replication work for simple recovery database (looking for some internal concept)
    Rahul

    There seems to be a new myth going around recently. I’ve had at least three people tell me, in the last month, that SQL’s transactional replication requires the database to be in full recovery.
    This is complete fabrication. Replication (SQL native replication, that is) can work with the databases in any of the recovery models.
    Transactional replication does involve the transaction log, as that’s where it picks up changes from. The log reader scans over the transaction log looking for log records marked for replication, copies those to the distribution database and then marks them
    as replicated. When the checkpoint (for simple recovery) or log backup (for full or bulk logged) occur, the log will only be truncated up to the oldest inactive, replicated transaction.
    Because transactional replication has its own way of ensuring log records aren’t discarded before been picked up by the log reader, there’s no requirement for a specific recovery model.
    Refer this link
    http://sqlinthewild.co.za/index.php/2008/12/05/a-new-sql-myth/
    --Prashanth

Maybe you are looking for