How do i activate for my iphone 4?

Dear , I have a iphone 4 (white -32Gb -global) with serial number is 87117E6TE00 . I don't know why my phone was no service While i make a call .after that I turn off phone  - turn on power again , but my phone asked connect itunes . And the itunes ask need to restore fw for my phone when i connected from phone to the itunes . And then I been restored my phone but i can not activate my phone , i try to restored my phone many time but it didn't . Please help me activate for my phone and let me know how about my phone status if apple support possible because i gave my phone to phone store , they said that maybe able to server apple error while i restored for my phone ( error 1600 , -1 , and run out about 80% when restore phone ) . And why the itunes asked restore fw for iphone while i can not to do a back up file on computer by the itunes before restore it . Please contact me at email : [email protected] .sorry my English not well .  Many thanks . 

My phone is sim free version and i may able to update any new version from apple ( i updated ios 6.0 by OTA phone and i did not jaibroken phone yet ), i used phone very good about 1month for ios 6.0 , but i don't understand why my phone say that " no service " when a call to my friend on this tuesday morning .And then Itunes asked restore phone and I can not deactivate phone to use it again ( I am running ios custom fw 5.0.1 version now) . Please explain me how about " bricked " . So what's happen for my phone ? Is that problem from hardware of phone or ios custom fw solfware or server apple error when restored phone? How can I do with my phone to fix it now ? Please help me to repair phone ( my phone expried date of warranty 1 year at Apple , Apple will not service it too ). Thanks.

Similar Messages

  • How do I activate a used iPhone 3 with no SIM card for use as an ipod touch?

    How do I activate a used iPhone 3G with no SIM card for use like an iPod Touch? It was apparently on AT&T previously and I have another iPhone 3 that is active on AT&T if that is helpful. Thanks!

    Copied from the link provided.
    Follow these steps to use your iPhone without a wireless service plan:
    Insert the SIM card from your new, activated iPhone or one that was previously used to activate the original iPhone.
    Connect the iPhone to iTunes on a computer connected to the Internet.
    Once iTunes activates the device, you're free to use the iPhone as if it were an iPod touch.

  • How do I activate factory unlocked iphone 5 for  first time

    How do I activate factory unlocked iphone 5 for  first time?Should i connect to itunes?Or should I put the sim first and then ON the device?Pls help me

    Yes.
    Insert the SIM card and power the iPhone on to find out. Nothing bad can happen if you can't and if you can't for some reason, connect the iPhone to iTunes.

  • How do I activate back my IPhone 4s after getting a new micro sim

    How do I activate back my Iphone 4s after placing a new micro sim in it

    Hey ayokafromkingston,
    Thanks for the question. After reviewing your post, it sounds like you need help activating the iPhone. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Get help activating your iPhone
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • HT201407 how can I activate Imessage on Iphone 4 in Iran?

    how can I activate Imessage on Iphone 4 in Iran?

    You cannot.
    As announced by Apple from the beginning and as stated on their website, SIRI is only on the iphone 4s and the iphone 5

  • HOW WILL I DO FOR MY IPHONE GOES ON WHAT HAPPENS YOU HAVE A SHOP BUT BUT IS BLOCKED IN ICLOUD

    HOW WILL I DO FOR MY IPHONE GOES ON WHAT HAPPENS YOU HAVE A SHOP BUT BUT IS BLOCKED IN ICLOUD

    This explains the iPhone Activation Lock:
    http://support.apple.com/kb/HT5818

  • HT1688 HOW DO I ACTIVATE A REPLACEMENT IPHONE

    how do i activate a replacement iphone?

    there should be an sim card in the new cell all you gotta do is barrow an phone from a family member or use your house phone call the carrier and they will walk you through the steps

  • How can you activate find my iphone if you dont have the device you need to find

    I wasnt aware that i had to activate find my iphone and Apple themselves are being useless in helping. Is there anyway i can activate it without having the device as i have obviously lost it. or is there anyway of displaying a message even though it isnt registerted?

    No and no.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • HT201303 how to use itune for my iphone?

    how to use itune ?

    Hi Rashid,
    To use itunes for Ur iPhone click http://www.apple.com/itunes/how-to/#video-sync
    Setting up syncing
    Tutorial:
    Before setting up syncing you should download and install the latest version of iTunes. Wi-Fi syncing requires iTunes 10.5 or later and iOS 5 or later. You can change your sync options at any time. Each time you sync, content is synced between your iOS device and computer to reflect new, updated, or deleted content.
    USB syncing
    Open iTunes.
    Connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side:
    Some tabs may not appear if you do not have corresponding content in your library. For example, if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
    Click Apply, in the lower-right corner of the screen, to sync.
    Wi-Fi syncing
    Open iTunes
    To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
    In the Summary tab, select "Sync with this [device] over Wi-Fi".
    Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
    The iOS device is plugged in to power
    iTunes is open on the computer
    The iOS device and the computer are on the same Wi-Fi network
    While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
    Click Apply or Sync to sync the iOS device.
    If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
    What you can sync
    Applications
    Audio content—music, podcasts, audiobooks, and iTunes U content
    Bookmarks
    Books
    Contacts
    Calendars
    Movies and TV shows
    Photos
    Notes
    Documents (File Sharing apps only)
    Ringtones
    Additional Information
    The first time you sync the Info tab with your iOS device, you are asked if you want to merge data, replace data on the service, or replace the data on your computer from the following applications:
    Mac: Address Book, iCal, Microsoft Entourage, or Microsoft Outlook 2011
    PC: Microsoft Outlook, Outlook Express, Windows Addressbook (XP) and Windows Contacts (Vista and Windows 7)
    For more information about syncing your device with your computer, see the user's guide or see this article.

  • HT1349 How to open unlock for my iphone

    How to open unlock for my iphone

    Are you talking about the slider to unlock your phone or you have forgotten your password to unlock it?
    Or are you referring to unlocking your iPhone from a carrier?

  • How can i activate find my iphone

    Hi, good morning now i facing a problem about how to activate ( find my iphone ) apps ?

    To activate Find my iPhone, the device has to turned on AND in your possession. You can't do it after the device has already been stolen or turned off.
    That would be like locking your front door after theives have already entered your home.

  • HT4623 how to download whatsapp for my iphone 4s

    how to download whatsapp from Application store for my iphone 4s

    Update your iPhone.
    Plug it in, select it in iTunes and click Update.
    While it is updating,download -> WhatsApp.

  • How AT&T charges for two iPhones

    My girlfriend is thinking about getting an iPhone and I already have one. We want to be on a family plan together but I am not sure that how AT&T charges for having two iPhones on the same family plan. With regular phones it has always been just an extra $10 a month. If anyone knows the answer to this I would appreciate any help that I can get.
    Thanks!

    I have a family plan with 4 phones. 2 of them iPhones
    Since I am the main line. My phone costs $100 a month plus $20 unlimited data plus $20 unlimited SMS so all together just my phone is $140 a month.
    My dad has an iPhone his is $9.99 a month plus the $20 unlimited data. So grand total for his line is $29.99 a month
    So the only increase you will see on the Bill is $40 plus taxes as you both will have Unlimited data.

  • HT201269 How do I activate my new Iphone 5s from Apple if I am on verizon wireless.

    How do I activate my Verizon service on my new Iphone 5s I purchased from Apple?

    Call Verizon.

  • HT204380 How can I activate FaceTime in iPhone 4 , there no option in setting menu

    Hi
    I have iPhone 4 ,FaceTime is not available in my iPhone ,
    I saw the Setting menu there is no option ,how can I activate ,
    Is there available or not

    If the iphone was purchased in the Middle East, then it cannot be there as several Middle Eastern countries Governments do not allow it.
    Where did you buy the iphone?

Maybe you are looking for

  • Automatic creation of employee to business partner

    Hello geniuses, We have scheduled a job that executes program BBP_VENDOR_SYNC. This brings new and updated partners from ECC 5.0 to our SRM 4.0. After that, we have to manually create employee with contact person to each new partner, so that they can

  • How to include mxml in a panel

    hi, I have a set of mx:Panels The content to be displayed inside each panel is structured in an mxml file. How do i reference or place this mxml file inside the panels. Thanks, Lucky

  • Package: Difference between calling external procedures vs. internal

    I have a package which has a bunch of procedures. I have decided to move one of the procedures outside the package because there is a user that needs control over the SQL in it. I pass 2 dates into it so I don't think I can create a view. My question

  • Weblogic 10.3 Not Removing Expired Messages from JMS Queues

    Dear All, We have an application that is running on Weblogic 10.3. This application (let us call this application Y) receives messages on a JMS queue. These messages are placed on the queue by another application (let us call this application X). We

  • Existing document opens blank in CS5

    I have existing documents created in CS5 that when opened now, open as 'blank' pages. They export fine and look the way they should. I see all of the elements in the links & layers palettes. I can see the frames of the various elements on the 'blank'