How do I activate my iPad2 and signup for 3g?

I bought a refurbished iPad2 wifi+3g (Verizon) from Apple instead of through Verizon because I got it at a discounted price.  I would like to activate 3g service and pay for one month.  How do I go about doing this?  I didn't see any instructions included with the iPad on how to setup a data plan.  Thank you. 

Holy crap I finally figured it out!  Apparently I was calling the wrong number, and had to ask specifically what I needed.  If you purchase your iPad from Apple (new or refurb), you need to call 800-256-4646 and press 1.  Tell then you are interested in activating your iPad mobile broadband and you want to 1gig $20 pre-paid plan.  They will transfer you to the right department.  When you get on the phone with the CSR, ask for a tech.  If they wonder why tell them you have an iPad 2 Verizon model you bought from Apple and need to activate it on their network so you need to submit your MEID.  When you get to the tech, tell them what your MEID is (setting, general, about), and they will check to see if it is in their system.  If it is not, the tech will need to submit it, and the process take about 72 hours.

Similar Messages

  • How do I activate acrobat 8 and adobe software on windows XP while not connected to internet? [was: Windows XP.]

    Please help me.
    How do I activate acrobat 8 and adobe software on windows XP? While windows XP can not connect to internet.

    Hi Tom,
    We would like to inform you that Acrobat 8 is now end of life, we have limited recourses for it.
    Kindly check the System requirements | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC
    Please check the following links if any of them works for you.
    Acrobat 8 activation problem
    Adobe - Adobe software activation: Phone activation
    Offline Activation
    Thanks,
    Atul Saini

  • I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia

    I am going overseas to Singapore how can I use my ipad2 and my iPhone without it costing me a fortune. I am in Australia

    iPhone - Locating wireless carriers
    The above will provide carriers in Singapore that you can use. You would get the SIM card from the carrier. Of course if you are somewhere that has WiFi service then you won't need the cellular connection.

  • How do I activate factory unlocked iphone 5 for  first time

    How do I activate factory unlocked iphone 5 for  first time?Should i connect to itunes?Or should I put the sim first and then ON the device?Pls help me

    Yes.
    Insert the SIM card and power the iPhone on to find out. Nothing bad can happen if you can't and if you can't for some reason, connect the iPhone to iTunes.

  • TS1702 How do I activate a downloaded purchased ringtone for my phone?

    How do I activate a downloaded purchased ringtone for my phone?

    Go to Settings>iCloud and sign out. Any synced data, such as calendars and contacts, will be removed.
    To get a new ID: go to http://appleid.apple.com and create a new ID - you will need a different non-Apple email address from any ID you already have.
    Then go back to Settings>iCloud and sign in there, enabling any data types you want to sync in the list there. You will be asked to create a new @icloud.com address when enabling Mail.

  • How do I activate homesharing on my IPad for Apple tv

    How do I activate homesharing on my IPad for Apple TV. I do not have the Advance menu selection to activate from ITunes

    Native mirroring requires a recent Mac (2011 or later) running Mountain Lion (10.8)
    http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US

  • How Can I get Interview Questions and answers for Oracle9i DBA and PL/SQL

    How Can I get Interview Questions and answers for Oracle9i DBA and PL/SQL Programmer.

    Please check the following link.
    http://www.geekinterview.com/
    -aijaz

  • How to get purchase organization,  PAYMENT_TERMS and INCO_TERMS for vendor?

    Dear friends,
    How to get purchase organization,  PAYMENT_TERMS and INCO_TERMS for a vendor(LIFNR)? I couldn't fine these data in LFA1 table.
    Thanks a lot!

    Hi,
    You can find ZTERM(Terms of Payment) in LFB1 table for a particular vendor (LIFNR) and company code.
    and Incoterms INCO1 in LFM1 table for a particular vendor (LIFNR) and purchase organisation.
    Hope this answers your query.
    Regards,
    Brajvir

  • How to pause while document printing and wait for user actions.

    How to pause while document printing and wait for user actions. (for sample: pressed button). Pause after each printed pages.

    Print page by page after considering the user actions!

  • How to set a minimum width and height for a stage or scene?

    Hello,
    Does anyone how to set a minimum width and height for a stage or scene?
    I tried listening for width/height property value changes and then adjust the width/height if necessary, but that causes unpleasant flickering of the window.
    In JavaFX 2.1 beta SDK for Mac OS, the Stage class has setMinWidth() and setMinHeight() functions which work very well.
    I'm wondering what's the equivalent way to do that when using the FX SDK for Windows.
    Any help is appreciated!
    Thanks.

    I was wondering how to enforce a minimum stage size with JavaFX 2.0.3.The same flickering way you are currently doing it. See: http://javafx-jira.kenai.com/browse/RT-15200 "Need a way to set the minimum size of a window"

  • How to use same Data Type and Length for two fields

    How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
    SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
    FROM bsik
    INTO TABLE it_bsik
    WHERE bukrs = p_bukrs
    AND lifnr IN s_lifnr.
    IF it_bsik IS NOT INITIAL.
    SELECT belnr gjahr awkey awtyp
    FROM bkpf
    INTO TABLE it_bkpf
    FOR ALL ENTRIES IN it_bsik
    WHERE belnr = it_bsik-belnr
    AND gjahr = it_bsik-gjahr.
    IF it_bkpf IS NOT INITIAL.
    SELECT belnr gjahr lifnr xblnr
    FROM rbkp
    INTO TABLE it_rbkp
    FOR ALL ENTRIES IN it_bkpf
    WHERE belnr = it_bkpf-awkey+0(10)
    AND gjahr = it_bkpf-awkey+10(4).
    ENDIF.
    ENDIF.
    Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
    Kindly clarify.

    Hi Saurabh,
    Please see the example code that I have developed for you. It will help you solve the problem.
    REPORT ZTEST_3 .
    tables : BKPF.
    data : begin of it_bkpf occurs 1,
             belnr type RE_BELNR,
             awkey type awkey,
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf.
    data : begin of it_bkpf1 occurs 1,
             belnr type RE_BELNR,
             awkey type gjahr,              " change the data type
             awtyp type awtyp,
             gjahr type GJAHR,
           end of it_bkpf1.
    data : begin of it_rbkp occurs 1,
             belnr type BELNR_D,
             gjahr type gjahr,
             lifnr type LIFRE,
             xblnr type XBLNR,
           end of it_rbkp.
    select belnr
           awkey
           awtyp
           gjahr
           from bkpf
           into table it_bkpf
           where BUKRS = 'TELH'.
    loop at it_bkpf.
    it_bkpf1-belnr = it_bkpf-belnr.
    it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
    it_bkpf1-awtyp = it_bkpf-awtyp.
    it_bkpf1-gjahr = it_bkpf-gjahr.
    append it_bkpf1.
    clear it_bkpf1.
    endloop.
    select  belnr
            gjahr
            lifnr
            xblnr
            from RBKP
            into table it_rbkp
            for all entries in it_bkpf1
            where belnr = it_bkpf1-belnr
    This is just an example. Change the fields according to your requirement.
    Regards
    Abhii
    Edited by: Abhii on Mar 9, 2011 9:08 AM

  • How to dynamically adjust Frequency, Phase and Amplitude for a Generated Sine Wave in C/C++?

    Hi,
    I wonder if anybody know how to dynamically adjust Frequency, Phase and Amplitude for a Generated Sine Wave in C/C++? This is a part of my project: I need to dynamically generate a sine wave voltage signal by some calculation using the data from a simultaneous analog input and another signal.
    Your help will be appreciated so much!
    Marlon

    Hello Marlon,
    Here is an example of changing frequency and ampliude for an E-series device in Labwindows/CVI. The programming should be similar in C for your S-Series device. As is says on the linked webpage above, this process is going to be very processor intensive since you will continually be creating a buffer.
    Nicholas C
    National Instruments
    Applications Engineering

  • Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

    Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

    stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
    A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

  • How are the .7z files used and installed for photoshop elements and premier elements?

    How are the .7z files used and installed for photoshop elements and premier elements?

    Hi,
    You can try to extract them to a folder and then try to install using the setup file.
    Or you can try to download the .exe file ( Small File ) for the software you have and then run the .exe file and it will start the installation. Both .exe and .7z file for the application should be in same location.
    Download Photoshop Elements products | 9, 8, 7
    Download Photoshop Elements products | 11, 10
    Download Premiere Elements products | 11, 10
    Download Premiere Elements products | 9
    *** You can either download the .exe file from the above download links or you can also download both .exe (File 2 of 2) and .7z (File 1 of 2) from the above links.

  • HT1904 How do I accept the terms and conditions for iTunes if there is no agree button?

    How do I accept the terms and conditions for iTunes if there is no agree button?  There s nothing at the end of the email. I've tried downloading an app and accepting there but it does the same thing.

    iOS 7.0.3 is now available ,that may have a fix

Maybe you are looking for

  • How can I upgrade from iMovie 7.4.1 while running Mac OSX 10.7.5?

    I am trying to upgrade iMovie 7.4.1, but I don't know where to get the next version of the software.  I am currently running OSX 10.7.5 on a 2008 iMac. Thanks.

  • DJ 3050A J611 is not discovered

    I'm using a laptop with Windows 7 professional SP 1. I connect the printer DJ 3050A J611 with USB and the printer is seen in "Devices and printers". I installed the complete software from HP. But the printer is not discovered by the software. When I

  • Ethernet port sometimes fails

    I have a new router from O2, my new ISP, and while I can connect my Powerbook (15" G4) wirelessly, I cannot connect through the ethernet port. Network Diagnostics says that the ethernet cable is not connected to the Powerbook, which is incorrect as i

  • Schedule Snapshots Rotation

    Hello, I have two Hyper-V servers running Replica feature, it is working great, but it only protects me from hardware failure. Now I want to have snapshots enabled for quick rollbacks (and full backups for more restoring options, but that's for later

  • AIA Installation & JDeveloper

    I have installed AIA Communications 2.0. I want to setup the whole AIA installation in JDeveloper so that I can change the BPEL processes and deploy it. Can anyone put some light on the procedure of setting up the JDeveloper with AIA artifacts?