How do I activate NFC in order to pair with a speaker ?

How do I activate NFC in order to pair with a speaker ?
The speaker is a Beats Pill (supports NFC).
Thanks
Alon

Yochelman wrote:
How do I activate NFC in order to pair with a speaker ?
The speaker is a Beats Pill (supports NFC).
You don't connect the iPhone to the Pill using NFC.
You connect 2 Pills using NFC.
-> http://www.beatsbydre.com/support/how-to/pill/pill-functions.html

Similar Messages

How do I activate the microphone button in imessage with the iphone 5 without using Siri?

How do I activate the microphone button in imessage with the iphone 5 without using Siri?

You don't. You have to activate Siri.

How can i activate Bluetooth on my Ipad Air with iOS 8.2 ?

Hello!
My first problem is my bad English.... :-(
My second problem is with Bluetooth on my Ipad.
I can't activate the Bluetooth function on my Ipad Air with iOS 8.2.
At Settings>Bluetooth there isn't a activate or YES/NO button.
It allways shows a wait symbol (little turning circle)
Do you have you any tipps for me?
Best regards
Hostie64

You can try the standard troubleshooting steps in this order:
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Restore: Connect your device to iTunes on your computer, backup, and then select Restore to Factory.
See here For more details on restore: https://support.apple.com/en-us/HT201252
If none of these work your device may have developed a hardware problem. Contact Apple Support: http://www.apple.com/contact/

How to release a collective production order in CO05N with MSPT?

The issue was: I want to release a collective order by co05n, e.g. the structure of this collective production order 10000 like this:
10000----20000
30000---40000
---50000
if order 50000 with material shortage, keep the customizing OPJK release order=3, how to release this collective
order. If it is not possible in standard, can the parallel order 40000 be released??
Thank you, all.
Edited by: Stephen Wang on Apr 15, 2010 3:12 PM

Dear,
In Transaction CO05N, you execute a collective release. For one of the orders, the availability check determines missing part although it has been set in Customizing of the availability check (OPJK) that a release can be executed for missing part per user decision. Therefore, a dialog box is processed on which options a.) 'Release order', b.) 'Missing parts list' and c.) 'Cancel' are displayed.
If you first branch to the missing parts list and then press 'Cancel' on the dialog box there it self
Else you can do this with these options,
1)Use T Code COHVOMRELEASE here select order as you want and release accordingly.
2) Use Transaction SE38 to create the variants for program PPIO_ENTRY and schedule it through SM36 or use standard variant as SAP&RELEASE if want in background.
3) use BAPI BAPI_PRODORD_RELEASE
Please try and come back.
Regards,
R.Brahmankar

How to know if a Sales order item created with or without reference

Hi,
I am working on user exit USEREXIT_MOVE_FIELD_TO_VBAP, and I just wanted to know if there is a way to know if a sales order item is created with or without reference to a contract.
I need to write the code in USEREXIT_MOVE_FIELD_TO_VBAP, however, when an SO line item is created with reference the userexit is being called twice and when the SO line item is created without reference the user exit is being called only once.
My aim is to check if a SO line item is created with reference to a valid contract. If the item is without reference to a contract or the referenced contract is not valid, then I will have to determine the contract based on the customer contracts.
Any help on this would be greatly appreciated.
Best regards,
Siva

Hi Vindo,
The Userexit USEREXIT_MOVE_FIELD_TO_VBAP is called twice when the SO line item is created with reference to contract. The first time the user exit is called there will be no value filled in vbap-vgbel and the second time it comes to the userexit then vbap-vgbel will have a value. I think CVBAK-VBELN will contain the reference if the so line item is created with reference and the value of CVBAK-VBELN contrains blank if the item is not referenced. Anyway thanks for your reply.
Best regards,
Siva

How can I activate the back and forward gestue with an Alps Touchpad in firefox 5 an 6. In Firefox 3.6 it already runs.

I have Windows 7 64 bit
Firefox 6
in about config is the Gesture back and forward activated
I have an Acer Notebook with Alps Touchpad.
In Firefox 3.6 the Gesture funktion already runs

You can't run Firefox 3 versions on Windows 98.
Firefox 2.0.0.20 is the last release that runs on the Windows 98 and Windows ME platform.
* https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/en-US/
* http://www.mozilla.com/firefox/4.0/system-requirements/
* http://www.mozilla.com/firefox/3.6/system-requirements/
* http://www.mozilla.com/firefox/3.5/system-requirements/
* http://kb.mozillazine.org/Unsupported_operating_systems

How to fix wireless apple keyboard that ceased pairing with imac at the same time the keyboard on my ipad2 disappeared right after I updated osx vs. 10.8.5 sent out by Apple

I updated to OSX vs. 10.8.5 sent out by Apple on Oct 4,2013. My wireless
Apple keyboard is no longer paired to my imac and at the same time I noted that the keyboard on my ipad2 no longer exists. At first I thought it was an icloud issue but am wondering if anyone else has experienced this problem.

I downloaded 10.8.5 Supplementary and this time there was a picture of my keyboard with the suggestion that I power it on, which I did many times. Finally re-booted my imac and shut down BlueTooth on my ipad. I now have a keyboard back on the ipad and my wireless keyboard on the imac is working.

How do I activate debugging in FileServlet?

We're having performance problems in the FileServlet when we load test our application and I need to turn on debugging in the servlet so I can troubleshoot.
Does anyone know how we can activate the large amount of debugging that is available in the FileServlet?
Thanks!

Yochelman wrote:
How do I activate NFC in order to pair with a speaker ?
The speaker is a Beats Pill (supports NFC).
You don't connect the iPhone to the Pill using NFC.
You connect 2 Pills using NFC.
-> http://www.beatsbydre.com/support/how-to/pill/pill-functions.html

IPhone won't detect 09 VW Passat handsfree device in order to pair

I just bought an 09 VW Passat and had the dealer install Bluetooth hands free, but my iPhone will not even locate the hands free device in order to pair with it. I was able to pair my husbands blackberry with it, so I know it isn't the car. Is there something I am missing? The dealer said it should work with my iPhone.

Just got a 09 VW Golf with the same Bluetooth install. It requires Direct Sim Access, something that the iPhone does not have or has disabled.
Apple could probably enable this in software ...
/thomas

How to activate "Issue Purchase Orders" option ?

Hello everybody,
How can I activate the "Issue Purchase Orders" option ? At this moment, every time a purchaser creates a PO in Sourcing Cockpit, the PO is created and sent it immediately to the vendor.
Obviously, I want to change that.. =)
Somebody knows how can I change this behavior and activate the "issue purchase order" option?
Thank you very much for your help !
Diego

Hello Diego,
this is exactly what I already told you in my first reply.
With this customizing option, a PO "trigger" (term used in Post Processing Framework --> term used in output logic !!) is created but not processed immediatly.
You can find this "waiting" output in transaction "Issue purchase order" and execute it, or let a scheduled report do it.
When you save the PO in ECS, FM BBP_PROCDOC_SAVE will call this output creation, then level one update tasks are called (physical update of DB) by the COMMIT. Then level 2 update tasks are called. The PO transfer to the backend is one of those last calls.
So there is no link between PO output and BE transfer.
Except in case of DUMP, I don't see any reason to block the PO transfer because of PO edition.
If your PO is not transfered in BE, this is not because of the PO output.
There is another reason.
Check PO status : is it "In transfer to exec" or "transfer to exec failed" ?
Rgds
Christophe

Upon notification that a pre-ordered book was ready for download by clicking on a link, the book failed to download. The link sent me back to the store. How can I activate the download?

I pre-ordered a book. I was notified it was ready for download. When I clicked on the link to download it failed to download. Instead, it took me to the store.
How do I get my pre-ordered book without paying twice?

Hello Jonagolds
Your purchase should show up as something that you could download again. Check out the article below on how to do that across all devices and in iTunes. If that is not the case and you do not see it, then report the issue to the iTunes Store for further assistance.
Download past purchases
http://support.apple.com/kb/HT2519
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

How can I activate my Photoshop CC?

When downloading PS CC, in order to install it, i got a lot of times 'download is corrupted' warnings and had to do it again. After that a lot of 'expansion is not possible' alerts showed up.
Instaling was no problem but activation was not possible because "this ID was allready used twice on other machines'
In fact I had installed it only on this same PC, after a short time it broke down and I changed motherboard and processor, so I lost my PS CC installation.
How can I activate my PS CC or how can I get rid of the 2 activated PS CC activation that don't excist
wim beuwer

Hi wimb,
Please refer the article: http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html.
Regards,
Romit Sinha

HT1807 got an unlocked iphone 4s bt it asks for activation required via a wifi or mobile network each time i put a new sim. wat if i put in a sim which doesnt have 3g and i dnt have any wifi around me? how do i activate it then?

I am living in uk at the moment and i have an unlocked iphone 4s. Each time i put a new sim in it a message appears saying ''Activation Required''. When i slide the unlock bar it asks to choose a wifi network or a mobile data network. So far this hasnt been a problem coz i always found a wifi network around me or the mobile data network worked fine. Now the problem is I am moving back to my country Bangladesh in couple of days. And back there wifi isnt a very available thingie. And mobile data network is very hard to connect. So if i put on a Bangladeshi mobile service sim in my phone how do i activate it without the wifi or mobile data network? Please some help asap would be much appreciated.

Hi Allan,
Sorry for the rant up there.. Thanks for your quick response. I couldn't get to an Apple store and can't order anything from the States that contains Lithium ION batteries -- no U.S. Postal Services will deliver these to us anymore. Target sold this to me as an unactivated Sprint phone. I never activated it through Sprint in the States and just took it to Germany with me. I updated to vs.6.0 via ITunes and without the Sprint SIM Card installed. The IPhone is now accessible (Apps, Settings, etc., to be able to check firmware, et al., settings. However, I can't tell if it's unlocked (since I upgraded the version without the Sprint SIM Card installed) until I go to the local cell phone shop and stuff in a BASE (provider) SIM card and test it out. Is there a way to tell whether or not the phone is unlocked without a SIM card in it? I don't think there is....

I was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help.

How do I activate NFC in order to pair with a speaker ?

Similar Messages

Maybe you are looking for