How do I activate the 'Display Credit Balance with Negative sign'

Dear All,
How do I activate the 'Display Credit Balance with Negative sign' that is already deactivated ? I checked through Trial Balance and did not find any balance for any BP or GL Account.
Regards,
William

Hi,
Please check Note No. : [970813|https://b1-support.wdf.sap.corp/sap/support/notes/970813]. The solution is available in the Note.
Check the link in the Note for solution.
Hope you are partner. If not, you can contact your partner for further investigation.
Also, make sure that you have access to the PEQ Wiki page and also that all the instructions mentioned in the PEQ Wiki is followed.
Kind Regards,
Jitin
SAP Business One Forum Team

Similar Messages

The option 'Display Credit Balance with negative sign" was not activated.

I've encountered with a huge problem after load opening balance.
I forgot to tick the option 'Display Credit Balance with negative sign"
It makes my client's Chart of Account uncommon such as credit balance in Cash Account, AR .....
However, I've search the sap note to solve it as follow:
Description of the bug::
When creating the company in the system the option 'Display Credit Balance with negative sign' was not activated.
Once transactions were created in the system the functionality can not be changed.
Limits of the query:
After running the update query, please restart SBO first and then run the restore 'GL account and bp balances';
otherwise, the cashed value of SBO will not be updated and restore function may not take effect.
1. Meaning of restart SBO => restart SBO Service Manager right?
2. Please help me please to find "The restore G/L account and bp balances" form. Where is it?;
Thank you

Hi,
I would think that you are following the PEQ instructions for note 970813, correct?
If this is the case and you are using 2007 then you will find the restorev in the top menu; Help -> Support Desk -> Restore. You will find the functions here. Please note that this should only be used on direct instruction from support or a note like in this case. A backup should also be taken before running restore.
Regards,
Jesper

Display credit balance with negative balance

Customer forgot to put a check box on above option in company detail. Eventually all the positive(debit) entry for expenses is showing a negative sign eg -1000.00 on the balance figure in Chart of account and vice versa for credit accounts.
Anyone has idea how to resolve this issue without having to rekey in history transactions?
Regards
Thomas

Hi Thomas Lai
there is a way.....but first
SAP would say you MUST re-inport. I agree, if you don't and they find out you played in the database they will not ASSIST you and you would be infringing the agreemnet your company/customer has with SAP.
Solution 1
Now i'll give you a solution after a warning. If you go to table OADM and in the column "DispPosDeb", change the value N to a Y. Your own choice.
Solution 2
If you do it the legal way, you should export and import everything.Use "import/export transactions from SAP" in administration->data Import/Export->Data import or Data export.
Hope this helps

How do I adjust the display and sound with my Macbook Pro connected to my Sony Bravia?

I just bought the DVI - HDMI and then connected my Mac to my 46" Sony Bravia. It works obviously cause I'm typing right now, but it is so painful to try and read anything less than what appears to be 14 font or so. The display is set at 1080p obviously because that's the whole point of this, but is there a way to try and make things bigger? I don't want to sit super close to the TV and fry my eyeballs, that also defeats the purpose of this. Another question regarding sound. It seems I can only adjust the sound from my keyboard, but I would rather do it through my TV's volume control so I can make things louder. Any help would be awesome. Thanks.

mcfancher wrote:
Thanks for the reply. My dumbself forgot that right next to my new TV is my old TV, a 40" Samsung LCD. Now I put it on my desk and I have it in 1080p and everything is going good except for the fact that I can't see the top bar on my desktop and now the sound seems to be coming exclusively from my Mac instead of my TV, although I still have it hooked up with an HDMI cable. Any new thoughts?
EDIT: Ok fixed the display issue, but I'm still getting sound out of my Mac. Really confused on what to do. I don't see why I could get audio out of my Sony TV with an HDMI cable but not my Samsung. Doesn't the same principle apply? Xbox and PS3 work that way, so pretty confused unless I need to get a digital audio cable or something.
Message was edited by: mcfancher
If everything else is the same, that is strange. I have seen a post or two that reported only certain HDMI ports working with computer input, so if the Sammy has another HDMI input, give that a try.

How can i activate the I-Tunes Sync with a Win 7 pc

The activating of WLAN Sync is Not possible as described in Manual

All you can do with a Windows system from ARD is observe and control. For that, you'll need to install a VNC server on the Windows system. If you search this forum for "VNC", you should find suggestions on software that people have had success/failures with.
Regards.

How to display the number with negative sign in the front in ALV.

most important, this ALV is also can totalize.
can someone give me some suggestion?
thanks
jisuwen

i hope you want a negative sign before a char but holding some number. then that case
loop at itab.
concatenate itab-char '-' into itab-char.
modify itab.
endloop.
and you can display in ALV with negative sign...
Totalling you need to Specify
DO_SUM = 'X' while populating fieldcatalog...
If subtotals then you have to Build sort table and based on that you can proceed./.
examples are there you can find inn SLIS package..
vijay.

I have an iTunes account with a $25.00 credit but everytime I go to purchase a song, it goes to my credit card details. How do I use the iTunes credit and not the credit card?

I have an iTunes account with a $25.00 credit but everytime I go to purchase a song, it goes to my credit card details. How do I use the iTunes credit and not the credit card?

Just to confirm, you are logged into the iTunes Store using the account in which the balance exists, and the balance is showing at the top of the iTunes Store window? And you're not trying to purchase gifts for someone else?

How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

HT1918 I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password, how do i activate the songs?

I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password, how do i activate the songs

Welcome to the Apple Community.
The following article(s) may help you.
Look up your old and forgotten Apple ID

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

Hello Friends,
I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
(I'm using windows 7)
Friends, Please help me with the above problems. It will be a great help.
Thank You.
R.SAMALA

Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
http://www.apple.com/support/ipod/service/prices/
B-rock

How do I change the display order in the VPN menu in the status bar?

Hello,
How do I change the display order in the VPN menu in the status bar?
(in the drop-down menu from this icon) ->
Thanks.

Hello. Perhaps this is because you are trying to arrange the order of many VPN services, since only one VPN service can be selected at once in System Preferences. In my original post, I did not mean that; I meant that I wanted to arrange the order of VPN configurations within a VPN service. In this screenshot, I have one VPN service only:
And in the following one, it is shown that there are more than one VPN configurations within that VPN service:
Furthermore, it was the order of VPN configurations that I wanted to change, not the order of VPN services. If you are trying to change the order of VPN services, I do not have a solution.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?

How do I get Acrobat XI pro on a Mac to work fully, and not just act like Acrobat Reader. i just paid and downloaded it, entered new serial number when requested, but when I open a .pdf I have no pro features showing (such as editing tools, convert to powerpoint, etc). I use XI pro on a windows PC and have no problem there.

Perfect answer. And I feel a bit dumb (should have worked it out, but still finding my way round the Mac). Many thansk for the help.
From: Test Screen Name <[email protected]>
To: John Spencer <[email protected]>
Sent: Saturday, 1 November 2014, 20:20
Subject: I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
I installed Acrobat XI pro on a Mac but it only shows the features of acrobat reader - how do I activate the pro features?
created by Test Screen Name in Acrobat Installation & Update Issues - View the full discussionYou probably still have Adobe Reader on the system. Be sure to run Acrobat instead. Use Launch Pad. Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6889718#6889718 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How do I activate the 'Display Credit Balance with Negative sign'

Similar Messages

Maybe you are looking for