How do I add a hub or switch to Airport Extreme?

Hi gang-
I have the 802.11g Airport Extreme. It has only the one Ethernet-out LAN port, and I'd like to add more ports to expand my wired network. What is the best way to do this? Do I plug in a router or hub or just a simple switch? Any tips on how to configure this?
Thanks!
Dave

I suggest going with an 4-8 port Ethernet switch ... something like the Linksys EZXS55W or any similar model from another vendor. Just connect an Ethernet cable from the AEBS's LAN port to either the Uplink port (if the switch uses one) or any available port on the switch.

Similar Messages

How do I add more ports to my new Airport Extreme?

How do I add more ports to my new Airport Extreme? What do I need to buy?

Thinking to leave as is for now- one 2013 extreme.
That would certainly keep things a lot simpler.
Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan. I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.

How do I add a guest network to existing airport extreme configuration?

I have an existing Airport Extreme configuation in my home Wifi network and I want to add a guest access point. When I open the recently updated airport utilities, the screen no longer looks the way it used to, with the side bar on the left and my devices listed there for me to select (I also have an Airport Express). I used to be able to select the Airport Extreme from the left side bar, then hit continue to change any settings. Well now, since it updated, the screen looks different, with internet at the top, pointing to the Airport Extreme, then the Airport Express. When I select the Airport Extreme, it no longer gives me the option to change the settings for it, which is where my problem lies! Any help? I know it's probably something very simple that I am missing, but I'm at a loss.

Why would I download a lower version of AirPort Utility?
To gain more functionality.....since AirPort Utility 6.0 is otherwise known as "AirPort Utility Lite" on the forums. It's a "first try" for Apple with a new look. While it does look nice, it has been downgraded as far as the features are concerned.
For example, if you open AirPort Utility 5.6 and click on the AirPort Extreme on the left, your Generation version will be displayed on the right side of the page. There are many more advanced settings available in AirPort Utility 5.6 as well...that are not available on 6.0.
But, you don't have to install AirPort Utility 5.6 if you don't want to. I suggested it because it offers more features and will also look exactly the same as the AirPort Utility that you have used previously.
If your AirPort Extreme is in Bridge Mode, this indicates that you have another device...probably a modem/router....which is acting as the main router on your network. Bridge Mode is the correct setting for the AirPort Extreme in this case.
If you can post back with the make and model number of your "modem", we can check to confirm.
Unfortunately, the Guest Network cannot be enabled unless you configure the AirPort Extreme to be the "main" router on your network, which is likely not possible. If you try to configure the AirPort Exteme otherwise, you will receive error messages and the network will not function correctly.

How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
Sigve

Hi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve

Add IP address ranges to my airport extreme firewall white list.

I need to add IP address ranges to my airport extreme firewall white list. This is so Security Metrics can access my computer and approve a scan for my credit card PCI compliance. How do i add ip ranges?

Sorry, but this option is not available with the AirPort routers. The only control you have over the AirPort's NAT firewall is either to enable/disable it or to configure it for Port Mapping. There are no option that supports whitelisting/blacklisting IP addresses/ranges.
If this is an important requirement, you may need to replace your current AirPort with another vendor's product that will support this.

How do I access external hard drive connected to AirPort Extreme via iPad

Hello,
How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
I donot have a Mac and I use windows laptop.

For your iPad, you will need an app, like FileBrowser, to access the external drive.
For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

How come my iMac and MacBook connect to my AirPort Extreme but my iPhone and iPad 2 won't?

How come my iMac and MacBook connect to my AirPort Extreme but my iPhone and iPad 2 don't?

Sorry, I should have been more clear. I am asking if the DNS IP addresses, not the IP addresses assigned by the DHCP service, are the same. DNS is like the Internet's version of the Yellow Pages. Your ISP typically will provide them to you or you can elect to use those provided by another source, like OpenDNS.
DNS is the service that translates a website's URL to its actual IP address so that you can access it. I am just trying to rule out that the PC is not configured properly with the correct DNS IP information.
The other thing to check is if the PC is configured to use a Proxy service. By default, it would not be.
Finally, what is the make & model of the PC. More importantly, if the PC is using either a PCI or USB wireless adapter, what is its make & model?

How can I mirror my macbook pro desktop through Airport Extreme to a digital projector with only VGA and DVI inputs?

How can I mirror my Macbook Pro desktop through Airport Extreme to a digital projector with only a DVI & VGA inputs?? Want to use it for presantation like Keynote/ Pages.

Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

Can I relace my BT Home Hub 2 with an Airport Extreme?

Can I replace my BT Home Hub 2 with an Airport Extreme?

No. The HomeHub has a built in modem that must be used to access your Internet service.
The AirPort Extreme is only a router. It does not have a modem onboard.
You could the AirPort Extreme with the HomeHub....but not instead of the HomeHub.

How can I connect to Internet when there is a Gigabyte switch after Airport Extreme?

I have a new Airport Extreme Base station. I have a wired home network set up through out the house. After the Airport Extreme, I have two gigabyte switches. I can connect to the network after the switch, but not the internet. I have also purchased new switches just to make sure this was not the problem. I connected the cable that goes into the switch into my laptop and was able to connect, however after the switch I still cannot connect. Wireless work fine. I need the wired connection for my DirecTv, X-box, Sony Bluray, etc. If it helps I have Comcast with a Motorola SB6120 Modem. Any suggestions as to how I can get connected?

Hi - I have only dealt with one question like this - it was with a different modem but it also had the new hi-speed technology and they were trying to connect the base station like you are with a new gigabit switch - the bad news is that no matter how many resets and reboots and different brand switches and cables were used, it wouldn't work - I told them to contact both the modem and the switch manufacturers but I haven't heard the outcome - maybe one of the gurus will weigh in an fill in the blanks.
Charlie

How can I add a security password to an Airport extended network?

I have an Airport Extreme network extended with an Airport Express and an older Airport Extreme. Everything works fine as is. I want to add a security password to the network but when I do, the two extending base stations appear in Airport Utility with an alert triangle next to them and when I select each of them, it asks if I want to "foget" that device. I do not want to forget those devices as they are extending the range of the network, I just want a password on the entire network for privacy. How do I accopliish this while still maintaining the extended network?

Conversely, set the security feature for each of the extending base stations first, then set the security for the main base sation. The extending base stations will go offline. Then back on once the main base station is configured with the same password as the two extenders.
(Found this on an older post about the same issue.)

How do I use existing TM backup with upgraded Airport Extreme?

I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?

djlstewart wrote:
I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information
No, it won't show that until a backup is done. See #B3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?
It should just do an incremental backup.
|
But, you need to know, backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).

How do I find a hard drive connected to Airport Extreme Base Station?

*Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

Hello Timothy Uhl. Welcome to the Apple Discussions!
Try the following to mount the disk...
o Click on the Desktop to enter Finder
o Go > Connect to Server...
o Enter 10.0.1.1 for the server
o Enter Disk Password
o Connect
If this still doesn't solve the problem, let's double-check your disk sharing settings...
AirPort Extreme Base Station (AEBSn) - File Sharing Setup
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Disks - File Sharing
o Secure Shared Disks: <With disk password | With base station password | With accounts >
(Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
o Guest Access: <Not allowed | Read only | Read and write>
o Share disks over Ethernet WAN port: (unchecked)
(Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
o Advertise disks globally using Bonjour: (unchecked)
o Workgroup: <Windows workgroup name>
o WINS server: <WINS server IP address>

How to connect a Time Capsule to an existing Airport Extreme?

I have an Airport Extreme connected to my broadband internet modem. This Airport Extreme is also connected to my audio system to be used by iTunes.
Recently I brougth my Time Capsule from another location to be included in the Airport Extreme network. I want to continue using Time Machine on the Time Capsule, and iTunes on the Airport Extreme.
I could get this to work, by connecting the Time Capsule to my modem, and setting it up to extend an existing network (the Airport Extreme network). Airport Extreme and Time Capsule are situated next to each other. However, performance of Time Machine was horrible, far too slow. If I connect my MacBook to the Time Capsule by an ethernet cable, it does not work.
When I set up the Time Capsule to create another wireless network, performance of Time Machine is okay. I cannot use iTunes on the Airport Extreme in that case. I have to switch networks for that.
I'm sure it should be possible to have both an Airport Extreme and a Time Capsule in one network, use iTunes on the Extreme, and Time Machine on the Time Capsule. But I do not know how it should be arranged.
Can anyone solve this problem?
Greetings from Holland, Koen

+What surprises me is that with setting 1 (TC joining AX) the Time Capsule has an option to extend the range of the network being joined.+
Yes, but it will only "extend" if you have a newer version of the AirPort Express, the 802.11"n" version. If you have an older "b/g" version of the AirPort Express, you can set the Time Capsule to "extend", but it won't and you'll have problems.
+With setting 2 (AX joining TC) the Airport Express does not seem to have this option.+
This probably confirms that you have an older "b/g" version of the AirPort Express. It does not have the "extend" feature.
+Could it be this option (which I did not switch off in my earlier experiments) which gave me such terribly bad transfer rates to my Time Capsule harddisk?+
That's probably the reason since the older version of the AirPort Express cannot be configured to "extend".

How do I add a hub or switch to Airport Extreme?

Similar Messages

Maybe you are looking for