How do I add a NAS as a registered user and not a guest?

I have just bought a lenovoez media and backup center.
I have a time capsule which it is plugged into, it shows up and I am writting all my files to it now. However it is on the shared network as a guest and not as a registered user like the time capsule.
I am being asked my password but it wont accept it.
Any help or ideas?
Philip

I presume you are on Mavericks?
Is the firmware of the NAS rated for 10.9 ?? When I checked it was only up to 10.8 and there have been changes.
Changing permissions on network drives is not that easy.. it is by nature a Guest device unless you create a folder with a proper use name and password.
Asking for username is just Mavericks being stupid, if that is what you use.
Simply mount the disk manually.
As SMB2 is often broken.. the recommendation I have seen is to mount it CIFS so in Finder, Go, Connect to Server.
CIFS://NASname or you can use its IP address.
You will then be asked the password. I have no idea what a guest account password for this device is. Often just type in admin will keep things happy.. or actually set a password.
Good luck.

Similar Messages

How do I add an included jsp to my project and not get a compile error?

Hi,
I have a project with some included jsp's however if I add them to the project, when I build I get a compile error as the jsp uses variables from the calling jsp.
Any ideas on how to get round this.
Thanks
DM

There are two main ways that I deal with this problem (yeah, it sucks, but it sort of makes sense that it happens...) (I presume you're talking static include here...)
#1 - name the included file with an extension that JDev will not try to compile (.jspf - for JSP Fragment - is common) Then it will be compiled in with the including page, but won't gag the project compilation. Advantage - it works, and you find out at compile time if you hosed up the variable reference. Disadvantage: JDev tries really, really, really hard to keep you from naming a JSP file with an extension of .jspf I normally create the .jsp file in JDev, remove it from the project, rename the file outside of JDeveloper, then add it back to the project - pain in the butt, but it works (and you probably aren't building scads of these included files...)
#2 - add the variable to be referenced to the pageContext implicit object as an attribute in your including page (ex, <% pageContext.setAttribute("myVar", myVar); %>), then reference that attribute in your included JSP (ex, <%= pageContext.getAttribute("myVar") %>) . It will compile fine (as the compiler has no way of knowing if the pageContext attribute actually exists, it just sees that the syntax is good and motors along merrily. Advantage: don't have to have differently named JSP files (which isn't actually a big deal). Disadvantage: You hvae to add the variable to the pageContext (and you have to always add Object derivatives, as primitives won't go into a hash) and you don't find out if you screwed the variable up until runtime (when it tries the getAttribute, which could return null if you didn't properly set it to start with) vs at compile-time w/ the direct reference.
HTH!
Jim

How do I add an already built Shopping Cart (PHP and MYSQL) application to a page in a Muse site?

How do I add an already built Shopping Cart (PHP and MYSQL) (Cartweaver 4) application to a page in a Muse site? Do I have to export the Muse site as Html to dreamweaver and them use the extension to bring the shooping cart in or can I do it directly in Muse?
Message was edited by: mgv2048

We have experimented with doing this with some good success. We have been working on adding Cartweaver to a Facebook page by essentially adding a Cartweaver store to Facebook in an iframe. The "store" would be pages with just your basic product display, cart, and checkout functionality, with none of the "window dressing" - just use CSS to match the color and general look of the design it's being added to.
The one problem with this for Facebook is when it comes time to check out toy have to leave Facebook and go to your server where an SSL is in place. Fortunately in this situation this would not be the case, you can have an SSL installed to the root of your site and you'll be okay.
This is an interesting project. Give this a try and let me know how it goes and if you run into any snags, please make a post on the Cartweaver forums: http://forums.cartweaver.com - I'm really confident that this can work, and not only work, but work well.
Looking forward to hearing how this goes, and being of what help we can.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
PHP & ColdFusion Shopping Cart for Adobe Dreamweaver
Stay updated:
http://www.facebook.com/cartweaver
http://www.twitter.com/cartweaver
http://blog.cartweaver.com

How do I add photos to the camera roll that were not taken on my iPad? I imported photos to my iPad from my camera, and now I want to add them to my camera roll which is sync'ed with Dropbox as a back up mechanism.

How do I add photos to my camera roll that were not taken one my iPad? I have iMported photos from my camera to my iPad. Theses photos are in the imported photo album. I want to move these photos to my camera roll but can't figure out how to this. I want them in my camera roll because that is the album that syncs with Dropbox where I want to backup my photos. Thank you for your help.

Consider using sshfs to mount your Pi from your Linux boxes. It's much easier to configure and manage than samba. It sounds like you already have your Windows machines mounting your Pi so Samba is doing its job in that respect.
More info on sshfs in the Wiki: https://wiki.archlinux.org/index.php/Sshfs
To help get you off the dime, here's a modified line from my fstab that I use to mount my Pi with:
gav@PI:/mnt/backup /mnt/rpi/backup fuse.sshfs rw,relatime,user_id=0,group_id=0,allow_other 0 0
Subsitute my mount points with yours.
For a password-less mount:
ssh-copy-id gav@PI
after you've set up ssh and generated some keys on your client box.
Here are some relevant lines from the smb.conf file on my Pi that I use for my one Windows box in the house that might help you with your write permissions:
security = user
hosts allow = 192.168.1.0/255.255.255.0
guest account = gav
; And my share setup:
[rpi]
comment = Public Stuff
path = /mnt
writable = yes
; printable = no
; write list = @krb
[torrent_dl]
path = /mnt/video/torrent_dl
writable = yes
create mask = 0770
directory mask = 0770
guest ok = Yes
case sensitive = No
read only = No
Hope this helps.

How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?

how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.

Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps!

How do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive

how do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive

It is on the internal boot drive by default.
How/why did you change it?
It is on the internal boot drive by default.
How/why did you change it?

Every time I try to download a free or paid app or in iTunes it asks me for a credit card. (Which i don't have one) How can i download free apps without a credit card and not reset my apple ID? I already put in 20$!!!!!

Every time I try to download a free or paid app or in iTunes
it asks me for a credit card. (Which i don't have one)
How can i download free apps without a credit card and not reset my apple ID?
I already put in 20$!!!!!

How to Get Apps From the App Store Without a Credit Card
http://ipadhelp.com/ipad-help/how-to-get-free-apps-from-the-app-store-without-a- credit-card/
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
http://support.apple.com/kb/ht2534
If None is not available - On your computer launch iTunes and click "iTunes Store" in the left navigation pane. Click the "down arrow" next to your name at the top right side of the page and click "Account." Enter your username and password and click "View Account" to log into your account information. Next to your Payment Type, click "Edit." Select the "None" button and click "Done." Confirm that your card has been removed by returning to the Apple account information screen. Under Payment Type, it should say that there is no credit card on file.
 Cheers, Tom

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

How can i get my items to stay in place and not cross over each other when readjusting the browser s

How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advance

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

How to get my images always order by file name, and not by time of captur, in all the folders in the library?

How to get my images always order by arquive name, and not by time of captur, in all the folders in the library?
Sorry for the poor english, but im portugues.
In the library we can change the order of classification of image by, time of capture, name of file etc... I'm wondering if its possible define to be always by the name of file.
It ´s possible?
And i have other question, in print label we have an option to auto rotate to feet in page to have the image using the maximum area in the page (auto rotate, zoom etc), its possible to change the orientation of the rotation to be always in the other direction?

The Muvos are USB Mass Storage devices and do not have the ability to display track information based upon ID3 tags.
The Zens all read and display track info based upon ID3 tag information that is either gathered from an online source or entered by the end-user.
If you want the track information displayed instead of the ID3 tag information, you could edit the ID3 tags and rename the title to whatever you have as the file name. Not sure why your file names would differ so much from the ID3 tag info though, almost all of my content has the same name for the filename as it does on the ID3 tag title.

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

How can I email a photo as an attachment only and not as a photo in the body of the email?in the message

How can I send a photo as an attachment only and not in the body of the email?

Just drop it into the message. It goes as an attachment. Or select the image, CTRL- or RIGHT-click and select Compress .... from the context menu. Then attach the archive.

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?

When I facetime the ipad (email address) it calls my phone. The accounts are completely separate. How can I get this to only call the ipad and not my phone as well?
It calls both the ipad and iphone when calling the associated email address for the ipad. However, when I call the iphone it does not call the IPAD.
Thanks for your help

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

How do I add a NAS as a registered user and not a guest?

Similar Messages

Maybe you are looking for