How do I add a second URL to the same contact

How do I add a second URL to the same contact. There are 3 URL for this one company depending on which division I need to look at. I could 3 contacts but having the 3 URLs on one contact is easier for me

Tap the "Edit" button in the upper right corner of the contact's screen. Tap the green "+" (which says add URL) next to it) below whatever URL you currently have entered.

Similar Messages

I am using photos . I add a camera and make my photos slide in. How do I add a second behavior to the photo to make it slide out. I want the photo to hold on the screen for a few seconds in between sliding in and sliding out.

I am using photos in Motion 5. I add a camera and make my photo slide in. How do i add a second behavior to the photo to make it slide out? I want the photo to hold for a few seconds in between sliding in and sliding out. When I am trying to do this I am not getting the photo to hold, i am making one continuous motion which I do not want.
Thanks

Are you using the "motion path" behavior? If so just duplicate it and drag it down the timeline to where you want it to start. Trim it to end at the end of the project. The gap you leave in the timeline between the two behaviors is your hold time. Not sure why you are using a camera unless you have a behavior on the camera.If you are using keyframes just set two keyframes at the same position values in the inspector for the hold time.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

Phone A = phone with information you want duplicated
Phone B = phone that you want to copy from A
Backup Phone A.
Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

How do i add a second itunes account on same email

How do i add a second itunes account on the same email address?

Create a new AppleID (or use a different one if you are already doing so), then sign onto the iTunes Store that way and set up payment etc.
There's many other aspects to this question, including if you want this all to go to the same library, the same user account on the computer, etc.
Warning: For the purposes of redownloading items (make sure you understand redownload vs. first time download) you can only change primary AppleID associated with a computer every 90 days. For other things such as buying new items there is no restriction.
Items purchase under one account cannot be transferred to another. you will still always have to use the old ID for any purchase you made under that ID.

How can I delete multiple copies (600 ) of the same contact that ended up on my iPhone after backing it up on iTunes?

In syncing my iPhone 3GS on iTunes, I now have many copies of the same contact -over 1,000 in one case-on my iPhone. How can I delete these multiple copies without doing it one by one on my iPhone and how can I prevent it from happening again? I have Outlook Contacts and MSN contacts -- iTunes is supposed to be syncing to my Outlook contacts, but I don't have multiple copies of any of my contacts there. HELP! Thanks!

The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way.

Ability to add multiple email addresses to the same contact person

Hello SRM Experts,
I have a question in SRM 5.0
In "Personal Data" tab of "Employee Data" in Manage Business Partner, we have the ability to add multiple email address. But only one email can be selected as standard.
We have a new requiremnt that more than one email address has to be selected. Which means, when a bid invitation is published, the email notification has to go to all the email addresses from that list.
How can this be achieved?
Any information would be appreciated.
Thank you

By default the system send intimation to only one email id to the contact person.
If you want to be send to the multiple email id for a contact person. you need to implement the same in the BADI..
Try to find the BADI which is called on save of Bid invitation. You can check of the 'Published' status in the BADI method and fire the emails as required.
Regards,
Ramesh

How to call two different servlet-url in the same application

Hi,
I want to call, consecutively these methods in my application.
response.sendRedirect(servlet-url1)
reponse.sendRedirect(servlet-url2)
but the second method dont answer,
I think, the first method redirect s with response ,
but how to call two different servlet ?
thanks

if you call the first redirect, the servlet is getting aborted, so you can redirect to the first servlet, working the stuff in it, and then in the second servlet you can redirect to the third servlet

Can I add a second account on the same credit card?

My daughter has her own macbook and iphone, and I want her to have her own itunes account, but under my credit card. How do I set up another account? I only see options for changing my existing account, not adding another one. thank you!

Morning srs60,
Thanks for using Apple Support Communities.
You can create an Apple ID on your computer or iOS device so you can shop on the iTunes Store.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/ht2731
Hope this helps,
Mario

Add second image of the same category of xml

I ask everyone's help to add a second image of the same category of my xml.
banco.xml
<?xml version="1.0" encoding="utf-8"?>
<photos>
          <photo>
                    <filename>01.png</filename>
                    <filename2>01-01.png</filename2>
                    <title>Bolsa Feminina Pequena</title>
                    <description>
                    Descrição é aqui, 25 cm altura
                    </description>
                    <valorde>199,00</valorde>
                    <valorpor>159,90</valorpor>
                    <marca>Jhenyfer loopes</marca>
          </photo>
          <photo>
                    <filename>02.png</filename>
                     <filename2>02-01.png</filename2>
                    <title>Bolsa Feminina Longa</title>
                    <description> Descrição é aqui, 25 cm altura </description>
                    <valorde>89,00</valorde>
                    <valorpor>69,99</valorpor>
                    <marca>Ana Gabriella</marca>
          </photo>
</photos>
Action
import caurina.transitions.Tweener;
var folder:String = "photos/";
var timer:Timer;
var i:Number;
var tn:Number = 0;
var pic:Number = 0;
var previous_no:Number = 0;
var current_no:Number = 0;
var tween_duration:Number = 0.2;          // seconds
var total:Number;
var flashmo_xml:XML;
var flashmo_photo_list = new Array();
var photo_group:MovieClip = new MovieClip();
this.addChild(photo_group);
this.addChild(photo_title);
this.addChild(photo_description);
this.addChild(valor_de);
this.addChild(valor_por);
this.addChild(mc_marca);
photo_button.alpha = 0;
photo_button.buttonMode = false;
photo_group.x = flashmo_photo_area.x;
photo_group.y = flashmo_photo_area.y;
photo_group.mask = flashmo_photo_area;
photo_group_info.text = "";
photo_title.text = "";
photo_description.text = "";
valor_de.text = "";
valor_por.text = "";
mc_marca.text = "";
function load_gallery(xml_file:String):void
          var xml_loader:URLLoader = new URLLoader();
          xml_loader.load( new URLRequest( xml_file ) );
          xml_loader.addEventListener(Event.COMPLETE, create_photo_rotator);
function create_photo_rotator(e:Event):void
          flashmo_xml = new XML(e.target.data);
          total = flashmo_xml.photo.length();
          for( i = 0; i < total; i++ )
                    flashmo_photo_list.push( {
                              miniatura: flashmo_xml.photo[i].miniatura.toString(),
                              filename: flashmo_xml.photo[i].filename.toString(),
                              title: flashmo_xml.photo[i].title.toString(),
                              description: flashmo_xml.photo[i].description.toString(),
                              valorde: flashmo_xml.photo[i].valorde.toString(),
                              valorpor: flashmo_xml.photo[i].valorpor.toString(),
                              marca: flashmo_xml.photo[i].marca.toString()
          load_photo();
          photo_title.text = flashmo_xml.photo[0].title.toString();
          photo_description.text = flashmo_xml.photo[0].description.toString();
          valor_de.text = flashmo_xml.photo[0].valorde.toString();
          valor_por.text = flashmo_xml.photo[0].valorpor.toString();
          mc_marca.text = flashmo_xml.photo[0].marca.toString();
function load_photo():void
          var pic_request:URLRequest = new URLRequest( folder + flashmo_photo_list[pic].filename );
          var pic_loader:Loader = new Loader();
          pic_loader.unload();
          pic_loader.load(pic_request);
          pic_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, on_photo_progress);
          pic_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, on_photo_loaded);
          pic++;
function on_photo_progress(e:ProgressEvent):void
          var percent:Number = Math.round(e.bytesLoaded / e.bytesTotal * 100);
          photo_group_info.text = "Loading image... " + pic + " of " + total + " (" + percent + "%)";
function on_photo_loaded(e:Event):void
          if( pic < total )
                    load_photo();
          else
                    photo_group_info.text = "";
          var flashmo_pic_bm:Bitmap = new Bitmap();
          var flashmo_pic_mc:MovieClip = new MovieClip();
          flashmo_pic_bm = Bitmap(e.target.content);
          flashmo_pic_bm.smoothing = true;
          flashmo_pic_mc.addChild( flashmo_pic_bm );
          flashmo_pic_mc.name = "flashmo_pic_" + photo_group.numChildren;
          if( photo_group.numChildren > 0 )
                    flashmo_pic_mc.alpha = 0;
          photo_group.addChild( flashmo_pic_mc );
function change_photo():void
          if( current_no >= photo_group.numChildren )
                    current_no = 0;
          if( current_no < 0 )
                    current_no = photo_group.numChildren - 1;
          Tweener.addTween( photo_group.getChildAt(previous_no), { alpha: 0, time: tween_duration,
                                                    transition: "easeInOutQuart" } );
          Tweener.addTween( photo_group.getChildAt(current_no), { alpha: 1, time: tween_duration,
                                                    transition: "easeInOutQuart" } );
          previous_no = current_no;
          photo_title.text = flashmo_photo_list[current_no].title;
          photo_description.text = flashmo_photo_list[current_no].description;
          valor_de.text = flashmo_photo_list[current_no].valorde;
          valor_por.text = flashmo_photo_list[current_no].valorpor;
          mc_marca.text = flashmo_photo_list[current_no].marca;
function pic_over(e:MouseEvent):void
          var mc:MovieClip = MovieClip(e.target);
          Tweener.addTween( mc, { alpha: 0.1, time: tween_duration, transition: "easeIn" } );
function pic_out(e:MouseEvent):void
          var mc:MovieClip = MovieClip(e.target);
          Tweener.addTween( mc, { alpha: 0, time: tween_duration, transition: "easeOut" } );
flashmo_previous.addEventListener( MouseEvent.CLICK, pic_previous );
flashmo_next.addEventListener( MouseEvent.CLICK, pic_next );
function pic_previous(e:MouseEvent):void
          current_no--;
          change_photo();
function pic_next(e:MouseEvent):void
          current_no++;
          change_photo();
I created a movieclip with instance name flashmo_photo_area2
PROJECT DOWNLOAD
http://www.solutionvix.com/as3project2012.zip

The project is working normally I want is to add another image to display on the screen capturing the second image of the same category of xml.
Example xml:
<photos>
          <photo>
                    <filename>01.png</filename>
<filename2>01-02.png</filename2> <-- add
                    <title>Bolsa Feminina Pequena</title>
                    <description>
                    This flash photo rotator is provided by flashmo.com for free of charge. You may download, edit and use the source file for any purpose. Lorem ipsum dolor sit amet, consectetur adipiscing elit.
                    </description>
                    <valorde>199,00</valorde>
                    <valorpor>159,90</valorpor>
                    <marca>Jhenyfer loopes</marca>
          </photo>
Action
flashmo_photo_list.push( {
                              filename2: flashmo_xml.photo[i].filename2.toString(), <-- add
                              filename: flashmo_xml.photo[i].filename.toString(),
                              title: flashmo_xml.photo[i].title.toString(),
                              description: flashmo_xml.photo[i].description.toString(),
                              valorde: flashmo_xml.photo[i].valorde.toString(),
                              valorpor: flashmo_xml.photo[i].valorpor.toString(),
                              marca: flashmo_xml.photo[i].marca.toString()
function load_photo():void
???????? <-- add
          var pic_request:URLRequest = new URLRequest( folder + flashmo_photo_list[pic].filename );
          var pic_loader:Loader = new Loader();
          pic_loader.unload();
          pic_loader.load(pic_request);
          pic_loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, on_photo_progress);
          pic_loader.contentLoaderInfo.addEventListener(Event.COMPLETE, on_photo_loaded);
          pic++;

How can I add a second email account to my IPad

How do I add a second email account to my Ipad

Settings>Mail, Contacts, Calendars>Add Account.

How do i add a second page to a document in Pages 5.2.2

How do I add a second page to a document in Pages 5.2?

Hello jeddi17,
You can insert a page break with the Insert (menu) > Page Break.
Note if your typing overflows the first page, then a new page is automatically created.
Pages for Mac 5.0: Change the flow of text
http://support.apple.com/kb/PH15334
Force text to the next line or page
A line break, also called a soft return, starts a new line without starting a new paragraph. A page break moves the next line of text to the top of the next page.
Click where you want the break to occur.
Do one of the following:
For a line break: Press Shift-Return.
For a page break: Click Insert in the toolbar, then choose Page Break.
Take care,
Nubz

How do I add a second iphone to my itunes account?

How do I add a second iphone to my itunes account?

Just activate and/or sign into your iTunes account on the second iPhone. I have 5 iOS devices on my single iTunes account.

HOW DO I ADD A SECOND IPHONE TO MY ACCOUNT

How do I add a second iphone to my account?

Contact your carrier and add a second phone to your account.
If you want to put your Apple ID on a second iPhone, do so.

How do I add a second computer to my account?

How do I add a second computer to my account?

Your single license allows you to have two active installations, meaning you can have it installed and enabled on two machines. You can have the software installed on as many machines as you like, but only two of them can be in an activated state at a given time.
As far as using the two machines at the same time goes, the jury is currently out on that - I had the question in for clarification but did not get a response yet. They recently rewrote the license agreement and the portion that explicitly stated you cannot use the two at the same time was either removed or relocated somewhere else that I have yet to find.
If you mean that you want to have another machine licensed for someone else to use then you need to buy a new license for that other person.

Hi How do i add a second signature to my iMAC so i can use it to witness documents?

Hi How do I add a second signature to my iMAC so I can use it to witness documents?

What iMac do you have, running what version of OS X?
Your question is unclear - what do you mean by 'a signature on your iMac'?

How do I add a second URL to the same contact

Similar Messages

Maybe you are looking for