How do I add a time and date stamp onto my pictures?

Can anyone tell me how to place a time and date stamp on all my pictures?

DTRAND wrote:
How do I go about creating a script, how do I run it, and where do I run it
(ie: exactly the steps)... sorry I am new to this.
You don't need to learn scripting. Just ask in the scripting forum if they can help you.
They will point you to an existing one or might even do one for you.
http://forums.adobe.com/community/photoshop/photoshop_scripting

Similar Messages

How do I keep the time and date stamp of my photo when exporting from iphoto

Hi,
I notice the time and date stamp changed when I exported the photos from iPhoto 11 to a external HDD.
When I looked at the information about the exported photos on my external HDD the time and date changed to the time and date of when I exported the photos form iPhoto instead of keeping the time and date information of when the photo was taken as it appears in iPhoto.
I thought the time and date stamp is in the meta data of the photo file and can't be changed, am I correct?
Thanks,

Kyzelios,
How can view the meta data from "finder" or do I need a 3rd party app?
"Get info" function only gives me the creation date which is the export date and time.

How do I make the time and date stamp correct for my documents, songs in itunes, etc.

No matter when I add a song or save a document it says it was added/saved on 1/5/2011. It would be great if somehow I could get back the dates and times that things were added, but I know that may be impossible. I just want a way to have the correct time and date stamp from now on. Finally it wasn't always like this, when I first got the computer everything was correct, I just started noticing it. Additionally my clock is correct, so I don't understand why things aren't saved according to the clock. Thanks in advance

Resetting your Mac's PRAM and NVRAM

How can i add the dimensions and data loading into planning apllications?

Now please let me know how can i add the dimensions and data loading into planning apllication without manuallly?

you can use tools like ODI or DIM or HAL to load metadata & data into planning applications.
The data load can be done at the Essbase end using rules file. But metadata changes should flow from planning to essbase through any of above mentioned tools and also there are many other way to achieve the same.
- Krish

How to get the start time and date

Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu. However on the test page for the fax the time and date are showing Jan-00-00 00:00AM. I do not know how to change the date and time. Please help. Thanks.
This question was solved.
View Solution.

Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to get FMS server time and date

hi,
i m working on a customer support chat application. There is
neccssary for me to get the FMS server time and date, bcoz
depending on the server time and date the client instances recive
different messages.
i looked at date() function on FMS server, but it returns
user PC time ( not FMS server time).......
so i there any way to get FMS server date and time??
thanks in advance
shrikant

See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How to get Correct curent time and date

Hi,
I would like to know whether system keeps updating SY-UZEIT each second or it contains the time value when the program was started.
Suppose a program starts at 12:00:00 time and takes 10 sec to finish. Will I get same value of SY-UZEIT or will i get 12:00:10 as value of sy-uzeit just before completetion of program?
If the time is not updated each second, how can I get the correct time?

Hi surya,
the SY-UZEIT will not be automaticly updated in the runtime.
you have to use GET TIME.
Here a short example to show the different:
REPORT ZGRO_TEST.
TABLES: MARA.
write: / 'without get time'.
WRITE: / SY-UZEIT.
SELECT * FROM MARA up to 10000 rows.
ENDSELECT.
WRITE: / SY-UZEIT.
write: / 'with get time'.
get time.
WRITE: / SY-UZEIT.
SELECT * FROM MARA up to 10000 rows.
ENDSELECT.
get time.
WRITE: / SY-UZEIT.
regards, Dieter

Workflow Approval Time and Date Stamp SharePoint 2010

Hello guys,
I hope you can help me. I try to start a parallel workflow with at least two persons. They can approve independently, but I need the approval date and the time from these person, but I only get one approval date. When the workflow is finished. How can I
get the different approval dates from the persons within the workflow?
Best regards
Matthias

If you are using the "Sharepoint Approval process" you can do that.
This is an example but you can do that in a diferent way:
On SPDesigner workflow editor, you need to create one variable for each date you want to save. EX: Date1 and Date2
Then, open the approval process, and go to "Change the behavior of a single task"
Then, on "When a Task Completes" section, add the following:
if CurrentTask:Outcome equals Approved
if Date1 is Empty
Date1 = currentTask:Modified
else
Date2 = currentTask:Modified

Time and date stamp

Hello. I am trying to add a time/date stamp to my inputs to LV. There are some comments here that I went through but they didn't seem to fit my application. With each tick of the timer I am collecting 5 inputs. Whate I would like is for the final column to have a time/date stamp. I have tried using the Vi's which seem appropriate for this however, they dind't have the affect I had hoped. All I want is for each tick of the clock and a sample is collected, to have he time stamp corresponding to that data.
Thank you

Yes, I've understood what you mean for a bit now and I've been telling you what to use, even linking to VIs.
Here is a step-by-step list of what you need to do to get your data to be in the same format as your timestamp:
Open the Timing palette, click Get Date/Time in Seconds, place it inside your loop.
Open the Timing palette, click Get Date/Time String, place it inside your loop.
Wire the output of Get Date/Time in Seconds to Get Date/Time String.
Concatenate the outputs of Get Date/Time String
Place Number to Fractional String inside your loop.
Wire array of data (capacitance, dissipation factor, voltage) to the Number to Fractional String VI
You now have all of your data and timestamps in the form of strings. Build an array of all of these strings and write to spreadsheet. If you want the timestamp as the last column, then build the array with the timestamp after the data. Surely you can figure that part out now.

How do I change the time and date on a specific photo

I import photos from various cameras in the family. Not everyone has the date or time correct. In all older versions of iPhoto I could edit the date and time whenever the info field was available. In the current version all I can find reference to is the date for an event - not the individual photo or any means to change the time.

Great -- and note that you can create a smart album by camera type to make it easy to correct the time info for a camera that was set differently -- the adjust T/D command changes all selected photos by the same amount of time
LN

How to restore the default time and date?

HI i have encountered with a problem very i have got in screen, one date field and input field TEXT Field name i have give as the <tablename-<tablefield>> like ZFIR-DATES reason giving name like this is i want to save the date in a table ZFIR when i click save. When i am clicking save date is storeing but the problem is date is not displaying defaultly.....on the screen
codeing part..
DATE(10) TYPE C.
before output screen no 100
DATE = SY-DATUM.
Thks

The format of the variable on the screen needs to be the same as the global definition - if it's a date field on the screen then you should have something like
data:
g_date like sy-datum. "naming convention g = global
and g_date on your screen as a date-type field, then in your PAI where you store ZFIR
ZFIR-DATES = g_date.
Jonathan

How can I tell the time and date changed for my pr...

Just had a problem with my bestfriend whom I believe hacked into my profile. Now I want to find out how I can have access to history of when I have posted a different display picture and the alike. thanks

Sheryl Kingstone wrote:
but does it show on the final burned project?..
it does..
.. but how does Mrs AppleMan handle all that kissing.. ?
greetings to T & K..

Time and Date Stamp Format and User name

Hi All,
I am very new to adobe acrobat so forgive my ignorance. I am trying to add a date and time stamp to pdf files using adobe acrobat so that when they are printed using adobe acrobat the print date will be automatically added. First I have found the below script on the forum which is entered as a field, will this work using acrobat version 5 or version 7? Also i believe that the date format is 10/01/2009. How can I change this so that it will be in the 01 October 2009 and 24 hour clock format? Finally how do I also add some descriptive text before the date and time i.e. 'print date' and 'not valid 24 hours after printing'?
var f = this.getField("today");
f.value = util.printd("mm/dd/yyyy
h:MM tt", new Date());
One last question is there a way to add a user stamp to a pdf so that when the document is printed out the user's name is printed i.e. 'printed by J Smyth'.
Many thanks,
John

As noted, you need to change the formatting string to generate the date appearance as you need. You can add additional text to this string using the concatenation string operator, '+'. So you can do:
var f = this.getField("today");
var sDate = util.printd('dd mmm yyyy HH:MM tt", new Date())
f.value = 'Print date: ' + sDate + ' not valid 24 hours after printing';
All of the above information is covered in Adobe's freely down loadable Acrobat JS API and there are additional resources for JavaScript programing at the Acrobat Users Community and Planet PDF.
Accessing the 'identity' object is more complex. First, all users will need to complete the 'Identity" information for the application's preferences, as only the login name is picked up from the OS. Then each user will need to have an application folder level JavaScirpt installed on their computer to capture this information during the application initialization of Acrobat/Reader
// Folder level script to create an application level variables for the "identity" objects properties
var Identity = new Array(); // array for the identity objects elements
Identity.Corporation = identity.corporation;
Identity.Email = identity.email;
Identity.LoginName = identity.loginName;
Identity.Name = identity.name;
// or
var Identity = new Array();
for (i in identity)
Identity.i = identity.i;
You can then access the items in a PDF by adding the array element name to the Identity array:
// set a fied's value to the value of:
this.getField("loginName").value = Identity.LoginName;
this.getField("name").value = Identity.Name;
this.getField("by").value = "By: ";
this.getField("by").value += Identity.Name;
You can find the necessary JavaScript folders for Acrobat using the following code in Acrobat's JavaScript debugging console:
app.getPath("app","javascript");
app.getPath("user","javascript");

How do i get my information and data back onto my 4s?

Let me tell you how it happened and see if you can find an answer: I was going to the computer that i use to put music on to load some music on to my 4s. when i opened itunes, it said "set up as new iphone" or "set up from backup". i chose the "from backup" because i had an old 4s, but the speakers wern't working, so i got a new one, but the last backup to restore it from was from a couple of months back. i chose it, and it synced my iphone, but i hadn't done anything yet. when i checked my iphone, all of my contacts, notes, email accounts were gone. im desperate and how do i get this information back on?

Thanks for replying. I had to do this process in order to get ICloud activated so I don't have it there. I do have an external backup of the Itunes library, but it sounds like that would also restore the restriction password that I don't know.
Why would ICloud be different (if I had backed up there?) Does it only save data?
And It sounds like I need to keep my contacts in another source .... such as? ... No, I don't use email much and my contacts arec the phone numbers I've captured in my phone. After I have them backed up to ICloud, do I also need to make sure they are somewhere else to where I won't run into losing them again?
appreciate your experience and help.

How do I add a time and date stamp onto my pictures?

Similar Messages

Maybe you are looking for