How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

I have Final Cut Express 4 & LiveType 2.1.4, I'm not sure how to add titles or test to a video clip, and the tutorials for Final Cut Express 4 don't say how to get started in LiveType. How do I simply add text? The tutorials say how to add effects to the text they just don't say how to add it to the clip or how to get the clip into LiveType.

Well, you don't actually _add text_ to a video clip, you _create a text clip_ and add that clip to your timeline, either adjacent to an existing clip or on the next higher track if you want to layer the text with an existing video clip.
The very simplest way to add text is to use one of the *text generators* built into FCE. Lower Third, Text, Scrolling Text, etc. allow you to create various text clips and give you basic controls over fonts, positioning, size, color, etc. You can find the text generators in the Effects tab in the FCE Browser.
LiveType is a separate and more sophisticated application that enables you to do all sorts of things with text (much more than can be done with the FCE text generators). The basic process is - create your title in a LiveType project. Save the LiveType project. Then in FCE, import the LiveType project; from there, you can treat it just the same as any other clip.

Similar Messages

Xacti HD and Final Cut Express -- It used to work great! How do I go back?

I have a Sanyo Xacti HD700. It gives me 1280x720 MPEG-4 AVC/H.264 files, which my Mac just loves. I used to be able to quickly edit the clips together in Final Cut Express, export using complementary QuickTime settings (specifically, those recommended by Vimeo for HD playback), and get beautiful MP4 files, relatively quickly.
Then, one day, a friend needed me to edit a quick video using a DV camcorder. It was confusing as heck getting the footage into FCE, and not particularly elegant getting it out. But, the project was done overnight, I washed my hands of it, and wanted to get back to making beautiful MP4 files again, relatively quickly.
Except I can't! Now, for one, encoding takes hours. Hours! My source videos and export videos are very similar, yet I sit and watch as the estimate for completion actually goes up for an hour before slowly coming back down.
And frankly, that would be fine, except now my exported videos are the wrong size. They include letterboxes, and the video itself is squished, stretched. So I wait four times as long for a ghastly video. The best I could do is use the Quicktime export settings to "crop off" the letterboxing, but there's still some black bars and it's just not the same.
Here's how my videos used to look:
http://vimeo.com/1067235
Here's how an exported video looks now:
http://vimeo.com/1655414?pg=embed&sec=1655414
What happened? Out of the box, everything worked perfectly. Now, tainted with actual tape, Final Cut Express seems like it's running my videos through six extra wringers and giving me clips worse than I'd get just cut-and-paste editing the Xacti files in QuickTime Pro!
I Googled my brains out, and all I've learned is, if I had Final Cut Pro, "Project Settings" would have all the switches I need. Well, I don't have FCP, just FCE.
Somewhere, something was set that I want to unset. Can anyone help? Do I have to delete every trace of FCE and just reinstall?
Mahalo for any advice!

It sounds like you didn't change the settings after you made the DV video. Did you switch it back to 1280x720 and make a new sequence in that format? Check item properties for the sequence you edited. What does it say? Also check item properties for any media you captured since working in DV.

Boris Calligraphy, Title 3D, and Final Cut Express HD 3.5

Help!!
So I'm working through Tom Wolsky's book (Final Cut Express HD 3.5 editing workshop) and I just got to lesson 12 to work with Title 3D. Well when I go to start the lesson, I try to call up the Title 3D from the generator menu in the viewer. The pop-up displays all the different selections except for Boris/Title 3D. I can't find it anywhere on the program. I've searched in my preferences folder on my HD and I noticed that the BorisFX plugins where installed and that Title 3D (in the Final Cut Express preferences folder) was also there. I've tried discarding the plugins and reinstalling them and that doesn't even seem to work. Does anyone have any idea why my FCE will not let me access Title 3D? Anyone else come across this problem? Tom, what do you think?

I tried reinstalling - no joy.
After some digging around on Google I found this forum post:
http://forums.creativecow.net/readpost/15/857437
Looks like the QuickTime 7.4 update broke a number of things including the Boris plug-ins. Basically they have lost their bundle flags so are not being recognised by Final Cut Express (or Pro). If you look at one of the replies to the above post there's a link to a file you can download which contains plug-ins with the bundle flag set - here's a direct link to the file:
http://www.borisfx.com/download_files/CalligraphyForFCP.dmg
Just copy the Title 3D.bundle and Title Crawl.bundle files to the following folder, overwriting the existing ones:
/Library/Application Support/Final Cut Express Support/Plugins
This fixed the problem for me.

How do you animate a title placed over video clip

I have been trying to animate a still title that I have placed over a video clip in expert view. There is only one line. I have followed the following which I think I got from the Adobe site:
Create a title with animated text
You can easily apply a preset animation to any still title. Text animation presets quickly and easily
animate the characters in your title so that they fade or pop characters into view, or fly in from the
top or bottom of the screen. For example, using the Fade In By Characters preset instantly makes
each separate character in your title fade into view until the title is complete.To preview an
animation, position the pointer on the Animation tab in the Adjust panel.
1. Do one of the following:
In the Quick view timeline, select the superimposed clip. In the Monitor panel, click the clip,
and then double-click the title text.
In the Expert view timeline, double-click the title clip.
The Adjust panel changes to display the text options.
2. In the Adjust panel, select an animation preset under the Animation tab.
3. Do one of the following to apply the preset to the title:
Click Apply.
Drag the preset to the Monitor window and drop it on top of the title text
I have had no success no matter what I've tried. I have a mac. I would value any suggestions.
Thanks.
barb

SG
Thanks. But let me clarifiy what I suspect Barb's issue is
a. not selecting the Text in the Text section of the Titler before applying the animation in Animation section of the Titler.
or
b. what I did not yet write, not using Default text since Text Animation does not work with Default crawl or roll
or
c. trying to use more than one line of text without the use of special procedures.
(I sort of put this thought aside when I replied since Barb wrote
I have been trying to animate a still title that I have placed over a video clip in expert view. There is only one line.
I interpreted that as only one line of text was typed in the Titler, not that there were two lines of text types.
But, the answer should be one of the 3. More details from Barb should help us to pin point the problem.
I think it was JohnnyO who first pointed out (your forum at few years back) that you can indeed apply Text Animations to more than one line of text in Premiere Elements Titler, but with the use of special maneuvers. I wrote about this and did a detailed step by step and overview on the matter.
ATR

How can I transfer this video from a disc to Final Cut Express?

There's an empty Audio_TS folder and a Video_TS folder containing VOB, BUP, and IFO files. Please keep in mind, I don't know what any of that means :3
I tried to use Quicktime but it said they're not video files... but it can play on the dvd player app.
It's a video my grandma wants me to edit, I have no information about like, how it was shot or anything.
Hopefully this is an easy issue for anyone who knows anything. Thanks so much for your time!

You'll need to convert the DVD's VOB files into an editable format that FCE works with natively. MPEG Streamclip (freeware) can do the conversion, but you'll have to purchase the QuickTime MPEG-2 Playback Component from Apple for it to work properly: http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x ($19.99 USD from Apple). If you iuse MPEG Streamclip, here's a tutorial on how to convert for editing: http://www.secondchairvideo.com/?p=739
Or you can use an app like DVDxDV (not freeware).
-DH

How to pull video clip into Shake from final cut?

When I right click there is no send to that comes up. How do I get this to work?

Did you highlight all the clips involved first? Do you have FCP 5.0 or higher?
Shane

How to change framerate in Final Cut Express

Hello everybody - Just a simple question. How can I change the framerate to 24 fps of a sequence within Final Cut Express? Or to any other framerate? Thanks

OK, at least it's clear for me now, thank you very much

How do you add subtitles/text to a video?

How do you add subtitles/text to a video? Is it even possible? I'm working on a video with interviews and I want to write what they are saying underneath.

Take a look at the Ticker Tape title.
Also, you can use any Lower Third title. For subtitles, use the second line of the Title, or set the first line so that the Font size is the same as the second.

How do i add photos in my Ipod Video?

How do i add photos in my Ipod Video and View them?

Can you just open your ipod like a hard drive and put photos in the folder named Photo
You need to let iTunes handle the transfer in order for the pictures to be viewable on the iPod. iTunes creates specially sized preview images and organizes the pictures & previews as it does for music files. If you put the pictures on manually through Windows Explorer and the iPod hard disk "interface", then you can retrieve the pictures on another computer. But the pictures won't display on the iPod.

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?

You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck!

How to add audio track to Final Cut Express

Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

How do I make titles in Final Cut Express HD

How do I make titles in Final Cut Express HD?

Effects > Video Generators > Text -or-
Effects > Video Generators > Boris
Select the kind of title you want, drag it to the Viewer. Click the Controls tab in the Viewer. Enter your titles, tweak your settings (color, font, etc). Then move the clip to your sequence. In general, Boris Title 3D and Title Crawl work best.
If you want the titles to appear over video, place the title clip(s) on a track that is higher than your video.

How can I add support for JPEG 2000 to Final Cut Express?

How can I add support for JPEG 2000 to Final Cut Express 4? I need to export an .mov file in the JPEG2000 format but it is not available as a quicktime export option. Is this something that I can add via a quicktime .component? Would appreciate any insight anyone might have... Thank you.

I believe you need to purchase the QuickTime Pro key ($29.99 USD). Once you enter the registration number in System Preferences for QuickTime Player 7, it 'unlocks' several export features, including JPEG2000.
See:
http://support.apple.com/kb/SP521
http://support.apple.com/kb/HT3820
http://support.apple.com/kb/HT2240
http://store.apple.com/us/product/D3380Z/A/quicktime-7-pro-for-mac-os-x?fnode=62
-DH

How do I export a final cut express movie in both PAL & NTSC formats?

I am wanting to provide both a NTSC and PAL verion of a movie onto a DVD, how can I do this using final cut express?

Ok, I have successfully converted a DV-NTSC video to DV-PAL using Nattress Standards Conversion in FCE. The resulting output file (a self-contained QT movie) verfied as PAL in QuickTime movie inspector, 720x576 at 25fps and it plays perfectly, the video looks great, and the sound is in sync.
I had to figure out a workaround for one step in the documentation (Graeme uses an FCPro feature called 'nest items' that doesn't exist in FCExpress. I got around that by manually creating a second PAL sequence instead - see below).
If you're starting with an NTSC video, the basic procedure I used is this:
1 - create a PAL sequence and place the NTSC clip in that sequence (yes, that's right)
2 - create a second PAL sequence (add the word NEST to the name so you can tell which sequence is which)
3 - nest the first PAL sequence in the second PAL sequence
4 - open the second PAL sequence (the NEST) in the viewer by Control-clicking its timeline and select +Open in Viewer+
5 - apply the G Converter filter to the NEST (which is now open in the Viewer)
6 - click the filters tab in the Viewer so you can see the G Converter filter
7 - drag the +original NTSC clip+ from the Browser to the +Source Clip well+ in the filter
8 - verify that the other G Converter settings are what you need, especially that you have checked "Nested", "High Quality" and "Source is NTSC-DV" and that the convert setting is NTSC->PAL (these are the defaults, but you should verify them anyway)
9 - render the NEST sequence ... +this may take as long or longer than the length in time of your sequence+
10 - export the NEST sequence as a self-contained QT movie ... which will now be a PAL movie
One other note, the Standards Conversion filters need to be copied to the +Library > Application Support > Final Cut Express Support > Plugins+ folder (not the Final Cut Pro Support > Plugins folder as specified in the documentation)
If you are going to try this with your project, I suggest the following:
1 - edit your movie in an NTSC sequence. After completing all your edits (when you are done editing) export it as a +self-contained QT movie+ (it will be an NTSC movie)
2 - re-import the exported NTSC movie back into FCE (it will now be your complete movie as one large clip)
3 - follow the instructions above for using the G Converter filter to create the PAL version of your movie (using the re-imported movie as the only clip you will put in the first PAL sequence, and in the Source Clip well in the converter filter.)
You can use your first export (the self-contained NTSC movie) to create your NTSC DVDs; and the second export (the self-contained PAL movie) to create your PAL DVDs.

I NEED HELP! How do you do this in Final Cut Express 4?

Hey guys,
I am a pretty amateur video editor, and I have been using Final Cut Express 4 for some time now for my YouTube drum covers. What I mostly use it for is for audio and video syncing and some small effects.
My question is, how the **** do you make a small video appear as a window over another video? I know that is not the best way to explain it, but I really don't know. If you don't know what I mean, I will post a screen shot of an example. Also, if there's a YouTube tutorial on how to do that that you have seen, that would be even more helpful.
I'm looking forward to your replies. Thanks for the help!
Message was edited by: DrummerGS
Message was edited by: DrummerGS

I will ditto what skalicki said, and add that you can graphically change the little clip's position by clicking on the Viewer's 'Center' button (has a plus sign in it) in the Motion tab, and then clicking in the Canvas where you want (you can drag it around if you haven't unclicked yet).
You can also add a border effect to that clip, which I would recommend for vids like the one in the screenshot you posted; the inset blends in too much with the underlying clip and seems undefined...

How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

Similar Messages

Maybe you are looking for