How do I add a wifi repeater to my network

I am trying to add a repeater but the instructions are written for a PC

Amazon will have the manufacturers info. If not, you will need to call Amazon customer service.

Similar Messages

HT4623 How do I add my wife's iPhone to our "find my phone account"?

How do I add my wife iPhone tommy"find my phone"app?

If your wife has here own Apple ID/Password for iCloud...she should...you merely launch the Find My Phone app, & sign in using her Appkle ID/Password. That's all you have to do.

How can i add the airport expres to my network, how can i add the airport expres to my network, how can i add the airport expres to my network

how can i add the airport expres to my network, how can i add the airport expres to my network, how can i add the airport expres to my network

elroiew wrote:
how can i add the airport expres to my network,
Best way for the first set up is to connect the Express via LAN cable to a computer.
Then enter the setup of the express and choose "Join a existing network"
After the setup is done, remove cable and you will see the Express in the Airport Utility
Lupunus

How do i add my wifes icloud account to my mac

my wifee just bought a new iphone 5s. How do I add her Icloud account to our mac?

Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers. I have made substantial changes to improve readability and syntax.

How do I add my wife's account to my itunes match

I have added my iphone and iPad without issue,
But cant seem to add my wifes without changing the itunes account login name to mine

On the iPhone you sign in with the same Apple ID that was used to purchase iTunes Match. Go to Settings > iTunes and App Stores.

HT201365 How do I add my wife's iPhone on the find my iPhone

I want add my wife's phone in the fund my iPhone

go to settings, icloud, and tap on Find My iPhone

HT204074 how do I add my wife's ipad to my itunes account?

I think my wife has her own itunes account, but she never has actually accessed itunes or set up a credit card on file. Is there a way to add her ipad to my account so I can more easily put the tv shows that I have already purchased onto her ipad? When I attach her ipad and click on her ipad, I do not have access to the same tv shows that I do when I attach my own ipad. Thank you.

Hi! You can go to Setting >iTunes and App Store > tap on apple ID > tap on sign out and then sign in with your account on your wife iPad.
You can also add your accounts (your's and your wife's) to iTunes (on a pc or Mac) and authorize them with that iTunes and then sync iPads with that iTunes.

How do I add a second TimeCapsule to a network?

A friend has a TimeCapsule in his business which is a few hundred feet away from his home. He has an old 500gb TimeCapsule that he would like to use as a WiFi router at home, so he ran cat-5 cable over there thinking he could just plug in the old TC and it would boot up. The other end of the cat-5 cable is plugged into one of the three ethernet ports on the back of the main TC, which is a dual band 1tb version that has been running just fine. Only when we try to get the new TC to boot up, nothing happens. The blinking light on the front stays yellow, and it doesn't appear in AirPort Utility so I can configure it.
Now I've brought the old TC home and hooked it up to my home network which is a similar 1tb TC. I have a printer plugged into one of the ethernet ports and the old TC plugged into the last one. The green lights on the back of my 1tb TC do not blink, which makes me think the old TC isn't recognized. All I get is a blinking amber light.
Anyone have any thoughts about how to get this second TC working? And once it is working, will I have to repeat things to get it working again at the other location? Does the first TC need to be reconfigured to support a second TC?

Please plug the old TC directly into the computer by ethernet.. do not add it to the network.. before configuration. You are just making it hard for yourself.
Plug LAN port of TC to the computer.. no other connection on the TC.. no other connection like airport on the computer..
Press and hold the reset whilst restarting the TC.. you need all of your 3arms to do this.. or get a friend to power on at the wall. Keep holding for about 10sec and release the reset once the front led flashes rapidly. This is the full factory reset.
Then simply choose bridge mode in the airport utility.
If you run lion,, then download 5.6 utility.
http://support.apple.com/kb/DL1482
Bridge in on the internet tab connection sharing.
(On v6 utility it is under DHCP and NAT).
With the TC in bridge place it back onto the network. It will pick up an IP from the main router (your TC or the work TC) and simply act as a switch and WAP. Plus of course the network drive.
A Gen1 or Gen2 TC has very little time left.. the power supply will blow.. it is just a matter of when.
There is no setup needed for the main TC.
An ethernet several hundred feet long.. is a magnet for lightning.. stray earth issues.. esp if it is not buried properly in conduit.
If it was me.. I would put a cheap switch at each end.. as a first step protection of the much more expensive TC.. an item you can afford to lose if the untoward should happen. Even so bad things can still happen. Wireless or fibre are the right way.. Long range ethernet is possible.
Nothing wrong with just using switches.. and 100M or less of good quality ethernet.. but be warned.

How do I add a computer to an existing network?

I have an old g5 tower connected to an airport extreme that is connected to a cable modem (time Warner). I need to add an additional g5 tower in there somehow. Not sure how to do this. Tcp/ip settings?

Well, you need to either:
Purchase a router.
Purchase another Ethernet adapter, and turn on Internet Sharing over Ethernet.
Purchase a WiFi card, and turn on Internet Sharing over Ethernet.

How can I add a new WLC on my network

Hi there,
I have a WLC4404(v4.0.219.0) and several APs on my network.
Those APs are belonged to a couple of vlans.
I planed to add a new WLC4404(v5.0.148.0) on same network with a old one.
I configured the new WLC4404 as a primary controller of the APs and the old on as a secondary.
I noticed some APs could be registered only on same vlan with the managemnet interface of the WLC.
How can I register the APs on different VLANs with Mgmt. of the WLC?
Let me know if you have a any idea.
Thanks
Jongkwan Lee

Well since the ap's only know of the existing WLC, the only way they will join, is if you remove the existing wlc and let the ap's find the new wlc. When you configure the mobility group, that info is pushed to the ap, so that it knows of the new wlc. This way you can set the primary ap to the new one and the second wlc to the existing wlc.... make sure ap fallback is enabled so that the ap will try to join the new wlc. If you still have issues, I would console into the ap and capture the log when you faile the existing wlc.

How do I add Macbook air to my windows network and how do I connect to windows shares from said Macbook?

Finally, I have a "clued in" boss who wanted a Macbook air. I have it, and I can get to the internet by supplying the correct proxy credentials. My issue is trying to connect him to windows shares on my network? I know how to do this cold for adding a PC, But need some 101 on how to take this awesome macbook air and add it to the domain and how to get connected to various shares within my DOMAIN. as well as use network printers (I assume that is pretty easy). . . I should add that I can ping the servers in question, I am just not familiar with how to connect to them via Mac. . .I am sure this is laughably easy, I am the king of making things difficult, I swear!
Thanks for any and all help as usual!!
Dave

Which os do you have?
Check Apple's Knowledge Base for Printer Troubleshooting solutions and suggestions for your particular os.

How do I add a password to my wireless network

Hello,
First time posting to the board. So, in advance, thanks for you time and help. I am a computer idiot..not proud just realistic. I have read other posts and I just get lost in them as I do not have a strong working knwledge of computer knowledge. So, after reading on the linksys help pages, I have become even more confused. Basically what I need help with is just adding a password to my wireless network so the laptops in my house are the only ones that can use it. Probably a very basic question, but any help would be greatly welcomed.
Thanks,
Jeff

To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.

How do I add another computer to my wireless network

My brother from Calgary is visiting me with his older MAC book Pro and we cannot seem to get him set up on my wireless network. I am using DLink wireless router with Airport.

Hi Brenda,
Can his Mac "see" your network?

How do I add a password to an existing Computer-to-Computer (ad-hoc) network?

I have just created a computer-to-computer (ad-hoc) network but accidently missed the step to add a password to restrict access to the network. I cannot see any options to edit or manually manage the 'device' network.
How do I add a password or delete the network?

Use AirPort Admin Utility to enable wireless encryption on the one called "Main". Use WPA2 or WPA (with a non-dictionary password) if all of your equipment supports it.
Configure the 2nd AirPort Express (AX) [formerly "Remote"] to join the wireless network provided by the first one. Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

How can I add a field to a Repeating Frame in the body of a 9i Report

How can I add a field to a Repeating Frame in the body of an Oracle 9i Report whose source is in a higher group?
I want to change an Oracle 9i report. The report has no header or trailer but only a body. The body has the parent frame fields & a repeating frame with four fields, A, B, C & D. They all seem to be in one group. I want to add another field E to the repeating frame whose source is from the 'header'.
I added the field & created a boiler plate & then added the new field, E to the original group A, B, C & D. In the Property Inspector for the field, I pointed the source to the source column in the main query. However, when I run the report, I receive the error "Invalid body size". Some notes on Metalink indicate that this could be due to margins being out of the printable area.
Moreover, after making the changes & after having unsuccessfully run the report, when I try to open the Page Layout for the report, I get no details.
Thanks,

Hi,
i also got same query can u pls tell me elaborately, if u can can u pls send some code.
Thanks & Regards
Jagadeeshwar.B

How do I add a wifi repeater to my network

Similar Messages

Maybe you are looking for