How do I add an effect to a SmartShape on hover?

How do I add an effect to a smartshape on hover. For example, I've created a green rectangle which is a smartshape and is being used as a button. I have two instances of this button on a slide and am trying to do the following:
1) SmartShape A (Green rectangle) = On hover, I want this green rectangle to change it's fill color to blue.
2) SmartShape B (Green rectangle) = On hover, I want this rectangle to have a 4px yellow border (the original had no border, i.e. stroke width =0)
How would I do this without using additional objects?
For example, I don't want to have a duplicate of this smartshape (for each instance), that is used as a rollover shape which superimposes the original shape on hover -- I dont even know if that would work, sounds okay in theory though.
But it would be great if someone could help me with this, I've been struggling for some time to figure out this effect.
Thanks so much,
Sean

LOL, in the words of my father: Wish in one hand and spit in the other. See which one gets full faster!
It's the same issue I have with the title of an old book written by Napoleon Hill. Its name is "Think and Grow Rich". It's missing a word! *ACT*. Nobody just thinks and grows rich. Everyone must *ACT* on their thoughts.
So that's why I'm posting. Sure, it's great to state that you wish something were a certain way in Captivate or any other app. What you need to do is to tell Adobe about it. And you do that by visiting the link below and completing the wish form!
http://www.adobe.com/go/wish
Cheers... Rick

Similar Messages

  • 1. How do I add CSS effects to a certain element?

    How do I add CSS effects to a certain element?
    There are several effects (like customized hover effects) that I could with CSS. I want to know how do I add the CSS effects for a certain element/object from within Edge animate.

    The way to add css in general is
    sym.$('element').css({
    'Property':'value',
    'Property':'value',
    'Property':'value'

  • How do you add video effects-slow motion

    Not real happy with 08 over previous versions but I would like to gain back some of the functionality that I regularly used. How do I add special effects, such as slow motion to a video clip or a portion of a video clip.

    How do you do it IMovie HD in Ilife 08?
    Both applications can be run on the same computer. Use whichever application best serves your needs. If you need a lot of plug-in effects, use HD. If few or nor effects other than standard transitions and titles are required and speed is paramount, then use iMovie '08. If you like being innovative and want to try your hand at creating your own effects, use iMovie '08 and learn how perform pre- and post-edits to create your own fast motion, slow motion, stop motion, pseudo time lapse, still framed, backgrounded, blended, layered, picture-in-picture, etc. that may "tickle your fancy."

  • How do you add multiple effects to the same clip

    How do you had multiple effects to the same clip. I have tried for hours
    I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
    anyone please.

    Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
    Aged Movie should already have a bit of a sepia tone.
    If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
    Note: Thanks to Jeff Carlson of MacWorld for this tip.
    If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
    If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

  • How do you add a effect to a certain part of a track, not the whole track itself, how do you add a effect to a certain part of a track, not the whole track itself, how do you add a effect to a certain part of a track, not the whole track itself

    How can i add echo to vocals only on certain parts of the vocal without it effecting the whole vocal track itself?

    You can only do this in newer versions of Garageband (5 & 6). 
    Here's a brief tutorial::
    http://audio.tutsplus.com/tutorials/production/how-to-give-life-to-garageband-tu nes-with-automation/
    Or, you can simply do an old-fashioned volume cross-fade between identical tracks:
    http://www.thegaragedoor.com/tutorials/automation.html

  • How do I add lightning effects to movies?  I know they were in 12 but I can't find them in adobe elements 13

    I am trying to add this effect and can't locate it.

    gikddragib15
    Premiere Elements 13/13.1 Windows 7, 8, or 8.1 64 bit
    Expert workspace
    fx Effects Tab at bottom of Expert workspace
    Advanced Effects
    Lighting Effects
    And then, to edit the effect, see Applied Effects Tab/Applied Effects Palette/Lighting Effects Panel expanded.
    Also, see Adjust Tab/Adjustments Palette/Lighting Panel expanded (including More button options....in the screenshot below, I have clicked on More so that is why you see Less instead of More button)
    The above Lighting effects are in 12/12.1 as well as 13/13.1.
    Please let us know if you find Lighting in the places cited above.
    Thank you.
    ATR

  • How can I add vocal effects other than the 9 Voice options? (I can't shift pitch)

    Hello!
    I am making the switch from PC and am just trying to lower the pitch of a vocal track by at least an octave; I just got a MBP last week and am running GB 10.0.2. I can't find any info on similar problems that is helpful; most solutions I've come across show that when the track is selected, there should be a pitch shift bar with a sliding button, but I do not have that. I read a lot of people saying something about the track being purple or not, but I'm not sure if that's relative to the version I have or if that has anything to do with what's happening. When I select the track, in the little area toward the lower left when "Track" is selected, (what is that space called?) where the pitch shift option is for other people, I only have a sliding bar for Pitch Correction, and a checkbox for Limit to Key and Enable Flex. When "Region" is selected, it just shows the name of the region and there are no options. Another question I have is how to change the pitch of midi sounds? When the keyboard is open on the screen I have tried moving the little octave shifter, but it assigns the sounds that are on the keyboard at different locations if I move it, so it changes the sound completely. A couple of them shift one octave up or down, but there are no actual controls..
    I'm mostly just dabbling with EDM/trap/Hiphop tracks at the moment, but am confused about whether or not there are other vocal effects and controls other than the preset Voice options in the instrument area (Bright vocal, Classic vocal, compressed vocal, Edge vocal, etc.)? I'm not going to be using GB forever, but are there not any other options like for current rap/trap production (phaser, balance, EQ, auto tune, choppers, actual voice altering effects, etc.) [preferably without buying extra things]? And not only vocals, but editing effects for all sounds.. If so, how do I get to them? And if not I know I should at least be able to lower or raise the pitch of a vocal recording... There are some pretty legit electronic instruments that are exactly the kind of sound I'm going for so I was surprised to not see an equally simple to access vocal effects board or something. Any additional tips for a n00b electronic music producer would also be greatly appreciated! Thank you for any help!

    In GarageBand 10 you can no longer change a track with an audio file to a "purple" audio recording, as it has been possible in GarageBand '11.
    Even, if you can make the transpose slider visible by enlarging the the track editor panel, the slider will be disabled.
    What you can do however, is either add an AuPItch filter  from the audioUnit panel or to convert your audio file to loop and to admit from the Loop Browser.
    In the new GarageBand you add the AuPitch filter from the Smart Controls.
    Enlarge the SmartControl panel by dragging the dividing line upwards, until you see the Audio Units brick, then add an Apple Audio Unit and set it to AuPitch.
    Or create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library". You need to trim the filet an exact number of measures.
    Set the current key and tempo, name the loop, and save the loop. Make sure, that one-shot loop is not enabled.
    Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
    You will be able to transpose the sample  like any regular loop.

  • How do I add this effect to a rotated video [pic]

    I have a rotated video which now has black bars on either side which looks like so:
    How do I make it so the black bars on the sides are the right & left sides of the actual video appearing blurred?
    Like this:
    I don’t want to have to zoom to fit. Thanks!

    There are some advantages to using two different background images as shooternz pointed out.
    Some footage would benefit by not scaling it up and just reversing it on each side, just for one example.
    To do that you could put one clip on track one. Then flip it using the Horizontal Flip effect and blur it up. Take that and using the position parameters of the Motion effect, slide it over to the left so that it will just barely be slightly covered by the top clip in the middle.
    On track two, flip another copy, blur it, and scoot it off to the right.
    On track three, put on the original.
    Having said that, now I feel compelled to actually do it. I just shot a picture of some flowers with my cell phone for this purpose. Note that one side has more blooms than the other. So in the image below, you just catch a hint of the larger blooms next to the larger blooms and the smaller next to the smaller, and you should be able to tell, if you look closely that they are reversed.
    Now, of course, deciding if you want to do this depends entirely on the footage.

  • I have Garage Band for my IPad. I would like to add a "delay" effect to my music, but I do not see that effect available. How can I add it to the software? Thank you.

    Hello all,
    I have Garage Band on my Ipad Mini and I notice that it does not have a "delay effect" that can be added to my music. There are other effects, but no delay, which is the most important one for me. How can I add this effect?  Thank you.

    There are not many effects available in GarageBand on the iPad. You can add reverb and echo to the Master Track, but that's it.
    See the User Guide:  http://help.apple.com/garageband/ipad/1.4/index.html#chs175dc411

  • How to add voice effects to a video

    how can i add voice effects to a video!

    You need to supply much more information.
    For example: Which video app are you using?
    In which format is the video?
    I presume you want to add the effects post production, so to speak, not live.

  • How to add binding effect in indesign?

    How can you add binding effects to an InDesign document so it looks like a book or notebook when converted to a pdf?
    Below is an example
    http://blogs.adobe.com/indesigndocs/files/indesigndocs/SWF.jpg

    What plugin? The plugin manufacturer should provide directions or an installer.

  • Add multiple effects to a title and to a video

    I have an edited video and inserted a title before the video starts. I would like to have the title zoom and while zooming, fade in. I apply the zoom to the begining of the title on my timeline, edit the duration and the start and end size then try to add a fade but the fade overwrites the zoom. On all the videos I found, they drag and drop the effects onto the clips on the timeline (I have to add them to either the front or back) then it appears on the Effect Controls under Video Effects. When I do it, I do not see the effect under that, I can only see the effect options when I click on the effect on the time line.
    I have tried the same thing to the video itself and can only add one effect to each clip.
    What am I doing wrong? How can I add multiple effects to things on my timeline?

    Here is a +1 for Jim's suggestion to look into Keyframing the Fixed Effect>Motion>Scale, to create your Zoom.
    You could well explore Keyframing another Fixed Effect>Opacity, to have more control over your Fade-In too.
    Good luck,
    Hunt

  • How do I add a video effect to multiple clips in my timeline at once?

    How do I add a video effect to multiple clips in my timeline at once?

    or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

  • How do i add a .pbk effect from adobe in adobe extension manager CS5

    *THIS IS FOR PHOTOSHOP CS5 ON A MAC*
    Does anyone know how to add an effect like the droste effect which is a .pbk file into a pixel bender file which is a .mxp file for the Adobe Extension Manager CS5. I have yet to find a solution for this problem but all help is appreciated. Thank you.

    First update to the newest Illustrator version if needed. The SVG files you create with Adobe Shape CC are added to your Libraries and are accessible from many desktop applications. From Illustrator create a new document. Open the Libraries panel and right-click on the Shape file and choose Use in document. Then click on the Illustrator file to place the Shape. Save the file to your Creative Cloud Files folder and it will sync up to the Files section at https://assets.adobe.com.
    Shape added to Illustrator file:
    Viewing the file from the Files section:

  • How do I add Green screen effects in iMovie 10.0.6

    I have been working on a project and have green screen elements as well as pr keyed elements that I want to add to my film but am unable to figure out ow to do it. How do I add Green screen effects in iMovie 10.0.6?

    Have a look at http://help.apple.com/imovie/mac/10.0/#mov82da1338a
    Geoff.

Maybe you are looking for