How do I add delay to rear speake

I am using SB Audigy with front and rear channel, so called quadraphonic configuration. My speakers are positioned so that front speakers are much further away from listening point than rear speakers. So to eliminate the echo-effect caused by front speakers I should add some delay to the rear speakers.
How do I actually do this? I cannot adjust the delay from my A/V receiver, because it is very old. Is there a program or a driver for this purpose? I heard that kX Project has 3rd party drivers which allow this, but I wouldn't like to lose EAX effects from games.
Any help would be much appreciated!

AFAIK, ipfw doesn't have dynamic rules.  Alternatives: some sort of an add-on filter (and I haven't tried that one on OS X!) or fail2ban.  Move the ssh port somewhere weird, an approach which will confound many of the gremlins.  Maybe port knocking.  Or move to a VPN.  Delaying the ssh connections won't help against a distributed ssh brute-force attack, either.  There's a reasonable general (non-OS X) write-up here.  Personally, I find a gateway-based VPN server is usually easier to deal with, and it keeps the OS X logs from getting filled with noise.

Similar Messages

  • I have Garage Band for my IPad. I would like to add a "delay" effect to my music, but I do not see that effect available. How can I add it to the software? Thank you.

    Hello all,
    I have Garage Band on my Ipad Mini and I notice that it does not have a "delay effect" that can be added to my music. There are other effects, but no delay, which is the most important one for me. How can I add this effect?  Thank you.

    There are not many effects available in GarageBand on the iPad. You can add reverb and echo to the Master Track, but that's it.
    See the User Guide:  http://help.apple.com/garageband/ipad/1.4/index.html#chs175dc411

  • How to add delay in media player?

    I want to play a video in my GUI and I want to add some delay so their is any method to add delay before the the player start to play a video.

    The following code would wait 10 seconds and then start a player...
    SwingUtilities.invokeLater(new Runnable() {
        public run() {
            try {
                player.realize();
                player.prefetch();
                Thread.sleep(10000);
                player.start();
            catch(Exception e) {
                e.printStackTrace();
    });

  • How to add  delay logic for 30 msec?

    Hi,
    I need to add delay logic to my program, which has to wait for 30 msec, for creating spool requests.
    plz help me

    HI Friend,
    You can use WAIT UP TO n seconds to delay.
    Check out this link:
    http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/Utilities/ABAPReference/ABAPWAIT.htm
    Regards,
    Chandra Sekhar

  • How can i add Chinese language support to my N97

    Hi all of you!!
    i hope can some body help me
    i work in china and i bought my mobile from Dubai and it is just support Arabic and English
    so how can i add chinese support to my mobile?? i don`t want change product code beause i want arabic languge also
    just can review chinese websites and read chinese messages is enough, i know can throw change the the font but.....
    http://forum.dailymobile.se/index.php?PHPSESSID=m6​1ggc373rem98jjmbbnri56r4&topic=15893.0
    i already try above subject but the font is very ugly and make problems for my mobile and switch off by it is self many times
    before i have Nokia N82 and i was install Psiloc Crystal Chinese on it and by this program can read and write chinese but until now no have such program for N97
    so how can one mobile same N97 (small laptop) not support some languages????
    and how can one company same NOKIA don`t give such this serveice for the customers,
    need charge is okbut need some thing usefull
    thanks all and i hope can find some body help me

    Dear I know that you answer me but it is not Solution, right or no? waiting for another
    also why it is impossible with out third-party software? change mobile font can!!!!
    did you visit this link http://forum.dailymobile.se/index.php?PHPSESSID=m6​1ggc373rem98jjmbbnri56r4&topic=15893.0
    i try it but have some mistakes, but can support chinese and arabic in same time
    also you speak as third-party software full the market and internet
    give me one third-party software name and i will be very happy
    Dear i love nokia and i will not change nokia to others but i can see around me such as IPhone, it is support most of languages together,
    thank you any way, now i know nokia support discussions is useless
    拜拜

  • How do I add additional pages to a book?

    How do I add additional pages to a book?

    Just below the thumbnails of the existing book pages is a + button. Press this and the pop-up menu "speaks for itself".

  • HT201269 how do you add a device to your i tunes account.  I have entered my info but it is not showing up

    restored the from from back up but no apps will show up.  go to the app and it does not show any purchased apps.  all the information for the itunes store is correct and the icloud.  I log in and looked in the account and my device is not sowing up.  How do I add it to my account.

    I cant find the bank.  How do I speak to someone within ITunes about this.  If they used what was left of a gift card there must be someone I can contact?  Help

  • Having Problem With Inspire 5.1 5300 rear speaker...

    After using my inspire 5.1 5300 for few year... right now im having problem with my rear speaker... just one channel was unable to start... Anyone know about repairing for speaker ? I Have try to switch to other channel it seem that just that rear speaker was unable to start... all should be ok... week before i still hearing sound from that rear speaker... but now it was unable to start. Anyone Have Any Idea Please Tell Me. Thank You

    Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly.  It needs to be in an editing codec if you want FCP 5 to work with it.
    Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all. 
    The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence.  This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with.  So delete SEQUENCE 1 and create a new sequence:
    This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

  • How do I add a preloader in Captivate 5

    Hi
    I have published a project as a swf file and my colleague has setup a link to the fine in Zendesk. When you click to play the movie there is a fairly long delay till the swf loads. How do I add a preloading icon that shows something is loading and how can I start the movie before the whole project is loaded.
    Thanks

    Hi there
    Look in Edit > Preferences > Project > Start and End.
    Cheers... Rick

  • Delete records from multiple tables and add delay in execution

    Dear All,
    My Database is Oracle 11gR2 on Linux.
    I have to schedule delete in 5 tables. For this i will write a procedure with delete queries and schedule the procedure to run daily in night.
    I want to give delay in the execution of delete queries within procedure? How can i add this functionality within a procedure?
    I don't want to lock the tables as other queries may be accessing the same table meanwhile.
    Looking for your help.
    Regards,
    Imran

    Duplicate thread - see https://forums.oracle.com/thread/2553380 for answer.

  • DDL or DTS = no sound out of rear speak

    I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

    bigjohns97 wrote:
    Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
    MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
    On the sound blaster the following happens
    MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
    Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
    I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • Only my rear speaker have sound with my sound blaster X-FI Xtreme Audio

    How do i set up my sound card to have full 5. surround sound with my Harman Kardon AVR. I plugged my optic cable in my sound card out to my AVR in, then only my rear speaker work. Please help me.

    when i used the test it show the sound i get on my rear speakers as front speaker sound on the image.

  • Both rear output is heard through left rear speaker, none in right rear spea

    I have a Soundblaster Audigy card with Creative Insire 5. 5200 Speakers. The problem I am having is no sound is heard from the right rear speaker channel. I know the speaker works, as I have switched them around to check (they all work). Doing the speaker test, all speakers are heard in order, and when it gets to the left rear speaker, it plays both the right and left rear message. In other words, both my right and left rear sounds are playing on the left rear speaker, with no sound out of the right rear speaker. I have all of the updated drivers for the product. I don't know if it is hardware or software related, or if it is the speaker system, but I do know all the speakers work. I am showing no problems (even hidden) in the hardware manager. Any help or clues would be appreciated

    Bump !!?Cause I am having this exact same problem with my xf-i (XtremeMusic) and my logitech Z-5500 Speakers. I have them connected using the 3 analog wires and yes, they are correctly plugged in. The Logitech Control Pod is set with the switch in the rear to the 6 channel position and the Pod is listed as the source being 'Direct' and '6 Channel' when I try this. When I run the speaker test, it fails the right rear speaker (no sound) and when I try the left rear, the sound comes out of both rear speakers. I have also tried the THX speaker setup settings and they do the same thing on the test (set for 5.). Also, I have all the settings on the Entertainment module set to push the audio to the External Decoder (for everything, since the 5500's can do this, decode DTS and Dolby). Regardless, it should at least be able to pass the Speaker Test. I did have an Audigy card installed, but I removed it before installing this card. The only thing I had installed for the Audigy was the drivers and there was nothing listed in 'add/remove' to remove them. I had none of the apps installed (cause I knew the xf-i was coming)?I sent a email to creative and have heard nothing (been a day, I know they say -2 days, but come on, hire people !!). Can someone out there please help !
    !!! Thank alot?Dr-

  • How do you add folders in hotmail on iPad

    How do you add hotmail folders on iPad

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    One of the ways to get around the limitations of POP mail accounts on your iPad is to activate an iCloud account, which is not POP mail, but IMAP mail. Then go into the configuration of your POP mail account and have the account sutomatically forward your email to the iCloud account.
    After you have your iCloud email account it is easy to add and delete email folders.
    Just open the Mail app and tap on iCloud under Accounts on the left of the screen.
    Tap Edit at the top of the screen.
    Tap New Mailbox at the bottom of the screen.
    Name your new Folder and tap Save.
    http://ipadhelp.com/ipad-help/how-to-add-folders-to-email-on-the-ipad/

Maybe you are looking for