How do I add expanding content on form in acrobat adobe 9 pro extended?

I have a form in acrobat adobe 9 pro extended. I have 2 questions: 1) Can you make the main content of the form be continual (being it may or may not go into multiple pages) and 2) If the form goes into multiple pages, can signature area only appear on final page?
The form designer is Adobe LiveCycle Designer.
Thanks for any help given.
Message was edited by: Karen Wermager

On a Mac with Mavericks (or Yosemite) installed on it you don't add them to iTunes, that is only used as a tool for syncing your books to the iBooks app on your iOS devices, iTunes isn't used for managing them.
For the books that are compatible with iBooks (you probably won't be able to copy the Mobi files into it) then you can add them to the iBooks app on your Mac either via the File > Add To Library menu option within the app, or by dragging and dropping them onto it.
If you connect your iPad to your Mac's iTunes they should then show on its Books tab for selecting and syncing to the iBooks app on the iPad
For the mobi book, you will need an app on your iPad that supports more books e.g. the Kindle app.
For Kindle, and possibly other mobi apps, you can add books to the app by selecting the iPad's Apps tab, scroll down the right-hand side of the screen to the file sharing section, select the app that you want to copy the book to, and add it to the app.

Similar Messages

How do I add spoken content in mp3 form to Audiobooks?

How do I add spoken content in mp3 form to Audiobooks?
I have tried drop & drag, adding a folder ect.
It always goes into the music folder. I have unchecked the box in advanced options, as well.
Thank you any suggestions.
PB

See the FAQ at this site.
http://aldoblog.com/audiobooks/

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

How can I add the content from a iPod Nano to a new iTunes account

how can I add the content from a iPod Nano to a new iTunes account

On the computer in iTunes log into her Apple ID and then see if recent purchases are shown by clicking on her name in iTunes, entering her password and then selecting the option. If there is nothing there then she bought that music with a different Apple ID.
You can use TouchCopy to move all the songs on the iPod to the computer. Then try to play one of the purchase songs and it should show the account used to purchase it and ask for the password.

HT1800 How can I add a Epson Stylus SX445w to my mac Book Pro this is the second one I've tried and failing miserably...it should be so simple...spoken to the help line at Epson and they say it's down to Apple !! Somebody please help me

How can I add a Epson Stylus SX445w to my Mac Book Pro
This is the second one I've tried and failing miserably...it should be so simple...I've installed poken to the help line at Epson and they say it's down to Apple !! Somebody please help me

Yes I did everything that I was instructed to do!
Cheers
Joyce

How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

Hi there,
I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
Any established hardware/convertor to recommend ?
Thanks

Ryan,
For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
Good luck,
Hunt

How to crop pages using Adobe LiveCycle ES2 PDF Generator and Acrobat 9.2 Pro Extended

Hi all,
I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
Any input about this is highly appreciated.
Kind Regards,
Raf
Raf Snijders

Hi all,
I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
Any input about this is highly appreciated.
Kind Regards,
Raf
Raf Snijders

How do I add borders to the form fields in the checkout page of my BC shop?

I am setting up my Shop for my website www.myartscreative.com. So far, so good. I am testing out going through the steps of ordering a copy of my sketch book, adding the appropriate shipping, etc. However, I notice when testing the checkout page, most of the fields do not have a border around them which makes it hard to see where to fill in the pertinent info. How do I add a border or fill (or both) the form fields so my customer can easily see where to type in their information? Here is the link to my shop's "check out page".

Ok, got it! So, I kind of figured it out by going into the Develop tab in the BC Admin and going into the modulestylesheets.css and modifying that. Check the link above again and you will now see the borders around the input fields. Probably no big deal to you pro's out there, but I am a total newbie up to this point. Thanks again!

How can we add a checkbox in form (Scripts)

Hello Experts,
i want to add a checkbox in the form. how can v add a check box in the form. i tried with sap scripts symbols like sym_checkbox but it's not working.
and i can print a small box by using Box statement. but i need exactly a check box. how can v create it in scripts.
thanks in advance.

Hi,
Please refer the links,
Check Box With Tick Mark on Sap Script
putting tick mark into check box in smartform
Regards,
Hema.
Reward points if it is useful.

How do I add music from a music cd on a MacBook Pro? Up until this morning I got a window that asked me if I wanted to record or play the cd I just inserted. Now that window no longer appears. Any suggestions on how to rectify this?

How do I record music from a music cd to my MacBook Pro? Up until this morning I would get a pop up window that asked if I wanted to play or record the disc I just put in. That screen no longer appears - a disk starts to play. I can stop the auto play but how do I add the music to my existing music collection?
Thanks

Do you mean "how do you rip a CD to iTunes?" If so, just insert the CD into the optical drive of the MBP, launch iTunes, edit the ID3 tags to show what you want, then click the "import" button in the lower right corner of the window.

How do I add table to a form

I am creating a form with mostly single selection fields. I need to add a table (a simple two columns and several rows) at the end of the form. How do I do this?

Your best bet might be to use a Formatted Text for "Turnover" on top of your fields and then use caption on top for label positon.
OR you can have the Formatted text on the same line as your fields too
Hope this helps
Gen

How do I add XML content to existing FrameMaker Document

Hello,
I have an XML document that contains features of one item and I want to add data from it to FM document that shows those features. These features have been added to FM previously by copy-paste technology which isn't obviosly the fastest way and I have understood adding them automatically is possible.
I can read XML well and I can produce XSLT files to make another XML files, problem is that I'm a little beginner with FM and help files didn't show any good examples of this (or at least I didn't find). I tried to do some read/write rules, because it seemed to be the way how FM handles these things but they didn't work.
So shortly: XML file (data) + FM file (tables and such) = FM file which have XML data in its tables
I would appreciate any help, like pointing to right help files or such, thanks in advance.

The two main references you need are:
Developing Structured Applications with FrameMaker, Guide
Developing Structured Applications with FrameMaker, Reference
They used to ship with FrameMaker, but you can download them from the Adobe site. Check the Support section. I do not believe they are available for FrameMaker 10 yet, but they are for version 9. No matter your FramMaker version, almost any set will do.
Basically, you need an XSLT that will translate the XML structure into the structure you use in your FrameMaker files. You need a set of read/write rules (see the references above). FrameMaker uses read/write rules to specify how certain FrameMaker objects are to be translated from the XML. Such objects include tables, variables, and markers.
Then you need to create a structured application that specifies where the XSLT, the read/write rules, and your structured template are located on you system.Again, see the references.
Once all of the above is in place, you open the XML file from within FrameMaker. FrameMaker will ask you what structured application to use, which you pick from the dropdown list. It will then open the XML file, apply the XSLT transformation, and copy the result into your structured blank template. That process will likely list several errors, which you may or may not be able to ignore depending upon the resulting FrameMaker document. In my case, these are usually errors about missing graphics, which I already know are missing.
The result is ONE FrameMaker file. You can then copy and paste the information where ever you need it in your other documents. I am not sure whether you can import an XML file into an existing Framemaker document, much like a text inset. Maybe others will know.
Good luck,
Van

How to use ADD value in the form field

Hi all,
I want to add +44 code infront of the Tele no field.
How could wei achieve this?..
with regards
prabu

pre-pend the string with telephone number and display it

InfoPath 2010 - How to connect to another content type form from the current form with a click of a button?

I have two different form library forms for each different content type published to the same Form Library. I like to know if by a click of a button, if I could close the current form and jump to the next and vice versa? If so, what steps
would I need to take using OOB technology?
Thank you,
SRAEngineer

Hi Guru:
Thanks. However, the Views do not work in my case, as one form has different required fields than the other and set of fields also changes a bit for each form.
However, researching more I have been able to find the solution since I posted this request.
I will try to describe the Solution:
First I deployed both the forms to a SharePoint Form Library. Then I opened the template from the advanced settings and copied the URL from the top search box of IE.
Went back to the design view of the form, highlighted the writings/title of the form and right clicked to paste the hyperlink.
Quick published it again and now the hyperlink is working active/live in the deployed form as well and doing its job to get to the next form. I repeated the process to the other form to do a toggle.
Thank you for your input though.
Regards,
SRA
SRAEngineer

How do I add a content Type (PDF) to the Applications in Firefox preferences

When i Try to open/download a PDF file I get a blank new tab.
I checked the Applications Tab in preferences and I do not have PDF files in the Content type. No problem in downlodading/viewing PDF files from gmail.

Hello George,
This tutorial should step you through the basic process of configuring the device and connecting the thermocouple:
Tutorial: Connect Thermocouples to a Data Acquisition (DAQ) Device
http://www.ni.com/gettingstarted/setuphardware/dataacquisition/thermocouples.htm#Connecting a Thermocouple to Your Device
From there, there are a number of things you can do- I'd recommend taking a look at the LabVIEW shipping examples (Help>>Find Examples...) as well as the DAQmx getting started tutorials:
Getting Started with NI-DAQmx: Main Page
http://www.ni.com/white-paper/5434/en
At first glance, the 6363 you're using should have enough resolution to acquire usable data from a thermocouple- if you attempt reading raw voltages be sure that the acquisition range is configured for +/- 0.1V, though.
Regards,
Tom L.

How do I add expanding content on form in acrobat adobe 9 pro extended?

Similar Messages

Maybe you are looking for