How do I add files with same name to a folder

I have photos with the same name and want to add all to the same folder.  I dont want to have to manually change the nams is there an easy way to do this.  In windows I would have the option to keep both and it would change the extn of one of the files.  Gary

You have to do that manually, but why not set your camera to number photos sequentially?
However, there is an App called A Better Finder Rename available from the App Store that can rename files.
Or from here:
http://www.publicspace.net/ABetterFinderRename/

Similar Messages

  • How to mass-reindex files with same name but different file extensions

    (reposting cos I'm confused about if I posted in the proper place before. Please delete if it is a repost.)
    So I'm on a remote workflow. I pick all the raw data and convert it in two quality standards, one on 'high' with full specifications and one on 'low' so I can send 2gb instead of 80gb of files through the internet for me to work remotely on, and to speed up the overall work rhythm because files are lighter. All I need to do is to work at my home with the low quality files, send it back to the client's computer after finished, re-index all files in their high resolution twins and we are good to go to finish the product with highest quality possible. But both high and low quality files need to be the same extension, that I picked .mp4 for it is the standard for pretty much anything.
    The point is, if I want to go full mobile, I only have an old HP Pavillion notebook and I really need to work with a video codec that goes very easy on it. I can only think about some 16:9 DV format. But the point is, this format generates a different file extension than my .mp4 standard, and Premiere, to my knowledge, really can't reindex files using only the file name while ignoring the file extension. It really should. And I really need to know how.
    We also need to consider Premiere versions that allow themselves to be installed at x32 processors. My desktop is x64 and I really have no problem to work on these standards, the problem is, in my notebook I really can't.
    So, halp?

    i want to say it was added in cs7, which requires subscription, so in that case might as well be using latest version 8.  if you had to use an older version like cs5, you could still use h264 or low bitrate dnxhd/prores codecs inside a quicktime .mov file. that would allow you to have same file ext on both versions of files.

  • How to delete one existing file before uploading a file with same name?

    Hello everybody.
    I am uploading a file to Tomcat server. But, the problem is:
    i want to delete an existing file in the server, if i upload a fresh file with same name. In other words, "First check for the file with the same name in the server. If it exists, then delete existing file in the server and upload fresh one". If such file doesnot exist, then upload the file to server.
    I have given deleteonExit()
    but, for the first time when user is uploading, i want to check for the file with same name in the server.
    i am pasting the code here. please help:
    <!-- uploading the file -->
    <%
    String contentType = request.getContentType();
    if ((contentType != null) && (contentType.indexOf("multipart/form-data") >= 0))
    DataInputStream in = new DataInputStream(request.getInputStream());
    int formDataLength = request.getContentLength();
    byte dataBytes[] = new byte[formDataLength];
    int byteRead = 0;
    int totalBytesRead = 0;
    while (totalBytesRead < formDataLength)
    byteRead = in.read(dataBytes, totalBytesRead, formDataLength);
    totalBytesRead += byteRead;
    String contextRootPath = this.getServletContext().getRealPath("/");
    contextRootPath=contextRootPath.concat("uploaded");
    String file = new String(dataBytes);
    String saveFile = file.substring(file.indexOf("filename=\"") + 10);
    saveFile = saveFile.substring(0, saveFile.indexOf("\n"));
    saveFile = saveFile.substring(saveFile.lastIndexOf("\\") + 1,saveFile.indexOf("\""));
    // Create a directory; all ancestor directories must exist
    File outputFile = new File(contextRootPath, saveFile);
    var=outputFile.getPath();
    outputFile.createNewFile();
    int lastIndex = contentType.lastIndexOf("=");
    String boundary = contentType.substring(lastIndex + 1,contentType.length());
    int pos;
    pos = file.indexOf("filename=\"");
    pos = file.indexOf("\n", pos) + 1;
    pos = file.indexOf("\n", pos) + 1;
    pos = file.indexOf("\n", pos) + 1;
    int boundaryLocation = file.indexOf(boundary, pos) - 4;
    int startPos = ((file.substring(0, pos)).getBytes()).length;
    int endPos = ((file.substring(0, boundaryLocation)).getBytes()).length;
    FileOutputStream fileOut = new FileOutputStream(outputFile);
    fileOut.write(dataBytes, startPos, (endPos - startPos));
    fileOut.flush();
    fileOut.close();
    outputFile.deleteOnExit();
    %>Please help. Thanks for taking time.
    Regards,
    Ashvini

    Thank you MartinHilpert,
    I have one more doubt,
    I am uploading the file to one folder called "uploaded". Before uploading a fresh file, i want to delete all existing files in that folder. IS that possible ?? If yes, can you please tell me how to do that ??
    Regards, Thanks for your time.
    Ashlvini

  • How to separate two contact with same name

    Hi, anyone knows how to separate two contacts with same name in Contacts?  Actually they are two persons from two gmail contacts with same name but different contact numbers, different emails....etc, but Contacts assume they are same person and merge them as one!

    FG,
    In Lion, you have the File > Duplicate option. You will then have two copies of your document open, and the one on top will have the temporary filename "OriginalFileName copy", and your next responsibility is to File > Save (or Command-S) and rename the duplicate. At this point, you edit the copy's name, to perhaps ...copy 1, or whatever you wish. The document you had open when you initiated the File > Duplicate will still be there on your screen, waiting for you to Close it or continue editing.
    Jerry

  • While saving multiple attachments from mail, files with same name are added and not replaced

    While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

    Bjørn Larsen a écrit:
    Hi all
    Hope to get some help with Elements Organizer.
    I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
    That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
    Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
    Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
    Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
    I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
    However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
    You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

  • Script to find files with same names with in a folder and it sub folders.

    Looking for script to find files with same names with in a folder and it sub folders.

    Are you just looking to find if any two files underneath a folder have the same name?
    If you just want to know that a file named "whatever" exists in two folders, that's not too difficult, but you probably want to know the full path names.
    Here's one attempt:
    $ perl -MFile::Find -le 'find(\&w, "."); while (($n,$p)=each %file) {if(@{$p}>1){print join(" ",@{$p})}} sub w{push @{$file{$_}},$File::Find::name;}'That will print the pathnames on the same line of any files with the same name that appear anywhere underneath your current directory.
    It's a bit long for a "one-liner", but functional.
    Darren

  • Merging Log Files with same name

    Hello,
    I have log files with same name 00000000.jdb (because created at different machines). I would like to merge data stored in these two files.
    I tried below approaches which do not work:
    1. rename one of the files -> doesn't work as file header has file name info which doesn't match with renamed value
    2. db dump/load -> dump and load works without error. (i have to dump Entity related Database and Format related Database -- from -l option) However when i try to read the file, it gives error.
    Exception in thread "main" com.sleepycat.je.EnvironmentFailureException: (JE 5.0.103) Catalog could not be refreshed, may indicate corruption, errorFormatId=52 nFormats=51, . UNEXPECTED_EXCEPTION: Unexpected internal Exception, may have side effects.
    I am using EntityStore and thus Annotated Entities.
    Does any one has any insights?
    Thanks.

    Yuvaraj,
    As you discovered, it is not possible to use .jdb files from one environment in a different environment.  The .jdb files use an internal format with relationships between files that form the Btree.
    I'm glad to hear you were able to use DbDump and DbLoad successfully.
    --mark

  • Help - loading updated files with same name

    CS4
    When updating files with same name my CS4 automatically puts an extension _000
    I think it should ask me if I want to replace the existing file.  Is there a switch or setting that I need to change?
    Thanks.
    Alan

    Please find the solution in thread, http://forums.adobe.com/thread/707897?tstart=0.
    Hope this helps you.

  • Static Files with same name. How does apex determine which files to serve?

    Hello, I'm using apex 4.2.1.00.08 and I cannot figure out how apex manages the static files and cannot find any help in the docs (other that some high level UI description).
    The application is serving some file and I cannot find which one it is in any easy way.
    I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.
    There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen as
    SELECT *
    FROM wwv_flow_files
    WHERE flow_id = 0;
    and can apparently only be deleted using "SQL Commands" inside apex.
    the URL called is something like
    wwv_flow_file_mgr.get_file?p_security_group_id=13498126233076320&p_fname=myfile.css
    so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.
    apparently files linked to flow_id 0 have precedence over all the other files ...
    Thanks for clearing up a bit of "fog" on this issue.

    VC wrote:
    Go to that application > shared components > Static files you should see the file.the problem is that there are multiple files with that name, and that sometimes the file being served is linked to application "0" and it doesn't show in the "shared components" interface ...
    I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.Static files can be uploaded to apex with optionally associating with an application within that workspace.
    Files associated with an application are referenced using *#APP_IMAGES#*
    Files not associated with an application are referenced using *#WORKSPACE_IMAGES#*I referenced with #WORKSPACE_IMAGES#, but now I see that if I use #APP_IMAGES# the URL generated will also contain the application ID. This would help to discriminate between different files with the same name but linked to different applications ...
    There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen asWhy are you particularly interested in application 0?Because somehow APEX puts the files that I uploaded there ... they can be seen selecting from wwv_flow_files. Do they take precedence over all other files with the same name?
    Filename is unique for the given workspace[and application]I disagree. I have multiple files with the same name ... the root of this problem ...
    so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.How is your static file referenced??
    But not always, try associating an static file with and application and reference it using #APP_IMAGES# instead of #WORKSPACE_IMAGES#
    See
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm#BEIDCGAJ
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/ui_file_manage.htm#HTMDB06011
    Thanks, but the documentation doesn't give much details ... apparently files referenced with #WORKSPACE_IMAGES# can still resolve to files linked to specific applications ... I would like to understand the actual workflow for the various cases (file references with APP_IMAGES, referenced with WORKSPACE_IMAGES, file associated with the application, with another application, with no application, with application "0" ...).
    Also, I find it somewhat misleading that you can have files associate with applications that don't exist anymore (e.g. have been deleted).
    Edited by: GChierico on Apr 11, 2013 2:16 PM

  • How to send File with Same name to Receiver

    HI Frnds,
    In my peoject i have one scenario,
    I have to access Orders is the name of file , available in FTP Server, i have to send same file to Receiver side with same name Orders
    Is it possible with same name dynamically??
    Regards,
    Raj

    hi,
    You have to go for variable substitution option available in receiver file adapter,but for that you have to get the file name in receiver payload.
    http://help.sap.com/saphelp_NW04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    these links are  also helpful
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
    /people/sriram.vasudevan3/blog/2005/11/21/effective-xsl-for-multimapping-getting-source-filenames-in-legacy-legacy-scenarios
    regards,
    ujjwal kumar

  • How to run two files with same url-  urgent

    hi,
    i created two servlet page and both are working very fine.but at same time i only able to run one file with same url. Is possible to run two or more file at same time with same url name..
    if you r not understanding what i want to ask then, i have two file names under helloWeb directory
    1) helloWorld.java(servletname s1, url /man)
    2) helloWeb.java (servletname s2,url /man)
    to run - http://localhost:7001/helloWeb/man - it runs very first file which is added to deployment module.
    so i want to know how i can run both file with same url, for this what i have to pass on my address bar.
    plz help me i m wating
    <b></b>

    Hi,
    We can give same url mapping to both Servlets but we can access the servlet which is entered first in web.xml because whenever we send a request to the webserver then webserver look at the elements in web.xml file one by one.
    When it finds the corresponding url mapping then immediately sends the response to the client.The same url mapping for the next element will be ignored.
    I think there is no possibility to access both servlets with same url.
    Regards
    Anilkumar kari

  • How to create device IDs with same name

    i am using SE 3310 and its creating different device ids for each node sharing it . since I will be building a RAC enviornment I need these IDs/name to be same .
    for example  on one node the lun id is /dev/rdsk/c3t0d0s6  but the same lun id on node 2 is /dev/rdsk/c2t0d0s6.
    In past with an old storage array I fixed this issue by creating links  in /dev/rdsk for  c3t0d0s6 --->  c2t0d0s6.
    my question is : is there a way in SE3310 that device ids get created with same name or do i still have to rely on creating these soft links ?
    thanks
    Note: since i need the answer to this quickly i will wait a while and then post this question in other forums and i will update the question here with the answer .

    This could be a Solaris (I presumed) O.S. question rather than SE3310 or storage question.  
    The logical device (/dev/[r]dsk/*) is the work of the O.S. when it first configures the device,  in this case the LUN from your SE3310.   I can go in depth on how the cX number happens (due to device probe order, driver differences, history of device discovery due to need of persistent device naming, etc...) but ... it's a really long story and is really quite irrelevant and most people should not be interested...
    If you have COMPLETELY identical servers, i.e. identical hardware down to specific HBA in specific slot are the same,   and if you make sure that luns are presented to all servers exactly the same way, same order, and any changes are seen by all servers in the same sequence,  in theory,  all /dev/rdsk/* devices will be consistent across servers.
    But that's still rather irrelevant.    Application that is designed to work in a redundant environment should not be dependent on logical devices like /dev/rdsk being the same.
    So ... in effect this is also not a question for the Solaris forum,  but rather a question for those familiar with RAC,  how to configure such that device access is done "safely" through actually identifying the lun rather than assuming /dev/rdsk are consistent.

  • How to create two employees with same name as supplier record?

    Dear all,
    We need to create a supplier record for an employee so that we can issue invoice for pretty cash payment. If there are 2 employees with same name, how can we create supplier records for these 2 employees? The system does not allow duplicate supplier name.
    Please advise.
    Regards,
    HY

    Hello,
    In R12 it is possible to create 2 employee with same name but different employee number.
    And also possible to create these 2 employees as suppliers in Payables.
    HTH,
    Vik

  • Automator and applescript to copy new files in a folder with same name as parent folder

    I have an iMac with a pictures folder (Finder folder) containing several subfolders with pictures. As per now, all these subfolders are imported into an iPhoto library (and the structure of the Finder pictures folder is thus maintained: The iPhoto events are named the same as the Finder subfolder). I.e. I have not created any albums in iPhoto.
    I have also set up a workflow, where new iPhone photos are automatically being synced to specified Finder folders within the iMac pictures folder. So what I want to do is to make a workflow to import potential new photos from week to week into the existing iPhoto structure. I know iPhoto has this Autoimport folder, so this one is unpacked and "mapped". So, this is what I´m hoping to do:
    Automator (iCal - want to do this on a weekly basis):
    - Get specified Finder items -- set to target folder = iMac pictures folder
    - Get folder content (with subfolders)
    - Filter Finder items
         - Items from the last 7 days (which then would be any new files created last week)
    - Applescript/shell script loop(?)
         - Get folder name for each file´s (from previous step) parent folder
         - Create new folder with same name as the file´s parent folder (if not already existing) under the iPhoto Autoimport folder
         - Copy the given file into the folder from above
    - Run iPhoto application (Automator task), which then should just auto import the new photos according to the Finder folder structure
    Whith the workflow above, I aim to maintain the existing iPhoto structure, and just import new photos into the existing structure. Creating folder names under the Autoimport, similar as the existing Finder folder names / iPhoto events should make it possible to have the new files imported under the existing event, right?

    Anyone?
    I have now switched to Aperture (from iPhoto) due to Aperture´s capability to handle Finder folder structure, and due to the possibility of having the pictures within Aperture as referenced files to the pictures within the Finder folders (i.e. possibility to delete pictures from both library and Finder folder at the same time).
    So I have a superior Finder folder called "Album". Within "Album" I have several subfolders (sub albums) containing pictures. The "Album" folder with subfolders are imported into Aperture as "Projects and albums", and the pictures are uploaded within the Aperture structure as referenced files. So for now the Aperture structure is more or less a direct mirror of the Finder folder structure, whereas "Album" is the project.
    And this is my current workflow in Automator, but I´m searching help with my Applescript:
    - Get specified Finder items (target folder = the superior Finder folder "Album")
    - Get Folder content
    - Filter Finder items (to look for potential new files to import into Aperture)
         - Kind is not folder
         - Date created last X days
    The output files from this task enters an Applescript
    on run {input, parameters}
           repeat with f in input (**Loop**)
                   tell application "Finder"
                          set fileName to name of (f)
                          set parentFolder to name of container of (f)
                          tell application "Aperture"
                                 tell library 1
                                        tell project "Album"
                                               if (exists album parentFolder) then
                                                 ** I then would like to check if fileName already exist within the existing album**
                                                 ** If not existing, I would like to import file f into the existing album as a referenced file**              
                                               else if not (exists album parentFolder) then
                                                       make new album with properties {name:parentFolder}
                                                ** I then would like to import file f into the new album as a referenced file**
                                               end if
                                        end tell
                                 end tell
                          end tell
                   end tell
           end repeat
    end run

  • Files with same name

    Hello,
    Is it possible to have several files with different assetId, but with the same assetUri, and in the same folder?
    Initially, I though yes, because the assetId is a unic id that could differentiate two asset with the same assetUri (that is the visible name in the user interface).  But after trying, I noticed that, in this situation, sometime only one asset is shown in the UI (bridge for example), and sometime all the assets are shown, but they are inaccessible (no preview, no possible to open them, no information, just the two assets with the same name represented in Bridge).
    Is there then a way to show, in the user interface, two assets (with different assetId) with a same name?
    Thank you
    ps: by the way, to have two files with same assetUri, different assetId and in the same directory, it makes Bridge struggling (using 100% processor)

    You can use the same class name in different packages.
    The Java API does that (java.awt.List, java.util.List).
    This is odd. What version of javadoc are you using,
    and what command are you passing in, with what classpath setting?
    -Doug Kramer
    javadoc team

Maybe you are looking for