How do I add hours in Numbers?

I created two columns with time I started working on a job and the time I ended. I would like the final column to add up the hours i worked. How do I do this?

maricusitin,
When you subtract a larger number from a smaller number, you will get a negative result. In this case, 1:30 pm is greater than 10:00 am, so you get -3h. If you subtract 10:00 am from 1:30 pm, you should get a positive difference.
Jerry

Similar Messages

  • How do I calculate hours in Numbers?

    How do I calculate hours in Numbers? Example: I inserts 7:00 in a cell and 11:30 in another cell. What function do I write to get 4:30?

    Hi Interlaga,
    Enter start time in A2. Enter finish time in B2. They will become Cell > Data Format > Automatic with Date and Time (Date None).
    Formula in C2
    =B2−A2
    That becomes Cell > Data Format  >Automatic
    Refinement is to use 'Date and Time' Format for start and finish, and 'Duration' format for the difference.
    Remember that in Numbers, every Date has a Time attached, and every Time has a Date attached (even if they are not displayed in the cell). So if you enter the times on different days (the 'crossing midnight' problem) the finish time will be 24 hours later .
    It took me a while to understand this, but a Time or a Date is an instant since 1 January 1904.
    Call back for more help.
    Regards,
    Ian.

  • How can I add the file numbers to each photo as a batch in photoshop on a mac?

    Can anyone tell me how I can add the file numbers of each individual photo to the picture and do it as a batch?

    Have a look here http://www.dmxzone.com/go?12067
    Gramps

  • How do I add multiple phone numbers at once to a contact? Is there any software able to do this, which I can import to iCloud?

    I have my email forwarded to my cell phone via message to [[email protected]].
    I do this for the reason that having my emails fetched constantly is a heavy burden on the battery.
    This works perfectly, except for the fact that the emails come from a different number every time.
    The numbers change by 3 digits from 001-999. (1-210-100-###)
    I can write these numbers easily using something like excel to write the consecutive numbers, and not have to write one by one, but I would like to import these easily to my contact under "Email" for several reasons.
    1. SMS tone to be consistant
    2. Easy identification
    3. Easy deletion
    4. Message grouping
    There are probably more benefits, however I cannot think of any at this very moment.
    I want to basically write them all in to the contact to make the identity seamless.
    I've tried to do so with
    -Gmail - one number entry at a time
    -Editing the .abbu file using text editor - Cannot find the phone number location to copy and emulate
    POSSIBLE SOLUTION
    Editing the contact using excel - I downloaded "Addressbook2CSV Exporter" and managed to get the contact information in an editable form.
    I got the contact info which looks like
    [,Other","","","1210100001 ::: 1210100002","","","","","","","","Generic","","","","","","","","","","",]
    MEANING, if I can manage to merge the 999 numbers into one line of text, and add them to the numbers separated by "{space}:::{space}"
    then I have my solution right there. This may have turned from an iCloud question to an excel question.
    Any suggestions will be greatly appreciated.

    Fair enough.
    I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
    I then continued it due to its convenience. My only counter argument is this:
    Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
    Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
    I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
    Thanks guys.

  • How do I add folders in Numbers

    Not sure how to add a Folder to my Numbers application. New spreadsheets are no problem but I would like to combine them into a folder.
    Thanks,

    I resolved the issue, simple really.
    Thanks

  • How do I add borders in numbers -

    When I add a border in Numbers, it looks right but when I go to add another in the same table, the first one disappears -

    Method one:
    Select the border you wish to change with your cursor - the cursor icon should change, if this doesn't happen you need to Allow Border Selection - look on the toolbar for the double-topped-rectangle with the arrow pointing into it, pull down the menu and this should be the bottom option.  So select the border by clicking on it, click again to change the length of the border you are selecting.  OR use that same menu in to tool bar to select the borders you wish to change.  Now use the menus to the right in the toolbar to change the line, thickness of line and colour.
    Method two:
    Use Inspector - Table Inspector
    Either way, if you select a group of cells that have different cell border properties, your change may not stick - to fix this change it to something else, and then change it back or just change the ones that are wrong.

  • How can I add three binary numbers and then convert to string (Hex format)?

    Hi All,
    I have my problem "half" resolved, but need some assistance on the final piece.  Overall, I need to take three string values (hex format), convert them to binary, add them and then convert back to a string (hex format).  If that doesn't make sense maybe this will:
    Final Result (My target) = 0xCC
     = 0x03 + 0x01 + 0x04
              = 0x03; 0011b
              = 0x01; 0001b
              = 0x04; 0100b
    For my app, we are dropping "masking" some of the bits so that we get 1 byte:
              = 0x03; 11b
              = 0x01; 001b
              = 0x04; 100b
    So...
    11001100b = 0xCC
    In my VI, I am taking each initial string [0x03,0x01 and 0x04] type casting them to U8.  Next I need to "mask" the binary values as shown above and then add them.  I am not sure how to do this in LV??
    Thanks for the help,
    Bryan

    Hi Bryan,
    there's a conversion palette in the string palette, ever looked at those functions?
    The rest is pure simple math:
    It's the straight-forward way, there are other possibilities too!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • How do I add currency to duration in Numbers '09

    Hi there!
    I'm in way over my head when it comes to using formulas (other than the quick calculations) and I could do with some of your expertise if possible?
    I'm a freelance graphic designer and I'm trying to produce a quoting system to calculate costs for print only, design only and both of these combined.
    See example table here: http://www.losavellanos.co.uk/picture1.jpg
    1) The numbers from D4 to H4 are fictional quotes supplied by printers - how do I add a percentage to these (in this example 20%) and then have the total of both below, in row 6? Is it possible to show the 20% increase as currency (as my example in D5)? e.g. on the table, D4 is £475.00, D5 should be £95.00 and D6 should be £570.00? - I could then SUM both D4 and D5 to get the total in D6.
    2) The numbers in D8 to H8 are example hours for design time and I'd like to add values to these cells so that the totals appear as currency below in rows 9 and 10. The 2 values would be based on a standard hourly rate e.g. £40 per hour and reduced rate e.g. £25 per hour. (I have added these already to show you what it would say if it worked - ideally I would like this to be calculated for me when I change the numbers in row 8)?
    Any help will be really appreciated (my head hurts)...

    It's really simple and it would be useful to download and read *Numbers User Guide* and *iWork Formulas and Functions User Guide* available from the Help Menu !
    CAUTION: as I am running French system you must edit the formula for cell W4 !
    On an English system, it must be:
    =AVERAGE(U4,V4)
    Yvan KOENIG (VALLAURIS, France) dimanche 4 octobre 2009 18:34:52

  • How do I add a linear slope equation (y-intercept form) to a graph in the latest version of numbers?

    I recently spent a lot of time trying to figure out how to add a linear slope equation to the best fit line of a scatterplot graph in numbers, which was a requirement for a chemistry lab report I was working on. After failing to figure it out on my own or find any relevant info on the internet, I had to copy/paste my data into excel and do it from there. Does anybody know how I can do this in numbers? Obviously excel works just fine but I like the aesthetics and the simpler formatting options of the graphs that I get using numbers.

    The option to show the linear best fit equation is in the Series Format pane under Trendlines.
    Jerry

  • How do I add multiple rows in Numbers for iPad?

    how do I add multiple rows in Numbers for iPad?

    Hi James,
    On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
    If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
    quinn

  • How do I add email address to a cell in a Numbers spreadsheet without the appearance automatically changing color and underlining? In Excel, I would add an apostrophe at the beginning which would keep this from happening.

    How do I add email addresses in a column without them automatically converting to another color with underscores. I want the text to remain text.

    Hi Sclaire,
    Numbers > Preferences > Auto correction.
    Uncheck the indicated checkbox.
    Preferences panel image is from Numbers 2.3.
    For future questions, please indicate the versions of Numbers and of OS X you are using, as answers will differe depending on this information.
    Regards,
    Barry
    Message was edited by: Barry (Corrected arrow position)

  • How do I add page numbers to my document without the page numbers automatically changing. I do not want the page numbers the software automatically places into my document.

    How do I add page numbers to my document without the page numbers automatically changing? The title page is blank, I can type in 1 on the 1st typed page, but the #1 automatically goes into the next page and will not change.

    Click at bottom of the first page:
    Menu > Insert > Section break
    Click somewhere in the 2nd page (not the header/footer)
    Inspector > Layout > Section > Page Numbers > Start at 1 > Configuration > uncheck use previous headers and footers
    Click into the header or footer of the second page:
    Menu > Insert > Auto Page Numbers…
    If there is anything in the header or footer on the first page that you don't want just select it and delete it.
    If you really wanted to manual place page numbers on each page you will have to use a section break between each and every page. I can't imagine that would be useful.
    Peter

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How do I add page numbers on a Pages doc.?

    How do I add page numbers on a pages doc.?

    It won't work in Layout mode documents but in Word Processor documents:
    1. Add a Textbox and move it to the top right, turn off Textwrap
    2. Insert a page number in the box
    3. Select the Textbox: Menu > Arrange > Section Master > Move Objects to Section Master/Make Master Objects Selectable
    4. Insert a Section Break on each page. It has to be a Section break otherwise editing the Master Objects will repeat on previous pages.
    Peter

  • How do I add a few more numbers to my Friends and Family?

    How do I add more numbers to my Friends and Family?

        Hello lisascv,
    I want to make sure we can get your plan updated. The use of Friends and Family numbers is a great way to esnure that the people you call most don't affect your allowance. For steps to manage your Friends and Family list, please use the following link and select Friends & Family: http://vz.to/1n8QjsJ
    AndreaS_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for