How do I add IONcube to my server?

I have some parts of our sites using the IONCUBE ( http://www.ioncube.com/ ) encoder.
Can someone tell me:
1. What version to use on the MacMini Server?
2. How to install it?

No users of ioncube in here?

Similar Messages

How do I add an Address Book Server account to iPhone 3G iOS 3.1.3

Heya,
I have an iPhone 3G that is running version 3.1.3 of the iPhone OS and I need to add an Address Book Server account (that is being run on Snow Leopard Server to the phone but the only option I have is LDAP. My understanding is that Address Book Server uses CardDAV not LDAP. So I went ahead and added the account by choosing "Settings" -> "Mail, Contacts, Calendars" -> "Add Account..." ->"Other" -> "Contacts - Add LDAP Account" and entered my servers information. After selecting "Next" it prompts me with the following message:
"Cannot Connect Using SSL - Do you want to try setting up the account without SSL?"
I choose "Continue" -> the message disappears and I choose "Save" -> then I'm prompted with this message:
"This account may not be able to search contacts. Are you sure you want to save?"
I choose "Save" and it appears to add it. To verify I exit "Settings" and go to "Address Book" and none of my contacts appear. I even let it sit for an hour on a WiFi connection without any luck. Can someone help?
Thanks!
Tags: ios 3, ios 3.x, addressbook server, addressbookserver, sls, carddav, ldap, iphone 3g

Haha, I asked for that.
I get the error "Unable to verify account information" whenever I try and add the account (note I've hidden my email address in the picture)

How do I add my phone's Wi-Fi Mac address to my home server so that I can use my home Wi-Fi with my phone?

Hello. I am using an Android cell phone and, though the phone sees my home server name and accepts my password, it won't connect. I understand that I may have to add my phone's Wi-Fi Mac address to my home server in order for it to allow my phone access, but I have no idea how I might do that. Could someone help me with this? Thank you.

Tdalso wrote:
How do I add a phone number so I can use either my US or Canadian number (depending on where I am) with iMessage and Facetime on both my iPhones?
You need to log out of iMessage and Facetime, make sure your number is correct in Settings/General/About, then log back in again to send a new activation request.

How do I add an objectclass to existing LDAP server entry using an ldif file?

I am trying to fix an LDAP server that has been operating with schema check off. I need to add an objectclass to the groups so that some attributes that have been added to the groups will be "legal." From the documentation, the changetype: modify will allow the changing/adding of attributes that are already a part of the schema objects that define the entry. It does not look like I can add an objectclass with the modify operation.
If this is the case, then how do I add an objectclass to an existing entry? Using the GUI is not possible since the directory server in question is not being managed with an admin server. Please tell me that I do not have to delete the groups and import them again with an LDIF file that has the new objectclass added.
Kent

See this post:
http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000636B0000&USEARCHCONTEXT_CATEGORY_0=_21_%24_7_&USEARCHCONTEXT_CATEGORY_S=0&UCATEGORY_0=_21_%24_7_&UCATEGORY_S=0

Messenger Express: How do I add the Directory Server to the address book search tool?

In Messenger Express (ME) how do I add the Directory Server (DS) to the address book
search tool?

Edit the globals.pl file. Look for a line similar to: 
@dirservers = ('MyCompany::phonebook.foo.com::o=FooCorp.,c=US','Four11 Directory::ldap.four11.com::');

Add an entry to the list. The list is comma delimited and each entry is a
string. The string contains three fields, delimited by a double colon (::). The
first field is the name you want to appear in the User Interface (UI). The second is
the hostname of the DS and the third is the Distinguished Name (DN) to use when searching.

Please note, Messenger Express is part of the Messaging Server. For more
information on Messenger Express, please see the release notes at
http://home.netscape.com/eng/server/MExpress/relnotes.htm

You can't add a new contact to specific group and there is no app for this. 3rd party apps don't have access to private iPhone APIs with security concerns being a primary reason, which such a function would require.

How do I add Holidays to my Calendar Server?

How do I add Holidays to my Calendar Server?

Adding Holidays to your Calendar Server is done via the Netscape
Calendar Client by going to the Edit|Holidays pull-down menu.
This option can only be accessed by those users who have been given
the admin rights to add holidays.
If you wanted to give "John Smith" admin rights to add holidays on
a Calendar Server with a node id of 10000, you would do the
following:
o Login as 'root' or 'unison' to your Calendar Server.
o Change directories to /users/unison/bin.
o Run the command:
uniadmrights -e "S=Smith/G=Bob" -hday -n 10000
Now the user John Smith can add/delete/modify holidays on the
Calendar Server.

Include birthday in your contacts using the Contacts app. Then in Calendar go to the list of calendars (touch the red Calendars at the mid bottom of the screen), scroll down until you find the Birthday calendar, and touch it so that it has a tick mark beside it. Not only will the birthday show up every year, it will even tell you how old they are!

How do I add a selection screen parameter to get a application server file

Hi All..
Can you please suggest how can we add a selection screen parameter to get a application server file ?
Thanx in Advance...
Regards,
Deepak

Parameter def :
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 02(30) text-005 FOR FIELD p_xlfil.
PARAMETERS: p_xlfil LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Browse
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xlfil.
PERFORM ws_get_filename USING p_xlfil.
FORM ws_get_filename USING p_xlfil.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_path = 'C:'
 mask = ',Excel,*.xls,All,*.*.'(100)
 mode = 'O'
 title = 'Title'(101)
 IMPORTING
 filename = p_xlfil
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0.
 CLEAR p_xlfil.
ENDIF.
ENDFORM. " WS_GET_FILENAME
Regards
Oops i did not read "application server"
Use FM F4_FILENAME_SERVER and not F4_FILENAME/WS_GET_FILENAME.
Message was edited by:
 Raymond Giuseppi

How should I add an automated procedure to my server

Hi,
I have Mac OS X Server 10.3.9 running on a eMac.
I wondered how could I add and automated procedure to my server, I explain.
I have a dyn IP provider (no-ip.com) who accepts IP updates via http GET request with a URL like this : http://dynupdate.no-ip.com/dns?username=[email protected]&
password=mytestpassword&hostname=mytest.testdomain.com
Is there a way to get this line executed every 5 minutes with the server ?
Sorry for my bad english but regards to those who are able to answer
eMac Mac OS X (10.3.9) Server

I succeded with the curl method
applaus ;o)
Now I'm working with crontab and I try to understand it
The system crontab is /etc/crontab. Edit it with the command line editor of your choice. If you happen to do not know one, the simpelst one imo is pico.
Try it out with pico testfile.
For the crontab syntax see my first post. You have to add a line like:
0 0 * * * philippe curl "http://..../"
This would start curl once a day at midnight.
Thanks for the help very useful
Points, points, points.... ;o)
-Ralph

How add new Oracle Report server

Dear All
I need to add new Oracle Report Server on my oracle application server beside server exists
it is applicable and how?
also i need to change database using by this report server
i'm using oracle application server 10.1.2.0.2
on windows server 2008
Edited by: Hshihadah on Jan 19, 2011 12:49 AM

hi,
Go to ORACLE_HOME/bin
Open AddNewServerterget.sh ---------for unix
and AddNewServerterget.bat ---------for windows
$./AddNewServertarget.sh <reportserver name>
$dcmctl updateconfig
$dcmctl resyncInstance
$opmnctl status
Thanks,
Santosh
Edited by: user12045405 on Jan 19, 2011 1:50 AM

How do i add photos from an iPad to a Wiki Server wiki page?

How do i add photos from an iPad to a Wiki Server wiki page?
When i click edit in a wiki page the menu at the top is different than the desktop version and there a no attachment buttons, no image buttons or video.
I tried copy pasting from photos but it just says Loading and the image does not appear in the text.

The transfer of photos from your computer via the iTunes sync/transfer process is a one way transfer process only - from your computer to the iPad. The iPad is not designed or intended to be a backup storage device. Photos transferred from your computer are optimized for viewing on your iPad - the resolution of most or all of these photos is reduced on your iPad, which is why transferring these photos in the opposite direction is not supported.
There are some 3Rd party paid utilities that provide for transferring these photos in the opposite direction, but such utilities are not supported by Apple and the original resolution of the photos will be lost. Here is one such utility that is Mac compatible.
http://www.ecamm.com/mac/phoneview/

How to add PSP (PL/SQL Server Page) application to an Oracle Apps 11i menu

How can I add a small application (drilldown search) I developed using psp (pl/sql server page) into a menu inside Oracle Apps 11i?

Hi
Here's how I do it:
1. Create the function.
In the Function Type use one of the PLSQL options, for example WWK which is a popup PL/SQL function.
In the web_html_call, simply add the package.procedure
2. Setup Security
In order to be able to call a PL/SQL procedure from a web page, you need to add it to web enabled PL/SQL
Do this in System Administrator, under "Security / Web Enabled PL/SQL " or similar (can't remember offhand)
3. Make the call
You should then be able to call it using
http://server:port/pls/DBSID/package.procedure
Obviously substiture DBSID for you database SID.
Should work, done it loads..
Chris

How to add more than one server in emanager

Hi All,
In Java CAPS6, If I add more than one domain that is GlassFish server, how can I add these server in emanager. I am able to add only one server in eManager.
Please let me know if any one knows.
Thanks & Regards,
B

Hi,
I have the same problem. I succeeded in adding the default domain (on the default port 4848) but when I try to add another domain on a different admin port, the connection cannot be established. Here is the manager log :
2009-02-18 10:41:23,867 ERROR [http-15000-Processor24] com.stc.emanager.deployment.actions.AddNewServerAction - java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Bad response: (404Not Found due to Connection Failed. Please check the following: &nbsp - Server Type is correct. &nbsp - Server is running. &nbsp - Hostname and Port number(s) are correct. &nbsp - Server SSL configuration.
The manager and appserver are on the same server.
As someone resolved the problem ?

How to add a second DNS server entry

Our primary DNS server is having problems (internal system) - we want to keep its listing on our mac server however. We need to add a second DNS server - we don't care what it is, we might want to add 2 additional servers - one internal and one external (google dns for example).
How do we do this through server admin? Thank you.

Solved. Added entreis in DNS section of Server Admin. Adjusted DNS entry in network section of system prefs to reflect loopback address. Stopped and restarted DNS. Thanks.

How to add a new j2ee server to PI system?

how to add a new j2ee server for our PI product system?
Is it to execute 'install dialog instance ' steps?
Thanks

Hello
I have moved this thread to the Netweaver Administrator forum (this is not a PI technical issue). You have a better chance of getting a quality answer to your query in the Netweaver Administrator forum.
Take the notes below into consideration after you have added the java node.
1) #734931 Using a J2EE cluster in the XI 3.0/7.0 environment
2) #1079478 Using a J2EE Cluster in the PI 7.10 environment
Can anyone assist with how to add a java node?
Regards
Mark Smyth
XI/PI Moderator

How to add domain in Exchange Server

i have installed exchange server it is working fine i am able to create multiple (email account / mailbox) for default domain but
i have 5 domains and i want multiple (email account / mailbox) on each domain
i have also added the domain but that domain is not visible in mailbox creation option please any one tell me how can i add multiple domain to create email account /mailbox
for example
"[email protected]","[email protected]","[email protected]","[email protected]","[email protected]"

What Policies should i add and how can i create MX and SPF record for domain
Email Address Policies
Email Fundamentals: What is an MX Record?
Sender ID Framework SPF Record Wizard

How do I add IONcube to my server?

Similar Messages

Maybe you are looking for