How do I add more ports to my new Airport Extreme?
How do I add more ports to my new Airport Extreme? What do I need to buy?
Thinking to leave as is for now- one 2013 extreme.
That would certainly keep things a lot simpler.
Does it seem right that using speed test I'm getting similar speeds, no matter if I'm connected via wi-fi, or Ethernet?
A very good sign assuming those speeds are reasonably close to the your plan offered by your ISP. The Extreme itself is capable of much faster speeds than your ISP can ever hope to provide.
I'm thinking that all the speed in the world is not going to change Time Warner Cable, the provider for earthlink cable
Not sure what you mean here. Time Warner provides various plans, some up to 50 Mbps. I get 60+ consistently with this plan. I had a 30 Mpbs plan before that consistently delivered about 35-36 Mbps.
The math is simple. If you download a lot of files from the Internet, a 50 Mbps connection is going to take half as long to download a file as a 25 Mbps connection, for example.
One word of caution though....if you try a higher speed plan...plan to stay, as you will never go back to slower speeds once you have sampled higher speeds. Comcast now owns Time Warner by the way. I don't know whether that will be a good thing or a bad thing.
Similar Messages
-
How to connect old aiport express to my new Airport Extreme?
I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
My Ipad says "base station e5713b cannot be configured."
I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
SigveHi
Thanks for Swift reply.
Yep - I in fact have two A1088 and one A1264
I actually bought the new router because the Jensen
router always lost connection to the Airport Express after some hours or days. I
always needed to restart my Jensen to play music and that was driving my wife
mad. The hope was that the Extreme should fix this. Both A1088 have been set up
to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
Are the A1088 now useless?
The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
Please advise
Regards
Sigve -
How do I add a hub or switch to Airport Extreme?
Hi gang-
I have the 802.11g Airport Extreme. It has only the one Ethernet-out LAN port, and I'd like to add more ports to expand my wired network. What is the best way to do this? Do I plug in a router or hub or just a simple switch? Any tips on how to configure this?
Thanks!
DaveI suggest going with an 4-8 port Ethernet switch ... something like the Linksys EZXS55W or any similar model from another vendor. Just connect an Ethernet cable from the AEBS's LAN port to either the Uplink port (if the switch uses one) or any available port on the switch.
-
How do I add a guest network to existing airport extreme configuration?
I have an existing Airport Extreme configuation in my home Wifi network and I want to add a guest access point. When I open the recently updated airport utilities, the screen no longer looks the way it used to, with the side bar on the left and my devices listed there for me to select (I also have an Airport Express). I used to be able to select the Airport Extreme from the left side bar, then hit continue to change any settings. Well now, since it updated, the screen looks different, with internet at the top, pointing to the Airport Extreme, then the Airport Express. When I select the Airport Extreme, it no longer gives me the option to change the settings for it, which is where my problem lies! Any help? I know it's probably something very simple that I am missing, but I'm at a loss.
Why would I download a lower version of AirPort Utility?
To gain more functionality.....since AirPort Utility 6.0 is otherwise known as "AirPort Utility Lite" on the forums. It's a "first try" for Apple with a new look. While it does look nice, it has been downgraded as far as the features are concerned.
For example, if you open AirPort Utility 5.6 and click on the AirPort Extreme on the left, your Generation version will be displayed on the right side of the page. There are many more advanced settings available in AirPort Utility 5.6 as well...that are not available on 6.0.
But, you don't have to install AirPort Utility 5.6 if you don't want to. I suggested it because it offers more features and will also look exactly the same as the AirPort Utility that you have used previously.
If your AirPort Extreme is in Bridge Mode, this indicates that you have another device...probably a modem/router....which is acting as the main router on your network. Bridge Mode is the correct setting for the AirPort Extreme in this case.
If you can post back with the make and model number of your "modem", we can check to confirm.
Unfortunately, the Guest Network cannot be enabled unless you configure the AirPort Extreme to be the "main" router on your network, which is likely not possible. If you try to configure the AirPort Exteme otherwise, you will receive error messages and the network will not function correctly. -
New Airport Extremes any more reliable for wifi backups?
I was one of the many folks who spend hours configuring and reconfiguring my network a few years back trying to get Time Machine to play nice with my USB hard drive for the sole purpose of daily automatic time machine backups over WiFi. Something about Apple not technically supporting this practice, but that it *could* work, *sometimes*, *for some people*. In my experience I could get it working for a matter of days at a time before the link would break and my backups would become inaccessible by either wifi or by direct USB connection, forcing me to re backup my entire HD each time it happened, until I eventually gave up on it all together.
Fast forward to today, I still hate having to go through the process of finding my hard drive, plugging into power, finding a USB cable, etc etc etc every time I want to make sure my backups are up to date. Thus, it gets done very infrequently and therefore makes my backups far less useful if I should ever need them.
As luck would have it, over the holidays I acquired the NEW Airport Extreme w/ 802.11n... have these issues been fixed?
All I want is a reliable, daily, automatic time machine backup, OVER wifi, THROUGH the new airport, TO my USB connected Phantom drive. Can it be???As luck would have it, over the holidays I acquired the NEW Airport Extreme w/ 802.11n... have these issues been fixed?
Apple now officially supports Time Machine backups to a hard drive at the USB port of the "new" AirPort Extreme.
See this Apple support document for confirmation. Look down near the bottom of th document for the pertinent info.
http://support.apple.com/kb/HT5924?viewlocale=en_US
All I want is a reliable, daily, automatic time machine backup, OVER wifi, THROUGH the new airport, TO my USB connected Phantom drive. Can it be???
"Wireless" and "reliable" are two words that really do not go together well, but your chances have improved with the new AirPort Extreme. -
How do you add more lan to airport extreme?
how do I add more ethernet ports (LAN) to my airport extreme?
A switch has no routing functions....just as if a router were in Bridge Mode.
The switch will be on the same subnet as the LAN port on the router....assuming that the Ethernet cables, etc are all working correctly.
You can plug into the switch, or into one of the Ethernet ports on the AirPort Extreme. The connection is the same....everything is on the same LAN. If you want, you can plug another switch into the switch.....or into another LAN port on the AirPort Extreme. All the same. -
How can I add more than one same spry menu (eg. collapsible menu) with in different styles (font size, color, background, etc) on current page?
Hi Nancy,
This screenshot was only for imagination. A part of the code (not all) is below. In the code there are some background images but they are not seem in live mode.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title></title>
<link href="css/my_site.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css"/>
<link href="SpryAssets/SpryCollapsiblePanel.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<script src="SpryAssets/SpryCollapsiblePanel.js" type="text/javascript"></script>
<style>
#CollapsiblePanel1 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-color: #003366;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel1 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
line-height: 52px;
#CollapsiblePanel1 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
line-height: 52px;
#CollapsiblePanel2 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/international.jpg);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel2 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel2 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel2 .CollapsiblePanelContent {
background-color: blue;
#CollapsiblePanel3 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel3 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel3 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel4 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel4 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel4 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel5 .CollapsiblePanelOpen .CollapsiblePanelTab {
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
font-size: 18px;
line-height: 52px;
color: #FFF;
#CollapsiblePanel5 .CollapsiblePanelTabHover .CollapsiblePanelTab {
background-color: #003366;
color: #FFF;
text-shadow: 1px 1px #000;
font-weight: bold;
background-image: url(images/TR_Col-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
#CollapsiblePanel5 .CollapsiblePanelClosed .CollapsiblePanelTab {
background-color: #C3CFDF;
border-radius: 5px 5px 0px 0px;
color: #999
text-shadow: 1px 1px #000;
font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
font-size: 18px;
font-weight: bold;
background-image: url(images/TR_Gray2-WEB.png);
background-repeat: no-repeat;
line-height: 52px;
</style> -
How do I add more than one picture on a page?
I just started using Lightroom, and I want to know how I can add more than one picture onto a page to print or email. Right now, I will choose a picture, and it will make all of the pictures on the page that picture. I have even tried dragging a picture onto a page, but it just changes all of the pictures to the dragged picture.
Thanks.It can be done in Lightroom 2 but, as John pointed out, it requires a 'hack.' Here is how it's done:
http://lightroomkillertips.com/2009/video-multi-photo-picture-packages/ -
How can i add more than 500 jPanels in a jScrollPane
Hello to all ,
I am facing a problem related to adding jPanels in jScrollPane. My application needs more than 500 jpanels in the jscrollpane.where in each jPanel 4 jtextboxes, 1 comboboxes, 1 check box is there.when the check box will be clicked then the total row( ie row means the panel containing the 4 jtextboxes, 1 comboboxes, 1 check box ).and when the user will click on move up or move down button then the selected jpanel will move up or down.
The tool(sun java studio enterprise 8.1) is not allowing more Jpanels to add manually. so i have to add the jpanels by writing the code in to a loop. and the problem is that when i am trying to add the code in the code generated by the tool the code written out side the code by me is not integratable into the tool generated code.
If u watch the code here am sending u ll get what am facing the problem. The idea of creating jpanels through loop is ok but when trying to impleent in tool facing difficulties.
A example code am sending here. please tell me how i can add more panels to the scrollpane(it is the tool generated code)
Thanks in advance , plz help me for the above
package looptest;
public class loopframe extends javax.swing.JFrame {
/** Creates new form loopframe */
public loopframe() {
initComponents();
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jPanel1 = new javax.swing.JPanel();
jPanel2 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JTextField();
jComboBox1 = new javax.swing.JComboBox();
jPanel3 = new javax.swing.JPanel();
jTextField2 = new javax.swing.JTextField();
jComboBox2 = new javax.swing.JComboBox();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextField1.setText("jTextField1");
jComboBox1.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.add(28, 28, 28)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 109, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(54, 54, 54)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 156, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(35, Short.MAX_VALUE))
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(21, Short.MAX_VALUE))
jTextField2.setText("jTextField2");
jComboBox2.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel3Layout.createSequentialGroup()
.add(20, 20, 20)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 111, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(33, 33, 33)
.add(jComboBox2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 168, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(40, Short.MAX_VALUE))
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel3Layout.createSequentialGroup()
.add(21, 21, 21)
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jComboBox2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(21, Short.MAX_VALUE))
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addContainerGap(58, Short.MAX_VALUE))
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(21, 21, 21)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(49, 49, 49)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(66, Short.MAX_VALUE))
jScrollPane1.setViewportView(jPanel1);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(31, 31, 31)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 439, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(74, Short.MAX_VALUE))
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(30, 30, 30)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 254, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(55, Short.MAX_VALUE))
pack();
}// </editor-fold>
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new loopframe().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JComboBox jComboBox1;
private javax.swing.JComboBox jComboBox2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextField jTextField1;
private javax.swing.JTextField jTextField2;
// End of variables declaration
and
package looptest;
public class Main {
public Main() {
public static void main(String[] args) {
new loopframe().setVisible(true);
}Thanks for here kind attention to solve my problem.
I am thinking to create the classes separately for the components (i.e the jpanel, combobox,textbox etc)and call their instaces from the for loop .But the problem is the jpanel will contain the other components and that jpanels (unlimited jpanels will be added later)will be later added to the jscrollpane.
By writing code, the problem is to place components( the comboboxes,textboxes etc placed on the jpanel ) in appropriate coordinates . So i am doing it through tool .
I am sending here the sample code related to my actual need . In this i have taken a jScrollPane, on that i have added jPanel1 and on jPanel1 i have added jPanel2.On jPanel2 jTextField1, jComboBox1,jCheckBox are added. If the u ll see the code u can understand what problem i am facing.
If i am still not clearly explained ,please ask me. plz help me if u can as u have already handled a problem similar to this.
package addpanels;
public class Main {
/** Creates a new instance of Main */
public Main() {
public static void main(String[] args) {
new addpanels().setVisible(true);
} and
package addpanels;
public class addpanels extends javax.swing.JFrame {
/** Creates new form addpanels */
public addpanels() {
initComponents();
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jPanel1 = new javax.swing.JPanel();
jPanel2 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JTextField();
jComboBox1 = new javax.swing.JComboBox();
jCheckBox1 = new javax.swing.JCheckBox();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextField1.setText("jTextField1");
jComboBox1.setModel(new javax.swing.DefaultComboBoxModel(new String[] { "Item 1", "Item 2", "Item 3", "Item 4" }));
jCheckBox1.setText("jCheckBox1");
jCheckBox1.setBorder(javax.swing.BorderFactory.createEmptyBorder(0, 0, 0, 0));
jCheckBox1.setMargin(new java.awt.Insets(0, 0, 0, 0));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 131, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 144, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jCheckBox1)
.addContainerGap(39, Short.MAX_VALUE))
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel2Layout.createSequentialGroup()
.addContainerGap(17, Short.MAX_VALUE)
.add(jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jComboBox1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(jCheckBox1))
.addContainerGap())
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(34, Short.MAX_VALUE))
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.add(26, 26, 26)
.add(jPanel2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(152, Short.MAX_VALUE))
jScrollPane1.setViewportView(jPanel1);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(36, Short.MAX_VALUE)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 449, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(18, 18, 18))
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(32, 32, 32)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 230, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap(38, Short.MAX_VALUE))
pack();
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new addpanels().setVisible(true);
// Variables declaration - do not modify//GEN-BEGIN:variables
private javax.swing.JCheckBox jCheckBox1;
private javax.swing.JComboBox jComboBox1;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextField jTextField1;
// End of variables declaration//GEN-END:variables
} -
How do I add more email address to safe sender ?
how do I add more email to safe sender ?
Hello jdalsmith,
If you are trying to add more email addresses to your "Allowed Senders" list in ePrintCenter you need to click the icon in your ePrintCenter account labeled "ePrint Settings". From here, click the button next to "Allowed Senders Only" if it is not already selected. All you need to do from here is type an email address in the blank text box and click the button "+ Add Email" and it should be displayed below in the list of Allowed Senders. Make sure you click "Save" to keep these settings after you have finished.
If you need further assistance, feel free to reply to this post and I will try my best to find an answer for you.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
How do I add more $ to my iTunes acct on my IPOD touch
How do I add more $ to my iTunes acct on my IPOD touch
Redeem a prepaid iTunes card or a gift certficate.
Regards. -
How do I add more GB to my iMac?
I'm hoping this is the right place to put this (I'm a bit inexperienced in the whole hardware-software department, so really don't know what pertains to what). I've got an iMac which I got back in 2008, and am looking to update it to Mountain Lion. However, that apparently requires 2 GB, and it's told me I haven't got enough. So, question is, how do I add more GB so that I can actually update it to Mac OS X Mountain Lion? It's got Snow Leopard at the moment (10.6.8).
Here're some of my computer details:
Model Name - iMac
Identifier - iMac 7, 1
Processor - Intel Core 2 Duo
Speed - 2.4 GHz
L2 Cache - 4 MB
Memory - 1 GB
Thanks all.Your model supports:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
Two - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs
To upgrade you will need to purchase two new memory modules to replace the ones you now have installed. You can purchase memory at OWC or DataMem. OWC also has video tutorials on how to install memory in most Macs. -
How do I add more channels to my input source?
I'm trying to record my son's band on a iBook in the rehearsal studio, and would like to also do this type of recording on my iMac here at home, so how do I add more channels to my input source for simultaneous multi-track recording. Right now I am only getting 2 mono and 1 stereo channels.
Ultimately I would like to add the maximum amount (probably 8 tracks), and still be able to record simultaneously with at least one guitar, one bass, one vocal mike, and the drums on one mike...
According to Hangtimes/Garage Door website, this is a possibility, but first I must create more channels.
Please help. THANKS...shidoobie wrote:
My input source is a Tascam US-144 USB Interface that has 2 mic in's, and 2 line in's for guitar/bass.
I would like to separately record each input on different channels simultaneously.
You might also want to check out the M-Audio NRV10, which is a hybrid analog mixer + firewire audio interface (with I think around 10 simultaneously available separate channels), which makes it very "band friendly" for both rehearsal and recording. -
How do I add more songs to my slideshows in elements 11?
How do I add more songs to my slideshows in elements 11?
Welcome to the forum.
However, this is the Photoshop>General Discussions forum, and does not cover either Elements program, Premiere Elements, or Photoshop Elements, or their Elements Organizer.
If you can please let us know exactly which of the Elements program you are using (either Premiere Elements, or Photoshop Elements, through the Elements Organizer), a MOD can Move your post to the appropriate forum, where you will get quick answers.
Also, additional music can be Imported into several of the Elements programs, but knowing exactly which you are using, will dictate the instructions.
Good luck, and please let us know more.
Hunt -
How can I add more memory to my iPad?
How can I add more memory to my iPad?
Memory refers to RAM, and can't be increased.
I asume you mean storege space (like 16GB, 32GB, etc). It also can't be increased.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Cheers, Tom
Maybe you are looking for
-
Problems with static IP from TP-Link Access Point
Hello Guys! I'm new with Apple - i got a Macbook Pro Mid 2012 since 2 weeks. Everythings running fine and im really happy with the Macbook - except of the Wifi. I have the problem that the internet connection is just working temporarily, sometimes it
-
How to store as single record data coming from different ods to cube
Hi All, we have the scenario like . Same contract values are uploaded from 3 ods to cube.In the cube this information is stored as 3 different records. Is there any option having same contract no and same fiscal period values should be stored
-
Firefox 9 for Mac cannot play quicktime content
Firefox 9 for Mac cannot play quicktime content on a Lion 7.3 system. Firefox displays a message that a plugin for quicktime is needed, but cannot find one. Please advise. Thx
-
I assume ACL is "access control list". I have seen in mentioned in only a few places and nowhere have I seen any significant documentation about them. Are they create when you grant access for any item?
-
Hello, I am in a situation where I need to pass unique information of Publisher Item to a Remote application (and from this remote application server, i need to get the reference to Content Item using UUID). Is there any way, thru which i can access