How do I add multiple tickets under the same confirmation number from the American Airlines app to Passbook?

I have a confirmation number from American Airlines for a flight with my family all under my name and for some reason I cannot add all of our tickets to Passbook. To clarify, I went to the American Airlines app and put in the confirmation number along with my name which pulled up my boarding pass only. Although I was able to add this boarding pass to Passbook, I was not able to add any of the other boarding passes for my children to Passbook that should have also been under the flight reservation. In fact I couldn't even see them in the American Airlines app. I tried to use their names and the same confirmation number but nothing happened, and nothing else seems to be working. How can I add all of these boarding passes to my Passbook?

Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys.

Similar Messages

  • How do I "save tabs and quit" in this new version of Firefox, as I did in the older version? I want to be able to see the same websites open from the last time I closed the computer.

    In an earlier version of Firefox, when I went to close it, I would get a prompt "save tabs and quit?" that allowed me to see the same websites open from the last time I closed the computer. Where is that feature on the new version of Firefox?

    Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
    Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs.<br />
    You can use "History > Restore Previous Session" to get the previous session at any time.<br />
    You may need to click the orange/gray Firefox button to see History.<br />
    There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
    Using the "Show my windows and tabs from last time" setting is a more reliable way to restore session data.
    * [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • Why some emails sent with OS X Mail is not delivered, and if I send the same e mail from the website of my hosting provider, to the same recipients, they are delivered?

    Sometime, when I send an email with my Mac Book Pro, i receive the message:
    Hi. This is the qmail-send program at smtplqs01.aruba.it.
    I'm afraid I wasn't able to deliver your message to the following addresses.
    This is a permanent error; I've given up. Sorry it didn't work out.
    But if I try to send the same messagge, at the same email address, from the web site of my hosting providere, ther are not problem...
    Someone can help me?
    Thanks!!!

    Could be a number of things, among them the fact that the recipient's inbox is full, or his/her ISP email server is a bit slow at hand-shaking with yours, and this of course can vary depending on the fact that the recipient's account is IMAP or POP.
    When you send an email from a webmail, the grunt work is done by the SMTP server, and it's up to it to manage the multiple requests, their number, their frequency, their routing, etc... When you send an email from your Mail app, it'll send it once to your SMTP server, who'll process it a certain number of times before giving up, but you'll receive only one failure message.
    If the recipient's an Microsoft Exchange account, you must know that those servers sometimes send and receive email in bulk, and at a variable refresh rate, hence the "Sorry, your email couldn't be distributed...".

  • How to delete the duplicated songs at the same time also from the source , hd

    i have lots of song twice or tripple in the song list. the main reason is i have them also in the source hd dupplicated. It is not easy to find the dupplicated songs in the hard disc, they are in different files with different names but same songs . ı have to delete them by checkin the files each for every duppliceted song it is not possible practically.
    but in i tunes i see them all in a list and can delete. but they will still be in hard disc. If for any reason i have to reload the files to  itunes, they come again and i have to start form the zero point.
    i want to delete them at the same time when i am deleting them on i tunes library.
    this options is available on windows media player. there is always an option when i delete a song the software asks '' delete only from the list or also from the source? ''
    is this optian available in i tunes ?

    Ting,
    Try this:
    Insert a group on body_code.  Then create a running total called Distinct Count.  Field to summarize -> ID, Evaluate on change of group Group # 1 Body Code, and Never Reset.
    Then insert a chart in the report header:
    In the advanced layout, select body_code on change of and select Distinct Count running total in the Show values.
    I hope I understood what you're looking to accomplish.
    Z

  • How do I add multiple information under an user account?

    David, Thanks for all your help and I'm almost finished.  Hopefully this will be the last item.  I have users that register and then go to a profile page.  I need them to be able to recieve multiple messages and also input multiple scores.  I figured out how to do this but with only them being able to add one of each (its stored in the database table).  How can store multiple items for each user (with users continuing to increase)?  It's almost like I need a table for each individual user...

    Thanks, but I will proceed.  So getting back to my question...I figured that I needed a new table which I have.  I also set up a user page based on the session MM_Username and that is working fine.  I have 8 users in and everything is working fine on that end...that isn't the problem.  I used the insert command to insert all data/foreign key into table2 that I needed.  I need to be able to display a set of records from (table2) and when I try to use the MM_Username to filter that table, it doesn't work.  My understanding was that when a user is logged in, the session for each page is MM_Username so if the tables are set up with the same information, why doesn't it work?  I also inserted the table in the main loggin page and it actually does pull up the information, but even though I have the "repeat region command" it only shows the first record...it does however pull the first record for the logged in user.  But doesn't work at all on another page.  Please help.

  • How can i add multiple photos to an imovie at once from my ipad?

    I am trying to create an imovie of photos that I have stored on my ipad using my ipad. It is only letting me add one photo at a time which is taking way too long. Is there a way to add multiple photos at once? Also, can I apply changes (like removing the Ken Burns effect all at once from all of the pictures? Hopefully I dont have to do it one at a time or it will take waay too long!
    thanks

    When creating a new email, open the Photos app.
    Select the Album.
    Tap Select.
    Select the items desired.
    Tap the Sharing icon and select Mail.
    Create the email.
    When replying to an email, it is not possible.

  • Trying to find the Network Activity number from the CATSPS table

    Hi Experts
    I am trying to build a report to show unprocessed time on Network Activities. The time is entered via CAT2 and transferred to CATSPS via the CATA job.
    Once the data hits the table, an internal system number is given to activity.
    I have the following example:
    Say I have three Network Activities all linked to the same Network and WBS as follows:
    Network   Activity #
    43000121  0001
    43000121  0002
    43000121  MTS
    When I post time against the 2nd and 3rd NWAu2019s, CATSPS has the following entries:
    RNPLNR               RAUFPL                RAPLZL
    000043000121    0000000182         00000002
    000043000121    0000000182         00000003
    Now the RAPLZL field has no visual link to the NWA.
    Does anyone know of the Internal table that holds the link between the RAPLZL field and the Activity that is represents.
    I have already looked at PLPO (no entries).
    Any other suggestions would be appreciated.
    Thank you in advance

    Match the entries RAUFPL, RAPLZL of CATSPS with AUFPL, APLZL of AFVC table, you will get the activity number(VORNR)

  • How to find out the schedule agreement number from the invoice number?

    I have invoice number based on which i need to check the scheduleagreenment number
    please let me know in which table i can find the relation between these two.

    Check EKBE and EKET , EKEK

  • HT201317 how can I add multiple photos to camera roll

    how can I add multiple photos to camera roll

    If you mean from photo stream, open your photo stream album on your phone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll.

  • How to get page number from the PDF using Javascript

    Hi,
    We are having list of Single page PDF. The pdf are named in the order,
    ISBN_Author_01.PDF  (with real page number as i)
    ISBN_Author_02.PDF  (with real page number as ii)
    ISBN_Author_03.PDF  (with real page number as iii)
    ISBN_Author_04.PDF  (with real page number as 1)
    ISBN_Author_05.PDF  (with real page number as 2)
    ISBN_Author_06.PDF  (with real page number as 3)
    ISBN_Author_nn.PDF  (with real page number as 500)
    Here each pdf has a page number and in sequential order.
    The task is to check whether all the pdfs are in sequential order (i.e i, ii, iii, 1, 2, 3). If any page is missing, the script should throw an error report.
    To do this task, I am writing a Javascript to get the real page number from the PDF.
    Can anybody help me how to get the page number from the PDF using Javascript.
    Thanks,
    Gopal

    The "real" page number within a PDF is the count of the physical page starting at 0, zero.
    pageNum numPages
    The number printed on each page is the page label.
    setPageLabels  getPageLabel
    You will have to open each PDF and your script would need to know the page label for that file. I would expect you would need to build a 2 dimensional  array of the file names and the page label for the page within that array.

  • How to fetch the VAT registration number of the ship to party from billing

    Dear SDN Team
    How to fetch the VAT registration number of the ship to party from the billing document.  Can you proide some information for fetching the VAT registration number of the ship to party.
    Normally only the payer VAT registration number will be displayed in the Invoice.  But in my case the Ship to party VAT number is displayed. 
    I have resolved this problem by doing the customizing setting in order to have the payer vat registration number.  But for the Old Billing documents it is more than 30,000 documents where it was printed with the ship to party VAT number.  So i need to identify those documents.
    Can you please help to resolve this problem.
    With Regards,
    Jai

    Hi,
    To get VAT from the ship to from Billing, You have to first fetch the BILLING NUMBER from the VBRK and then goto the Document flow in VBFA to get the SALES DOCUMENT NUMBER and with sales document you will get the SHIP TO number from the VBPA with the PARVW = SH
    Once you got the SHIP TO , then goto the KNA1 and get the VAT ID in the field STCEG
    so the logic will be as follows
    VBRK---VBELN and then
    VBFA--VBELN with the document Category as C
    VBPA-VBELN and get the  KUNNR with PARVW =SH
    Now with KUNNR ( ship to ) get the VAT ID from KNA1-STCEG
    regards,
    santosh

  • Spool no. not generating for the same shipement number

    Hi,
    I am working on shipment related forms. When i give the print of one shipment no., all the forms are going to one spool number. But my problem is when i take the same shipment number from second time onwards then all the forms are getting appended to the same spool number instead of creating a new spool number.
    For example my shipment no.:- 1277489 contains 8 pages, when i take the same shipment no. for second time all the 8 pages getting appended and total 16 pages are going to that same spoll no. For third time 24 pages and 4th time 32 pages and so on... in the same spool request.
    I have debugged the driver program, but i din't get any solution for that. So can any one suggest me of how to resolve this issue.
    Thanks & Regards,
    Ramana

    Hi,
    After selecting the print option, the print pop window appears. In that select the option New Spool Request.
    Then give the print, it will come on new page.
    You can also pass this option in the print program also. Pass TDNEWID = 'X' in parameter OUTPUT_OPTIONS.
    Regards,
    Vinod

  • Generating next number from the SQL database using java

    Hi friends, I have a problem and need your help. I am working on a project about submitting claims form through the adobe PDF file and SQL database. I have problem working on a web service (written in java) that will generate the next Invoice Number from the SQL Database table. The field type for the column is text(var char). *Example: I first need to get into the table and search for the last Invoice number in the table and if the last invoice number in the table from the database is 3, i would want to generate the next number which is 4 and filled it up in the PDF file through web service that i am implementing. Can you all provide me some guidelines on how to implement this method in my web service?
    Thanks a lot. I need it by today. Hope someone can reply this as soon as possible.
    Lim89
    Edited by: LIM89 on Apr 2, 2008 7:10 PM

    far simpler to use a sequence generator, which most databases support.
    Suggested method to get the max value in the column is NOT secure, unless you lock the entire table for update before you do so, which is a severe performance penalty.

  • How can i add two values under the same property?

    Hi all,
    How can i add two values under the same property name in a
    prop list? For example:
    [question1: "item1","item2", question2: "item3","item4"]
    To be more precise, i am creating a property list and I want
    whenever a two values have the same property name to be added int
    he list under the same property. For example:
    gMyList.AddProp (#""&question&"" & x,
    member("input").text)
    question is a variable that is updated fromt he user's input.
    Now, whenever somethign like this happens:
    question = "question1"
    member("input").text = "five"
    question = "question1"
    member("input").text = "six"
    I want to output list to be:
    [question1: "five","six"] and so on
    Any ideas?

    Maybe you could make each property a list (so you have a
    property list full
    of lists), and add multiple values to the list held in a
    particular
    property?
    Cheers
    Richard Smith

  • How can I save multiple titles under the same DVD?

    I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
    Is there a way for me to do this, or am I chasing phantoms?

    *This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
    Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
    If you use versions like this often and wish to have only one master then you can do this with Aperture.
    Regards
    TD

Maybe you are looking for

  • Using a Canvas in a Panel

    Im doing a programming project for uni, and I need to know how to use the Graphics class, even although we have never covered it. The task is to create a game of hangman, and I am fine with every aspect of the program except when it comes to showing

  • Re: purchase order change

    HI Waqkas here, in BUS2012 if pO is released i m using event Releasestepcreated event, its working fine But if any one rejecgt it through Workflow n after that if if v released it againt BUS2012 event releasestepcreated not trigged, which event is tr

  • Request for cookbook on Mobile SERVICE Application

    Hi, I've been trying to get some technical docs for Mobile SERVICE, but I couldn't. I'm new to Mobile Service CRM, and have just started to support CRM mobile client SERVICE application. I have downloaded some related documents from SAP, but if you h

  • Problem in XL reporter

    Hi While installing XL reporter i m getting following error.... .NET Framework 1.1 needs to be installed for this installation to continue But in my server .NET framework 2.0 is already installed. XL reporter ver: 6.80.01.30 BUILD_DATE: 201107_110300

  • Clarification on BT Broadband 12/18 month contract

    Asked our company Lawyer who told me once you have completed your one year contract you have fullfield your obligation TO WHOEVER and they don't have the legal right to impose another contract without contacting you first. Broached this subject with