How do i add my podcast to more than one category?

My podcast is listed as "performing arts", but it actually falls into three different categories: society and culture, education, and, yes, performing arts.  How do I get it to show up in all three categories--or is that possible?

Your tags read
<itunes:category text="Arts" />
<itunes:category text="Education" />
<itunes:category text="Society &amp; Culture" />
So only the main categories and no sub-categories. So the Store is showing 'Arts' (it can only show the first category) and as you haven't chosen a sub-category it's picked 'Performing Arts'. If you want something different you will have to add a sub-category - those available are Design, Fashion & Beauty, Food, Literature, Performing Arts, and Visual Arts. You can't correct the XML directly in Blubrry, you will have to use its provided method for adding the sub-category and I'm afraid I can't advise on that.
Similarly with the other two categories, the available sub-categories are listed at the bottom of
http://www.apple.com/itunes/podcasts/specs.html
However these will not appear on the Store page and as I indicated above it's most unlikely that anyone searching within them would find your podcast.

Similar Messages

  • How can I enter my podcast in more than one category?  Mine covers arts, education and society and culture, but is listed as "Performing Arts".  Thank you for your time!

    How can I enter my podcast in more than one category, to reflect the fact that it covers arts, education and society and culture?  Thank you for your time!

    You can have more than one category - this page shows you how the tags are formed:
    http://www.apple.com/itunes/podcasts/specs.html#category
    The Store will list only the first category and its sub-category at the top of the page. Like the first category, the others will in theory make your podcast available for searching by category. However searching just on the category in the iTunes Store is most unlikely to throw up your podcast. There are thousands of podcasts out there, and it would be quite impossible to display on one page the entire list for any category. What you see are 'featured' podcasts, chosen by Apple as being special; please see this Tech Note:
    http://www.apple.com/itunes/podcasts/specs.html#getfeatured
    Note that there is no way you can influence the selection other than making your podcast really special.
    If you have further questions about making your podcast it's better to ask them in the Producing Podcasts forum.

  • Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

    As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
    But can we do that as below:
    add supporting details for more than one cells at the same time?
    I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
    I wonder if i am not with the right version, because i don't know how to get the below.
    Can any one explain?
    Thank you.

    Hi,
    I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
    You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
    You can add these details and then submit the data in the form.
    Regards,
    Sourabh

  • How can I sort a table using more than one column in Numbers or in Pages?

    How can I sort a table using more than one column in Numbers or in Pages?

    Hi Ron,
    On the right side of the Toolbar click the Sort and Filter button, then select Sort.
    You can then set up a multiple column sort.
    Click Add A Column, Specify the sort for that column, Repeat.
    Jerry

  • How can i use Itunes to update more than one IPad with more than one owner

    How can i use Itunes to update more than one IPad with more than one owner?  I own an IPad and my wife owns an IPad.  I want to use my system to update both IPads.  We have different Apple Accounts and different applications.  Is this possible?

    Of course, that is too easy.  I am such a bonehead.

  • How can I change all of (or more than one) speaker note to a voice at once?

    Hello... 
       I have a lot of speaker notes that I need to apply a specific voice to.  How do I apply the same voice to all of the speaker notes in the whole project at once?  Or at least more than one?  Any help would be appreciated.  Thank you!   I am working with Captivate 6.

    Hi Vikram,
      Thanks. That tip definitely helps!  You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices.  If you do that, then the drop down box becomes “unclickable”.  Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
    Ryan
    Von: VikramGaur [email protected]
    Gesendet: Donnerstag, 20. September 2012 16:25
    An: Scharfer, Ryan
    Betreff: How can I change all of (or more than one) speaker note to a voice at once?
    Re: How can I change all of (or more than one) speaker note to a voice at once?
    created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

  • How Do I Share My Database Between More Than One User Account on the Same Mac?

    How Do I Share My Database Between More Than One User Account on the Same Mac?

    How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

  • How to read an internal table with more than  one (2 or 3) key field(s).

    how to read an internal table with more than  one (2 or 3) key field(s). in ecc 6.0 version

    hi ,
    check this..
    report.
    tables: marc,mard.
    data: begin of itab occurs 0,
          matnr like marc-matnr,
          werks like marc-werks,
          pstat like marc-pstat,
          end of itab.
    data: begin of itab1 occurs 0,
          matnr like mard-matnr,
          werks like mard-werks,
          lgort like mard-lgort,
          end of itab1.
    parameters:p_matnr like marc-matnr.
    select matnr
           werks
           pstat
           from marc
           into table itab
           where matnr = p_matnr.
    sort itab by matnr werks.
    select matnr
           werks
           lgort
           from mard
           into table itab1
           for all entries in itab
           where matnr = itab-matnr
           and werks = itab-werks.
    sort itab1 by matnr werks.
    loop at itab.
    read table itab1 with key matnr = itab-matnr
                              werks = itab-werks.
    endloop.
    regards,
    venkat.

  • How can a file be accessed by more than one app?

    Hi,
    I am new to iOS4 and the whole iPhone, iPod technology. I am really a windows user.
    How can a file be accessed by more than one app. In my case I want to transfer a midi file from my PC to my iPod Touch and be able to open it from a couple of Midi Players which I am evaluating - or does each Midi Player have to import the file seperately for its own use?
    Thanks,
    Sam

    It seems to me that what you want is exactly a session bean will do. The EJB container is responsible to maintain a certain number instances (configurable) of your session bean and serve multiple clients at the same time. Session beans are not necessarily destroyed after serving a client. If you configure your ejb server to have a pool size of 2 to 100, then you will always have at least 2 instances (no more than 100 even there are a lot of client access) of this ejb ready to serve. The only thing not clear to me is that do you want to use only ONE instance of this bean or you don't care as long as multiple clients can access this bean's service? Since you mentioned that there is not a real database access, you can certainly use a Singleton but a 'regular' session bean with static fields should do it also if these fields will not be modified by clients.
    PC

  • How to delete a page without deleting more than one

    how to delete a page without deleting more than one in pages

    Hi alldogsgotoheaven,
    Method 1.
    Menu > View > Show Thumbnails
    Click on a thumbnail.
    If it shows a yellow border around all the pages, they a part on a single section.
    Click in your document at the beginning of the page you want to delete, and Menu > Insert > Section Break.
    Insert another Section Break at the end of that page.
    The page is now isolated in its own section and you can delete its thumbnail.
    Regards,
    Ian.

  • How do I broadcast a wedding to more than one person?

    How can I broadcast a wedding to more than one person at a time?

    I missed your 2nd question.
    This article explains how to always show remote content and the risks of doing so. You can make that call. Adding your trusted senders to your address book will allow content from them and is the recommended action.
    http://kb.mozillazine.org/Privacy_basics_(Thunderbird)

  • How can i use my iphone with more than one itunes

    how can i use my iphone with more than one itunes

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • TS2083 How do you know if you have more than one graphics card installed?

    How do you know if you have more than one graphics card installed? My MacBook Pro does not provide a connectivity to TV via HDMI.

    You can go to <http://support.apple.com/specs/#macbookpro> find your Mac's technical specs.
    Depending on what kind of video output port you have, you should be able to get an adapter to HDMI.  For example a Mini Display Port to HDMI (I have one of these).

  • How do I share my contacts with more than one group? I really don't want to have re-type them into a different group. Help!

    How do I share my contacts with more than one group without having to re-type them into each group?

    Without "pretending" to be yourself on the other phone (change settings) there's nothing else you can do.
    iOS devices are meant to be single user and can't view iCloud.com the same way a Mac or PC can do.
    You need to find a desktop or laptop machine (Mac or PC) to log in at iCloud.

  • Display column values as a series/legend on a line chart where one column value can be more than one category

    Hi Everyone
    I don't know if this is possible or not, so I will describe it. I have a column in a table called Filing. There are currently three values in it ("Abuse", "Neglect", "Voluntary") and each record has this populated. I also have
    the below slicer for the column also.
    I would like to add a fourth value called "Abuse/Neglect" that would identify instances where both an Abuse and Neglect petition was filed, which is a subset of the Abuse and Neglect records in the Filing column.
    My question is, is it possible to create a line chart that has the 4 Filing possibilities: "Abuse", "Neglect", "Voluntary", "Abuse/Neglect" as the Series/Legend in the line chart?
    The problem is that there are records that are more than one category: Abuse or Neglect records can also be Abuse/Neglect.
    Paul

    Hi Paul,
    According to your description, there is a column with the values ("Abuse", "Neglect", "Voluntary") in your table, now what you need to is that add another value "Abuse/Neglect" in this column, and then use it
    as Series/Legend in the line chart, right?
    In this case, you can add calculated column to your table based on your logic. A calculated column is a column that you add to an existing PowerPivot table. Instead of pasting or importing values in the column, you create a DAX formula that defines
    the column values. The calculated column can be used in a PivotTable, PivotChart, or Power View report as you would any other data column. Please refer to the link below to see the details.
    https://msdn.microsoft.com/en-us/library/gg413492%28v=sql.110%29.aspx?f=255&MSPPError=-2147217396
    Regards,
    Charlie Liao
    TechNet Community Support

Maybe you are looking for

  • Multiple Nanos in Family one Nano update download?

    When ever a new version of the nano software comes up each sync takes awhile because it has to download the 54MB updater for each of my families memeber nano. Is there a way to have the download happen only once and yet update each individual nano wh

  • Can I "sync" my websites on more than one mac?

    Hi, I have iWeb installed on my iMac and on my Ti Book. I have built some sites on both computers. I need to work on those sites using both machines How can I sync those sites on both computers? W.

  • Arabic and Hebrew sections of a .pdf document

    I need to rearrage a .pdf that contains Arabic and Hebrew pages. Acrobat will not allow the Arabic pages to be placed anywhere but at the end of the document. I am using Acrobat 7 on a PC with PC InDesign CS3 documents as the source. Any hints or sug

  • Correlation condition in Aggregate Pattern

    Hi Team, Just Started the Aggregate Pattern and My Requirement is to collect the 3 messages of Pencils based on their color(should be same for three messages) Below is My pattern: Start: I have initialized the Counter to zero CurrentPencilID is of ty

  • Content types, Required site columns, How are they supposed to work?

    Hi, I have 2 issues: I created a Folder level content type with many Required site columns. I was hoping that when I create a new folder the new content type screen will pop up and I must enter all the required properties (metadata) for this new fold