How do I add photos to iCloud Photo Library?
Hi All,
Hoping for some help as I'm at a loss.
So iPad and iPhone, both upgraded to ios 8 last week and thought I would take advantage of the new iCloud Photo Library. Works great, I take a photo on my phone and it automatically catalogs it and appears on my iPad via the iCloud Photo Library.
Now here's the issue, how do I add photos to my library from my computer?
If I plug either device in and load up iTunes, select my device and click on the Photos tab, I am told the following:
iCloud Photos is On
**********'s iPhone can access photos in iCloud. Photos can be downloaded to your device via Wi-Fi or mobile network.
I rang Apple Support who kindly told me that I had to disable iCloud Photo Library on my device so that I could then sync it with iTunes, then re-enable it again so it would merge the two. This all worked up until re-enabling iCloud Photo Library which prompted me to delete all the photos I'd just synced.
So now I'm at a loss, how do I get photos on to my iPad now that I have this nice new feature enabled? All I want to do is make sure all my photos are in the iCloud library.
Thanks
bump
Similar Messages
-
How can I add photos in the Camera roll to My photo stream if they were taken prior to icloud being activated?
You have a couple of options:
Open the photos one at a time and take a screenshot. This will add a new low resolution copy of the photo to the camera roll, which will then upload to your photo stream;
Email the photos one at a time to yourself, then save the attached photos to your camera roll. This will add a copy of the photo at full resolution to your camera roll and upload to photo stream;
Use an app like PhotoSync, which will allow you to wirelessly transfer copies of all your old photos to your computer all at once. Then delete these photos from your camera roll and use PhotoSync to transfer them back from your computer to your camera roll. These will be the original resolution and will upload to your photo stream. (You need an app like this because iTunes will not transfer photos back to your camera roll, where they must be in order to add to your photo stream.) -
HT4890 How do I add photos from my computer to icloud?
How do I add photos from my computer to icloud?
If you are using windows an have iCoud installed, then just copy them into the "upload" folder that ist set in iCloud settings (open iCloud to check which folder it is). The files in this folder will be uploaded to your photostream
-
How can I add photos from Camera Roll to the Photo Stream album?
How can I add photos taken during the past month from my Camera Roll to the Photo Stream album?
Hi,
It's easy to do in iPhoto11 (click on a photo in iphoto and select share in the bottom right corner, then select Photo Stream), I'm not sure you can do this on the iphone.
Regards
Keith -
How do i add photos in my Ipod Video?
How do i add photos in my Ipod Video and View them?
Can you just open your ipod like a hard drive and put photos in the folder named Photo
You need to let iTunes handle the transfer in order for the pictures to be viewable on the iPod. iTunes creates specially sized preview images and organizes the pictures & previews as it does for music files. If you put the pictures on manually through Windows Explorer and the iPod hard disk "interface", then you can retrieve the pictures on another computer. But the pictures won't display on the iPod. -
How do i add photos to my ipod
how do i add photos to my ipod without losing photos that already exist on the ipod but not the computer?
thankshow do i add photos to my ipod without losing photos that already exist on the ipod but not the computer?
Well, If you've deleted the photos off your computer, then when you connect your iPod, they'll probably be automatically deleted off of it.
Try this, though:
Open iTunes.
Go to "Edit -> Preferences -> iPod". Without the iPod connected, it should say "No iPod connected". Leave this Preferences windows up and running; I believe this may prevent iTunes from seeing your iPod as a connection.
Then, if you want to copy photos from your iPod to your computer, then see these programs:
iPodPhotoCopy
CopyPod Photo
Then, move those photos that you have transferred to your computer to a new folder, for example. Name the folder, then add the other photos that you previously were wanting on your iPod into this new folder.
In Edit -> Preferemces -> iPod -> Photos, select this new folder to sync to your iPod ("Browse" for location).
I hope this helps,
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards! -
How do I add photos to my camera roll that were not taken one my iPad? I have iMported photos from my camera to my iPad. Theses photos are in the imported photo album. I want to move these photos to my camera roll but can't figure out how to this. I want them in my camera roll because that is the album that syncs with Dropbox where I want to backup my photos. Thank you for your help.
Consider using sshfs to mount your Pi from your Linux boxes. It's much easier to configure and manage than samba. It sounds like you already have your Windows machines mounting your Pi so Samba is doing its job in that respect.
More info on sshfs in the Wiki: https://wiki.archlinux.org/index.php/Sshfs
To help get you off the dime, here's a modified line from my fstab that I use to mount my Pi with:
gav@PI:/mnt/backup /mnt/rpi/backup fuse.sshfs rw,relatime,user_id=0,group_id=0,allow_other 0 0
Subsitute my mount points with yours.
For a password-less mount:
ssh-copy-id gav@PI
after you've set up ssh and generated some keys on your client box.
Here are some relevant lines from the smb.conf file on my Pi that I use for my one Windows box in the house that might help you with your write permissions:
security = user
hosts allow = 192.168.1.0/255.255.255.0
guest account = gav
; And my share setup:
[rpi]
comment = Public Stuff
path = /mnt
writable = yes
; printable = no
; write list = @krb
[torrent_dl]
path = /mnt/video/torrent_dl
writable = yes
create mask = 0770
directory mask = 0770
guest ok = Yes
case sensitive = No
read only = No
Hope this helps. -
I have uploaded photos from my brother's camera while on vacation to my iPad (1). Now that I wish to add even more photos to the iPad, iTunes say that it will replace all the photos once I sync again to add from an album on the iMac.
WHOA.
I'd like to upload the photos to the iMac! HOw can I do that?
How can I add photos from albums on the iMac and not lose the ones I currently have stored onthe iPad.
I cannot find this task addressed in any Help reference.
I do not understand why I cannot make a simple file transfer back and forth.
Many thanks!Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
Cheers, Tom -
I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?
Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.
-
How do I add photos in photo stream.how do I
How do I add photos to photos team?
You can't. (We can't have people going around “deleting things”.)
You can do a reset. So it's all or nothing.
But once 1,000 pics are stored in Photo Stream, every time you take a new pic, the oldest one will be deleted. -
How can i add photos to my favorites
how can i add photos to my favorites contacts
It's all in the manual: http://manuals.info.apple.com/en/iphoneuserguide.pdf
-
How can I add photos to my iPhone?
How can I add photos to my iPhone 3GS? I used to do it on my 2G, now I can't seem to remember how.
It's all in the manual: http://manuals.info.apple.com/en/iphoneuserguide.pdf
-
Simple question - How do I add photos to the body of my emails . But instead of the answer - Found 1000 results for How do I add photos to my emails for Thunderbird. There are answers that don't apply at all to the question in anyway. Why does it have to be so hard to get a simple answer to a simple question?
Thunderbird is acting much like Microsoft, the every reason I dumping MS Live Mail.First of all, much help for Thunderbird refers to menus which may not be visible. It would help you and us if you have your menus and toolbars visible.
http://chrisramsden.vfast.co.uk/13_Menus_in_Thunderbird.html
So, open a write window. Enable its menu and toolbar(s).
Now do you see an "Insert" option?
If not, you may be set to compose in plain text, which does not support embedded images.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Account Settings]|{select account}|Composition & Addressing''' and ensure "Compose messages in HTML format" is ticked. If it wasn't already ticked, go back to composing a message. Any better now?
Once you have HTML composition mode going, you can use '''Insert|Image''' or various permutations of copy-and-paste and drag-and-drop into your message body.
A manual, of sorts: http://en.flossmanuals.net/thunderbird/composing-messages/ -
how do i add photos to the photo array when creating a book using iphoto 8.1.2? the book doesn't accept the albums and foldlers i drag and drop.
I'd suggest you ask this question in the iPhoto forums:
iPhoto
Posting here is unnecessarily limiting the people who'll see your question to those running iMacs.
Regards. -
How can I add photos to a video without interrupting the sound of the original video?
In PE11, How can I add photos to a video without interrupting the sound of the original video?
RLHeflin
Thanks for getting your details posted. Good job.
You further explained
I am simply wanting to “overlay” a new visual element without disturbing the underlying audio.
A classical way to do a Premiere Elements Overlay is to hold down the Ctrl key of the computer main keyboard and drag the new clip over the area of the one you want to replace on the Timeline. That should not do anything but replace one portion of the video on the Timeline. No change in duration video or audio track if you are dealing with video linked to audio.
If you hold down the Alt key of the computer main keyboard, I am envising a scenario where you want to add to (not replace) some Timeline content.
A just in case note, if you have video on Video 1 and 2 and the video in 2 does not have transparent areas in it, then all you will see is the Video 2 content. I believe that Hunt eluded to that concept as a possible technique for what you might be doing.
Another just in case, if you have not seen the following Adobe documentation on arranging clips, you might be interested in the following link
http://help.adobe.com/en_US/premiereelements/using/WS9B8F8208-EAE8-4b49-A79B-9479B46A8981. html
Please update us on your progress when you get a chance.
Thank you.
ATR
Maybe you are looking for
-
ELECTRONIC SIGNATURE DEVICE FOR TAX AUTHORITIES (TAX REGISTERS)
Many countries today have special laws in place that make it obligatory for anyone who is selling goods or services to consumers to use approved by the tax authorities cash registers that have special security features that enable the authorities to
-
Why I have to "sudo rmmod iwl3945 | sudo modprobe iwl3945" when start.
my iwl3945 dosen't work if i not "sudo rmmod iwl3945 | sudo modprobe iwl3945" first when I start the dmesg |grep iwl3945 results are following sda: sda1 sda2 < sda5<6>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.
-
Can a factory unlocked iphone 3gs become locked after the 5.1.1software update
can a factory unlocked iphone become locked after software update
-
Freight units / Deliveries with zero quantities in TPVS
Hi Gurus, we are prototyping TPVS optimizer but facing one problem of zero quantity for freight units in Transfer orders to OLTP / OLTP generation of deliveries. Reason in the log says requested quantity not completely available but there is plenty
-
Destination volume for Reader 9
How do I get a destination volume to appear in step 2 of installation of Reader 9 on mac intel using firefox?