How do I add titles to a completed movie?

I am new to imovie. I have imported a completed movie in MP4 from my previous PC. I can only add a title to the beginning of the movie,  but would like to insert section titles, but since all the clips have been joined, any attempt to insert such a title, goes to the beginning of the movie. Any suggestions?

If you select a title (yellow border) you can drag it anywhere in your timeline.
Geoff.

Similar Messages

  • How to again add workflow to workflow completed list item?

    Hi All,
    How to again add workflow to workflow completed list item?Thanks!

    Hi,
    According to your description,my understanding is you want to add a new workflow to the completed list item.
    a) If yes, then you need to follow the same process attaching the workflow to the list/library and while deploying the workflow you should  select  the option "Allow this workflow to be manually started.......".
    Go to the workflow completed list item  and start the workflow which was created newly in the above step.
    b) If your query is want to restart the same workflow for completed list item then,
    You need to go to the workflow completed list item-->workflows-->start/click on  the workflow again.
    To do this, you might have selected the option "Allow this workflow to be manually started......." while attaching the workflow to the list.
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ******************************************************************************************
    s p kumar

  • How can I add a library of flash movies to my site?

    I posted this same question on the Dreamweaver forum and a suggestion was made that I try over here for help, so please excuse the duplicate question.
    How can I add a library of flash movies to my site?
    Hey there everyone and thanks for reading my question.
    I have a library of flash movies (specifically a library of maps) and when the map movies are run in Flash they call each other just fine (i.e. the USA map will load the Georgia map when Georgia is clicked on the USA map, etc etc etc for each state).
    HOWEVER, when I insert the USA map in one of my site pages (I'm working on the site using Dreamweaver CS4) the USA map page will load, but when a state is clicked the area on the page for the map goes blank and the state map does not load.
    Short of coding a specific path in each of my state maps (in the Flash editor) is there a way to tell Dreamweaver there is a library of maps, look there for the sub-map?
    and if I do have to code the path to the map, can I code a relative path rather than a specific URL address for the maps?
    I know this is probably one of those simple things, but I'm not seeing it (can you tell I'm new at this??)
    Thanks in advance for any help!
    Frances

    Hey again,
    Thanks for the helpful suggestions. Everyone's comments got me to thinking about what the path was in the calls from the maps.
    here is what finally worked:
    on (release)
    loadMovie("../FlashIMapDownloads/georgia.swf", 0);  
    this script code is in the action script for the "georgia" button of my main map - a US Map. (I hope I'm describing all this correctly).
    I'll post this same info in the Dreamweaver forum too.
    Thanks again!
    Frances

  • How to re-add title to question

    If the title of a question slide is removed, is it possible to re-add it?

    Rod, why wouldn't a typical Text Caption object work?
    Cheers... Rick

  • How do  I add title-cover-pictures to the albums I have ????

    Hi
    When using windows Media Player, y can easily add cover pics. But in iTunes I cant find any logic way to do it. It says I have to log in to the store before I can do it.....But I dont have Visa and I dont want to buy anything.
    Is there a button somewhere to push-as in windows media player ???
    Yours monsterblaster

    You can add artwork manually by embedding the artwork into the music file: iTunes 7 for Windows - Adding artwork to songs and other items
    I find this site is a good source of artwork: CD/Album Cover Art Search from SlothRadio.
    Another place for finding suitable artwork is to go to Amazon. You can also locate artwork using Google image search and put the artist or album name. Locate the album from any of those sources, save the picture to your desktop and drag it to the iTunes artwork pane. Alternatively there are programs like these that help locate artwork: iTunes Art Importer or MP3 Tag

  • How can I add titles to a slideshow?

    When I do a slide shows using iPhoto 6 I would like to find a way of adding titles to the individual slides as it can be easy done in iMovie. Thus far I wasn't be able to find an intelligent way to do it. In the slideshow settings titles can be added but they appear in black at the edge of the slides and there is no way to change the font sizes, colors, or location on the slide.
    Does anyone have any suggestions on what I should do ? Any help will be greatly appreciated.
    Frank

    Use iMovie for the job. There is no way to customise the display on iPhoto.
    Regards
    TD

  • How do you add cue points to a MOV file that Director 12 can read?

    I have just downloaded the Trial of Director 12 - and unless I can add cue points to video that it can interpret - I am not going to be able to achieve what I need to.  I've spent the last day and a half looking over the scant documentation provided by Adobe, and anything else I could find online - but the only answers that came anywhere near were for old versions using discontinued xtras.
    Please can anyone help? - I am using Windows 7 64 bit - CS6.
    Thanks in advance. :-)

    Probably too late for your project but...
    You can do this by using 3 sprites in addition to the SWF. In this example, I've named them "videoPlay", "videoRewind, and "videoStop". The SWF in this case was named "video."
    Apply this script to each of the 3 sprites.
    property mySprite
    on beginSprite me
      mySprite = sprite(me.spriteNum)
    end
    on mouseUp me
      case mySprite.name of 
        "videoPlay":
          sprite("video").play()
        "videoStop":
          sprite("video").stop()
        "videoRewind":
          sprite("video").stop()
          sprite("video").rewind()
      end case
    end

  • How can I add Vender Batch FIELD for Movement Type 511

    Hi, guys,
    I tired to add a Vender Batch FIELD (LICHA) entry for Movement Type 511 through OMJJ/Field selection(Enjoy), but it's not allowed, is there any approach else to get it done? Thanks.
    Michael

    Hi,
    Try this path as SPRO-Materials Management-Inventory management and physical inventory-settings for enjoy transactions-settings for goods movement(MIGO)--field selection per movement type.
    If you add the field LICHA for movt 511.Make it optional or required entry whatever you want. It will come at the time of MIGO.
    Regards,
    Goraksh.

  • HT204370 how do I add scene bookmarks in downloaded movie? (2 or more)

    I downloaded (and paid) for a movie.  Now while watching it, I would like to bookmark a few scenes to playback for a project.  Can I do this, and if so - how?

    With what other contacts service are you syncing to and from?
    Google or Exchange or something else?

  • Trying to add titles to project

      how do i add titles to the scene/time line so it only effects one photo , it keeps on transfering the titles ie(fun in the sun) onto other photo images in the scen e/time line, i would really appreciate someones help its driving me crazy not to mention hours and hours of trying to work it out my self lol.

    Are you using the slideshow editor in Photoshop Elements? If so you can create a blank slide and add a title. Or select an image, then choose the text tool to add a title on top of an individual photo. If you are using Premiere Elements, you will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

  • How can I add metadata to iWeb pages hosted on .mac?

    How can I add title/description/keyword metadata to my website?
    Is there an easy solution?
    I publish my site to my .mac account.
    Any direction would be appreciated. I work in the web marketing industry, so it bugs me not being able to add metadata to my site.
    Thanks!
    Macbook   Mac OS X (10.4.7)  

    So I find the folder: Welcome_files for example
    Then do I open up the Welcome.js file using text
    editor?
    When I add the metadata, then do I Save As and put
    the file back into the Welcome_files folder?
    Actually every page like Welcome has a Welcome.html file and then a folder "Welcome_files". The file you want to edit is the Welcome.html file. Not anything in the folder.
    Do I need to Publish again, or is that process
    automatic since the site is pulling from down from my
    iDisk?
    Nope don't publish again. That would just overwrite you changes again. Just save the file in the same place and you're done.
    Will I have to re-enter metadata every time that the
    page changes, or every time the site changes?
    Anytime iWeb thinks the page needs to be republished, your edited file will be overwritten.

  • How to add new line in transact move order line

    Hi,
    i am able to update locaotr in Transact move order.
    But i want to add two locators for the same line.
    I tried to insert one more record in data base, but getting error unique index error.
    so how can we add new line in transact move order line .
    please help to slove this isse.
    Thanks In Advance
    Venu.

    Hi,
    the fact that your question is posted in Order Management section, does the move order automatically generated by OM?
    nevertheless, i don't think you should (or allowed, in this case) to add a new line in transact move order. Transact move order only queries (not create records) the move order lines eligible to allocate and transact.
    So, I don't see why you need to add a new line in transact move order.
    You can, however, add a new line in the allocation of the lines, where for instance, you need to have half of the line allocated to one locator, and the other half to another locator
    Thanks

  • Add a clip to a movie in quicktime player

    how do I add a clip to a movie in qicktime player 10.1?

    I have no trouble when I try to do this.
    Make sure you haven't used the "Trim" feature before trying to add another file.

  • I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • HT2523 How do I add shadow to the title of a document while in Pages? For instance: NEW YEAR'S NEEDS. I'm also at a loss to know how to create a folder for certain types of documents such as "Sermons" or "Lessons."

    How do I add shadow to a title, such as, NEW YEAR'S NEEDS, while in Pages? I also don't know how to set a new folder for documents of the same type such as, "Sermons," or "Lessons." Any help will be greatly appreciated.
    Donnie

    Yes, I very well may be over thinking this, but I tried duplicating and moving it, but the text distorts slightly, which can be mostly remedied by rotating it on the x-axis, although the light is still off. And the shadows and reflections are not visible - this is pic1... In pic2, I used "rotate 3d object" with the green and red arrows,  instead of just sliding it up the y-axis using the coordinates in the scene tab. Using the green and red arrows to move the text preserved the reflections but the shadows now aren't visible. It was also hard to align the text perfectly in scenario 2. Thanks for the help

Maybe you are looking for