How do i add to a published site?

i am defeated...
how do i access an iWeb site i have published to add another page? i launched iWeb and the "visit a published site" is grayed out. i can only find my site by clicking on the link in an e-mail i sent announcing it, and then i am only viewing it as anybody else would. i would like to know if i can build upon or edit a published site. and where is the link to .mac on the new apple site?
thanks

thank you for the quick response. i erased and my drive and re-installed almost everything in the hopes of rectifying an ongoing and annoying problem and i don't have the AppSupport>iweb pathway available to me. how do i find a link to log onto .mac when i re-publish this my iWeb site to .mac?

Similar Messages

How do I open a previously published site that is on .Mac to my new iWeb?

I have a site published on .Mac that I did on my old Mac which had the previous version of iWeb. I just bought a new Mac with iWeb '08 and I can't figure out how to get it to synch with my published site.
Anyone figure this out?

I hate to tell you this, but I asked Apple technical support that very question when the iWeb update Killed my domain file. Which, to be absolutely fair, I did NOT have backed up. I could have saved myself a ton of grief if I had backed up before I updated. TONS!
I asked if there was someway to take my perfectly good site from dot mac and put it in iWeb. He indicated that it was not possible, the only route is to use your old site as a "guide" and build it from scratch.
I'd love to be proven wrong on this one!
Best of luck!

How can I add bulks of web sites to a certain existing source?

Hello,
we administrate web sites in a database application and we like now to sznc the list in this application with those inside oses for a certain exsisting source. So we need either to knwo how to bring bigger lists of web sites into oses via the admin web pages or via other methods.
So it would be nice to have a mthod, which can be used in scripts.
Does anybody use something simular or created a solution for this task?
regards Harald

See:
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
*https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

How to programmatically add webpart to publishing page

How to add visual webpart in publishing page please let me know.
Thanks in advance

public void AddTaskListsWebPart()
            SPLimitedWebPartManager manager = null;
            SPFile file = null;
            try
                SPSecurity.RunWithElevatedPrivileges(delegate()
                    using (SPSite spSite = new SPSite(site id))
                        using (SPWeb spWeb = spSite.OpenWeb())
                            spWeb.AllowUnsafeUpdates = true;
                            file = spWeb.GetFile(pageurl);
                            if (file.CheckOutStatus == SPFile.SPCheckOutStatus.None)
                                file.CheckOut();
                                manager = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
                                if (manager.WebParts.Count <= 0)
                                    TaskLists objTaskLists = new TaskLists(); //Replace
TaskLists with your webpart name
                                    manager.AddWebPart(objTaskLists, "zone1",
0); //replace zoneid and index with yours one.
                                    manager.SaveChanges(objTaskLists);
                                    //pnlTaskLists.Controls.Add(objTaskLists);
                                    file.Update();
                                    file.CheckIn(string.Empty);
                                    file.Publish(string.Empty);
                                    spWeb.Update();
                            spWeb.AllowUnsafeUpdates = false;
            catch (Exception ex)
                Utility.SPTraceLogError(ex); //Handle your error as per your logic
            finally
                if (manager != null)
                    manager.Dispose();

How can I edit my iweb published site when the domain file is empty?

How can I edit my iweb site when the domain file opens up empty? I have the site backed up in mobile me, on my computer, and on an external hard drive.
How can I transfer these files into iweb?

Hi there,
To edit your site from one of your backed up versions, place the Domain file in User>Library>Application Support>iWeb & then launch iWeb. Update & publish.
Ben

How do I edit HTML after publishing site?

What does it mean to edit HTML after publishing the site? How exactly is that done? From another thread, it seems that re-publishing will overwrite that HTML - is that true? Thanks for any insight into this.

This link may help:
http://iwebfaq.org/site/iWebAlternativeHTML.html

How do i add music to my site?

What is the most easyest way to add music to my MUSE site?

Hi,
Please refer to the following forum post for a similar discussion : https://forums.adobe.com/thread/991434?q=add%20music
Regards,
Aish

How do I revert my iWeb published site (the actual published site in internet is up to date) the one on my repaired computer is old from a time machine back-up and out of date?

The question is above I repaired my hardrive and the iweb site is from an old time machine back-up. In the web my site is up to date and I want to update my computer stored iWeb site to the site in internet ?

You need to copy and paste the content from the published files back into iWeb and recreate any missing pages since iWeb has no import facility.

How come my comments are visible in iweb but not on published site?

I published my site (after many frustrating attempts and publish errors) and had allowed comments. I made a blog entry and published to .mac and found out from a friend that that particular entry didn't have an option to add a comment. I tried to republish many times - I don't know how it happened but the comment option showed up eventually. I had the same thing happen again today so I tried publishing again but this time I tried publishing to a folder. Not sure if this caused the problem but now one comment on the blog disappeared and the rest are only visible in iweb and not on the published site - on the published site there isn't an opportunity to add comments where they used to be. Can I get the comments back on my site?
Thank you for any help.
MacBook Mac OS X (10.4.10)

Oh, rats. Do I need to remove the folder that I published to? I'm not even sure where to find it. I have republished successfully with the comments still in iweb but they don't show up on-line. I'd really like to get them back on if possible.

How can I get iWeb to visit the proper published site?

I originally set iWeb 2.0 to published to a website for my business (www.globaltradeexpertise.com) and since then, I changed that site's host to another hosting company. I decided to use .mac for my personal website, www.jenniekessinger.com - and have changed .mac to publish to that domain name - which it has just fine. However, now, when I update the site and publish it, iWeb tells me that it is published and to go to www.globaltradeexpertise.com - which is not the right site. The published changes are made to the proper site, www.jenniekessinger.com - so how can I get iWeb to reflect that address after if finishes publishing and when I select "visit published site" from the file menu?
Any help would be appreciated!

Maybe you could let me know which hosting service you are using so that I can add them to my list of those NOT recommended for iWeb users!
I just dealt with one today who claimed the iWeb sites were incompatible and that the first line of code should be deleted from every HTML file before upload to their server.
They didn't even offer the information that it would be a lot easier to modify the .htaccess file never mind offer to do it for a customer.
Nobody should expect to pay for service like this and the answer is to dump them and go to a company that gives you some value and support for your money. If the ones on this page don't meet your requirements for cost and service...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
... search this forum for those recommended by other users. There's a long list of them.
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

How to programmatically add timeline webpart to publishing page

Can we add timeline webpart programmatically?
If yes then please let me know how we can add it?

Hi Jason,
Thanks for your reply. It helped me lot but i want to add something to your code.
1) Added web.AllowUnsafeUpdates to resolve error of disallow to update.
2) Added TimelineType and SourceSelection properties else it shows add setup properties of webpart
3) manager.WebParts.Count >= 0 Added condition else on every request it adds control.
Also i want to know few line of code from your answer:
1) What is the purpose of using storagekey? Why it is needed?
2) Why you update page items?
try
                using (SPSite site = new SPSite(SPContext.Current.Site.ID))
                    using (SPWeb web = site.OpenWeb(SPContext.Current.Web.ID))
                        web.AllowUnsafeUpdates = true;
                        SPFile page = web.GetFile("/Pages/Home.aspx");
                        page.CheckOut();
                        using (SPLimitedWebPartManager manager = page.GetLimitedWebPartManager(PersonalizationScope.Shared))
                            if (manager.WebParts.Count <= 0)
                                SPTimelineWebPart timelineWebPart = new SPTimelineWebPart();
                                timelineWebPart.TimelineType = SPTimelineWebPart.TimelineTypeTaskList;
//Task type list
                                timelineWebPart.SourceSelection = "Tasks"; //list name
                                manager.AddWebPart(timelineWebPart, "timelineZone", 0);
                        page.CheckIn(string.Empty);
                        page.Publish(string.Empty);
                        web.AllowUnsafeUpdates = false;
            catch (Exception ex)
                lblError.Visible = true;
                lblError.Text = ex.Message.ToString();
Once again thanks for your reply. Please if you can resolve my queries then please reply it.

How to recreate an already published site from a saved copy....

I recently lost a drive and was only able to salvage my documents folder in which I had saved a copy of an already published iWeb site. How do I relink these files? The site is fully funktional and I have all the files on the same computer...I've reinstalled the app..Now what???
PowerBook 17' Mac OS X (10.4.5)

The file that you need is in your domain.sites file, it lives here:
User / Library / Application Support / iWeb / Domain.sites
If you dont have this file, then you cannot do anything other than start again, maybe copy paset from the published site.
All you need to do is put your old domain.sites file in the location above and open iWeb.
You may need to create the /iWeb folder, to do this open iWeb, add a page, any page and then Quit iWeb. This creates a domain file in the /iWeb folder and tells iWeb where to look for it. Delete this new domain file and replace it with your old one.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.5) Getting Started with iWeb - Tips here

Publish site with muse to temp site but then Business Catalyst replaces site with Coming Soon. How d

Hello. I will try to repeat my steps to find the issue:
I create a new site from scratch on business catalyst so I can choose the package with the blog and ecommerce.
I then create the site in Muse and publish it to the domain I created when I created the new site in Business Catalyst.
I add some modules to my Muse design and publish.
Everything works for a while but then later the Muse published site is replaced with Business Catalyst's default "Coming Soon" graphic.
How do I stop this from happening?
Thank you!

Ok, I figured out what is happening, though I still don't know how to correct it.
If the temp domain is put in without the index - http://bloomingarden.businesscatalyst.com - I get the coming soon graphic.
If I add the index.html - http://bloomingarden.businesscatalyst.com/index.html the site shows up.
How do I get the site to show up when just the domain is put in without the index.html?

Publishing site - Add a list to Site pages - Ribbon items disabled

Hi,
I created a publishing site in SharePoint 2013.
I created a custom list and added few data to it.
In the Home page of the site, I clicked on "Add Page". Once the page is created, I clicked on "Insert" - select "webpart" - choose the custom list. I published the page.
The list was added. However on selecting any of the item in the list, the items inside the ribbon having "Items" and "List" seems to be disabled.
I have not changed any master page. I have owner permission in the site.
How to make the ribbon items visible when an item is selected? This is only happening for a publishing site template and not on a Team site?
Has anybody encountered this? How to fix this?
Thanks

To my Knowledge there doesn't exist ribbon with "Item" and "List" categories in publishing page of publishing site template
I believe you have not checkedin the page and
Published the page. Kindly publish the page and check if you are still able to find the ribbon with those categories disabled. I just tried and dint find it.Let me know if still the problem exists.

How to get (welcome) search page layout on publishing site

hi friends
i am working with publishing site
i need to use (welcome page) search page layout but it is missing in
how to get it

What is that error page there?
Did you make any changes to default page. If yes try to revert it
http://stackoverflow.com/questions/631113/page-layout-does-not-appear-in-the-page-layouts-list
Did you have a look at the "Page layouts and site templates" page under Site Settings? On this page you can enable an option that limits the available page layouts to a specified list of page layouts.
I have worked on a project where we needed to limit the page layouts available on a custom site definition. We implemented this in a feature, that enabled the "limited page layouts" option and populated the list of available page layouts upon activation.
If this is the issue you are having you could simply turn off this option in the web interface or add the new page layouts manually, but you could also consider implementing a feature receiver that automatically adds your custom page layouts to the list
of available layouts.
http://www.myspblog.com/2011/04/page-layouts-missing-sharepoint.html
If this helped you resolve your issue, please mark it Answered

How do i add to a published site?

Similar Messages

Maybe you are looking for