How do I adjust incoming sound for Skype and magic jack

How do I adjust incoming sound for Skype and magic jack. Out going sound is great.

Hi, domiboy.
Thank you for visiting Apple Support Communities.
Here is some information that you may find helpful.
Adjust audio
Cheers,
Jason H.

Similar Messages

Skype and magic jack on same modem connection

I have been using Skype for years on my laptap computer and have had few problems. I recently purchased a Magic Jack and have plugged it into the modem that serves my computer. Skype continues to work fine on my computer, but when someone calls my Magic Jack number they get a message saying "the person you are trying to call is unavailable." The phone doesn't ring on my end. I'm wondering if Magic Jack thinks the line is busy when my computer is online. I have Skype set so it is connected whenever I am online. Both systems are plugged into the same landline.
Any suggestions? Ideas?
Thanks

You could run Virtual PC for Mac 7, but by the time you bought the software and a copy of Windows to run on it, you'd be better off buying or building a basic computer to run Windows on, or use the money toward buying an Intel Mac. Doing the latter would mean you could just use the Magic Jack natively, no Windows need be involved.

How can I adjust picture settings for Netflix and other apps?

i nwed to set up 65h84 channels w/o remote also need to unlock vchip and codelock w/o remote

I don't believe you can perform all functions without a remote. If you don't have the remote, you may want to acquire a new remote.
- Peter

How can i adjust the sound level customized for each browser tab?

Hi,
I'm kinda a new mac user. I want to know how i can adjust the sound level specifically for each browser tab or application the way you could do in windows.
Thanks.

Volume Mixer feature that Windows has, is not available in OS X.
Best.

How do I adjust display resolution for Mac Mini?

How do I adjust display resolution for Mac Mini? Text does not look crisp. Using Samsung 27 inch monitor with HDMI input

Apple menu -> System Preferences -> Displays. Depending on your version of Mac OS X, it may be set for "Best for Display" in which case it should already be set at the optimum for your monitor, or it may display resolution options in which case you should set it for the native resolution of your display.
Regards.

How do I retrieve incoming calls for the past one month?

How do I retrieve incoming calls for the past one month?

You can open the phone app and tap on recents at the bottom of the screen that's about it

How do I change notification sound for Scanner Radio Deluxe?

How do I change notification sound for Scanner Radio Deluxe?

Hi,
Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
Make sure the iPad speakers are selected, not your wireless.
Carolyn

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

HT4436 how can i setup one account for me and my kids ?

how can i setup one account for me and my kids ?

One account each, or one account for all of you to share?
Either way, follow the instructions here: http://www.apple.com/icloud/setup/
Remember, if you share an iCloud account, you won't be able to maintain independent Contact lists, calendars, bookmarks etc. They will all be synced to all devices setup using the same account.

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

HT5243 how do I find my password for adobe and Java

how do I find my password for adobe and Java

"Java" doesn't have a password, unless you mean your admin password for installing software. That's whatever password you (or the person who set your computer up) used to set up your admin account. That's the same password that you use when you start up the computer if you get asked for one. You cannot retrieve this password if you've forgotten it, but you can reset it and make a new one. See this support article if that's the case:
http://support.apple.com/kb/PH14325
"Adobe" is a company and likewise doesn't have a password. However, if you have Adobe cloud-based software you may well have set up a password with them. Adobe also require an account and password for downloading certain products. You'll need to contact Adobe to retrieve any such password if you've lost it.
Try
Adobe ID, sign-in, and account help

How do I change my number for iMessage and facetime

How do I change my number for iMessage and FaceTime on my iPad mini

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

How can i get best practice for SD and MM

Please, can any body tell me how can i get best practices for SD and MM for functional approach?
Thanks
Utpal

Hello Utpal,
I am really surprised, in just 10 minutes you searched that site and found it not useful. <b>Check out my previous reply "you will not find screen shot in this but you can add it in this"</b>
You will not find readymade document, you need to add this as per your requirement.
btw, the following link gives you some more link for new SAP guys, this will be helpful. <b>Check out HOW to BASIC transaction</b>
New to Materials Management / Warehouse Management?
Hope this helps.
Regards
Arif Mansuri

How to find R/3 table for FI and PS Datasources

Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
Shanthi

Hi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK

How do I adjust incoming sound for Skype and magic jack

Similar Messages

Maybe you are looking for