How do i adjust iTunes playback speed on my mac ?

How do i adjust iTunes playback speed on my mac (OSX 10.10.2) ?
I'd like to play podcasts at 1.5x, without running them through a separate script.

I have not see mention of any way in iTunes itself.
Changing playback speed in iTunes - https://discussions.apple.com/message/11432266 - primarily for audiobooks but if you read the whole thread there is mention of ways to do this with other media.
You can also look into stand-alone applications such as AmazingSlowDowner.

Similar Messages

How do I share iTunes with multiple users on Mac mini?

How do I share iTunes with multiple users on Mac mini?

You have to turn on Sharing and then Authenticate Sharing on the other devices. You can have up to 5.

How can I read the internet speed in a MAC?

How can I find the INTERNET SPEED in a MAC?

You typically use a free Internet Speed test. It does an upload and a download from a known site, bypassing certain configuration problems. Just do a search to find a dozen services eager to test with you (in exchange for the Ads on their pages).
Do not pay for this service, and DO NOT accept any CR@P they suggest you download to "fix" your speed. They cannot tell from outside whether you have problems, and none of the things you can download ever makes anything better.
If using Wi-Fi, one generally finds that the Wi-Fi part of the connection is the limiting factor.

HT4946 How do I transfer Itunes library from pc to mac?

How do I transfer Itunes from windows 7 to mac,then to iphone 5? Many thanks,Judith

Click here, pick the option which best fits your situation, and then sync the iPhone with that library.
(89633)

How do I transfer iTunes music from Windows to Mac?

How do I transfer iTunes music from windows to Mac?

Click here and pick the option which best fits your situation.
(124310)

HT3176 How can the slow motion playback speed be adjusted on Apple TV (pause and clicking right/left)?

I am looking to adjust the paused slow motion playback speed of Apple TV. On one of my Apple Tv's when paused I can click right or left to view tv in frame advance (or one second advance) on a different Apple TV there does not appear to be any advance even after multiple clicks. But, it will jump 10 seconds when paused and left or right is held down as it should.
Third gen. (A1427) Apple TV Software version on both 7.0.3

Unfortunately with that speed you are not going to have a good experience with HD streaming. I would make sure everything is set to stream SD. Go into the settings - iTunes Store and you can switch there for any purchases/rentals made through them.
If you use Netflix (or other streaming sites) go into your account(s) and see if you can switch to a lower quality stream. I know Netflix has that in place.

How can I adjust the clip speed in the editing window of Premiere Elements 11?

In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!

SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR

How do I adjust double click speed in Mountain Lion. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

Double clicking is no longer opening my folders.
How can I adjust the double click speed in Mountain Lion to reduce the double clicking speed. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

For 10.8.3, it's in System Preferences > Accessiblity > highlight Mouse & trackpad on the left. The Double click speed slider shows on the right. Moving it to the left gives you more time between clicks. Moving it right gives you less time.

How to see the file transfer speed on a mac

Hi, I'm kind of a beginner with a Mac, I have worked on windows for all this years and now I have a small dilema. Can someone please tell me how you can see the file transferring speed on a mac. When you copy and paste from one drive to another, or from time capsule to my mac, etc a dialog appears showing you a progress bar and the time remaining. I would also like to see the speed of the transfer. Is it posible to see this variable?

In windows - vista when you copy or paste a folder from one location to another in the file transfer pop-up you can see the speed of the transfer.(You must press the more details arrow on that pop-up). Does Leopard has any configuration for this kind of information.
I will try iGet and write here my feedback.

My 2006 iMac has begun to run hot which often causes issues. How can I adjust the fan speed with supported software?

24-inch iMac (2006) funning hot. Used "power button while turning on" trick to cool it so we could load some software which was telling us it was too hot; it was also smellong like it was going to burn up on fire one day while running a slide show for an hour. Need to figure out how to un-do the constant-on fan and need to find "supported" software that allows me to vary speed.

There is one called smcFanControl 2.2.2 released, but you really need to make sure that your iMac's air intake vents are clean and free from dust so that it is not sucked deeper into the iMac.
To clean the iMac's intake vent:
1. Shutdown the iMac and disconnect everything from it including the power cord.
2. Lay the iMac face down on a soft towel or cloth and go get out the vacumm cleaner.
3. Usinge the vacumm's brush or cravass tool, vigrously vacumm the bottom grill and small vent under the stand.
4. You also might want to remove the center RAM cover on the bottom and carefully vacumm it out without distrubing the RAM modules.
Then next before using smcFanControl, use the iStat Pro, a Dashboard Widget by iSlayer to first check all the sensor temp's and the speed of all three fans.
Finally if it is still having a cooling problem or you find that a fans has failed, you should stop using the iMac until the problem is fixed by an Authorized Apple Service Provider.

How can I slow the playback speed of a song.

I purchased a book on CD and downloaded it to my iTunes Library which downloaded it to my iPod. I find that the narrator is reading too fast for my liking. How might I slow that down when listening? Or do I need to change something before downloading it? I see how to slow down an "audiobook" but my book on CD downloaded to music and I can't seem to get it to the Audiobook folder. That would be my other question- how can I download an audio book that I purchased into the audiobook folder on my iPod.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

My video clip plays too slowly. How do I set the playback speed?

I am just learning how to use Premier Pro. When I import the video clip and put it into the sequence section, the clip plays extremely slowly - more like still photography.
What am I doing or not doing to cause this?

More information needed for someone to help... please click below and provide the requested information
-Information FAQ http://forums.adobe.com/message/4200840
Also, For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341
>just learning
The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

How do I adjust the PDF settings on my mac?

I am having major problems learning to use my mac.
I have docs that I have edited in Word for Mac.
In windows, I used to be able to easily press Print, PDF, then choose the level of PDF I wanted.
Now. I hit print, PDF, then Save PDF As, etc.
Result:
1. Tells me "The borders of Section 1 are outside the printable boundaries. Do you want to continue"
I have gone back and done everything I can think of, but it still will not include a slither of the bottom portion of each page of the completed PDF. Seriously ***? Why not at least prompt me on how to fix this.
2. The resulting PDF is 14.5 MG. The original Word doc was weighing in at 2.5. Why is it making my doc bigger?? Despite continual searching, I can not find how I adjust the PDF settings to make it a light, emailable PDF. If I choose Send PDF as email, the result is the same. A big 14 MG file. This is driving me insane.
I can not now use my mac to do the most simple, yet urgently necessary task I must often do, which is create a doc, pdf it and email it.

I am having major problems learning to use my mac.
I have docs that I have edited in Word for Mac.
In windows, I used to be able to easily press Print, PDF, then choose the level of PDF I wanted.
Now. I hit print, PDF, then Save PDF As, etc.
Result:
1. Tells me "The borders of Section 1 are outside the printable boundaries. Do you want to continue"
I have gone back and done everything I can think of, but it still will not include a slither of the bottom portion of each page of the completed PDF. Seriously ***? Why not at least prompt me on how to fix this.
2. The resulting PDF is 14.5 MG. The original Word doc was weighing in at 2.5. Why is it making my doc bigger?? Despite continual searching, I can not find how I adjust the PDF settings to make it a light, emailable PDF. If I choose Send PDF as email, the result is the same. A big 14 MG file. This is driving me insane.
I can not now use my mac to do the most simple, yet urgently necessary task I must often do, which is create a doc, pdf it and email it.

How to import an iTunes library from an 2010 Mac Book Pro to a brand new iMac

I had a Mc Book Pro 2010 dedicated exclusively to my iTunes Library. I just bought a 21.5" iMac where I would like to have everything including my 9,200 song collection. The former has Maverics and the latter has Yosemite. iTunes 12 on both. What's the best way to transfer my library to the new machine?
MAny thanks.

Copy the /Home/Music/iTunes/ folder in its entirety and the /Home/Library/Preferences/com.apple.iTunes.plist file to an external drive. Connect the drive to the new computer and transfer the iTunes folder to the /Home/Music/ folder and the .plist file to the /Home/Library/Preferences/ folder. Open iTunes on the new computer. It should find your data.
Exposing the /Home/Library/ Folder
1. Click on the Desktop, press the OPTION (⌥) button, select Library from the Finder's Go menu.
2. Select Go To Folder from the Finder's Go menu. Paste the following in the path field:
~/Library
Click on the Go button.

How can I download iTunes 9.1 for my Mac using a PC?

When ever I go to the download link it automatically detects that I am using a PC (in fact it's Ubuntu linux, yet it only offers me the Windows version of iTunes), is there a direct download link to the Mac OS X 10.6 iTunes 9.1 dmg (for installing on an i5 iMac)?
I also want to download iTunes for 10.4.11 on a CoreDuo iMac, is the same installer good for both versions of Mac OS X?

Had the same problem. Also worked fine on my MacBook, but not on my new iMac. Here's what I did to fix it:
Archive and Reinstall Mac OS (takes about 40 minutes). This reverted my system back to 10.6.2. Just pop in your Mac OS disc that came with your computer. Mine had 10.6.2 on it, and "Archive and Install" is the default option. When it's done, run software update and update everything. Now it all works fine.
Somewhere along the way, some file got corrupted somehow. But doing an "archive and install" of your OS undoes whatever file damage was incurred, and allows everything to update normally via Software Update as it should.

How do i adjust iTunes playback speed on my mac ?

Similar Messages

Maybe you are looking for