How do I adjust the amount of time before time outs?

Time outs happen too quickly. I want to extent the amount of time that elapses before it times out while loading a site.

Hello Scootdog61,
Thank you for using Apple Support Communities!
The setting you are looking for is shown in this article:
iOS: Understanding passcodes
http://support.apple.com/kb/HT4113
Just above Simple Passcode, the setting that says Require Passcode.
Regards,
Sterling

Similar Messages

  • How do you adjust the number of rings before the incoming call goes into voicemail?

    How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

    Set by your carrier, so contact them.

  • How do I extend the amount of rings before it goes to message bank?

    I have read you press the phone symbol and type #61#  and press call on the keypad. Then on the text that appears on your screen on the forth line after the numbers you put the amount of seconds you want your phone to ring for. I don't have a forth line with numbers, what do I do please? My phone only rings four times.

    I just looked up Telstra technical support and they say to type **62*(then number of seconds :15, 20, 25, or 30)#
    I tested my phone and it worked.
    Thanks again.

  • How do i change the amount of days before emails get deleted on the ipad

    When i receive emails, they delete after a day. Are there any settings that i can configure in order for the emails to stay longer?

    o nevermind, jorge was right, in the drivers window u can change this, i found it when : go to preferences, go to audio, look at the lil tabs under the bigger icons, right under the audio icon u see drivers, click it and u see the max number of tracks thingy, thanks alot dude

  • How to limit the amount of disk space Time Machine will use?

    On Yosemite, how do you limit the amount of disk space Time Machine will use?
    I'm using a Seagate Goflex Home 2tb drive connected to my router as a Time Machine backup drive.  I use this for three things 1)Time Machine 2) an occasional backup of  windows document subdirectory  3) backup of music and photos for long term storage.   Doing something like re-partioning the drive is not an option.  I'll just go buy another drive for time machine's sole use. In addition, using software from Seagate is not an option.  I don't want to use their software for different reasons (mainly the GoFlex home is really designed as a "media server"  which I don't use.  I, of course, use iTunes. ) On the Mac, I'm only using about 250GB total but time machine is rapidly using up space.
    Apparently using a terminal command like below, used to work,  but no longer works under Yosemite.
    For a limit of 100gb the number below would be 100 x 1024
    sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize 102400
    To remove the limit, use the following command:
    sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
    Now, I'm not too familiar with terminal and I'm not about ready to issue a command without knowing exactly what it is going to do.
    Is there an easier "switch" someplace or an app that does this?
    If I don't limit the size, at some point there will not be any space left for windows backups and additional photo and music files.

    Hmm- added "sudo" and there was no error reported:
    sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize xxxxxx
    I guess we'll see.

  • HT3919 In the past was able to adjust the memory for each individual application, my Illustrator CS5 appears is doesn't have enough memory to complete a particular project. How do I boost the amount of memory that Illustrator uses so I can complete my pro

    In the past I have always been able to adjust the memory of each individual application,
    my Adobe Illustrator CS5 appears that is doesn't have enough memory to complete a particular project.
    How do I boost the amount of memory that Illustrator uses so I can complete my project?

    With OS X, it automatically allocates RAM and it can't be allocated manually.
    What model Mac do you have and what OS X version is it running. Your profile shows a PowerMac and OS 10.6.8. A PowerMac can't run OS 10.6.8. It's max OS is 10.5.x
    How much RAM is installed in your Mac? You need to max out the RAM and close other open apps if you are having problems with Illustrator.
     Cheers, Tom

  • How do you set the amount of time the screen stays lite after your last use?

    How do you set the amount of time the screen stays lite after your last use?

    Settings>General>Auto-Lock.

  • Since installing Snow Leopard on my iMac, my incoming mail on Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Since installing Snow Leopard on my iMac, Entourage is showing sending time nine hours too early on incoming messages. How do I adjust the time in Entourage? Thanks

    Sylvia,
    There is a Office for Mac Product Forums, if now one here is able to answer I'd recommend posting on that forum.

  • How can I get the amount of free space that is on my drive to show at the bottom of the drive in Lion.

    How can I get the amount of free space that is on my drive to show at the bottom of the drive in Lion.
    This is a must feature for me and I may have to go back to Snow Leopard.
    Please help!

    Right click on your desktop and choose "viewer options". Adjust the spacing and the size of your icons and you should be able to see the size of your drive(s) and the free space available on each drive with the exception of your bootcamp drive which will only show the overall size of the drive you have it on.  This may be different if you only have one system drive (like on a Mac Book Pro) with a partition containing bootcamp on it. this may only show you the overall capacity, I can't say for sure though as I only use a Mac Pro with 4 seperate Hard Drives which are showing both overall capacity and free space available. Hope this helps
    Denisimo

  • How do you adjust the duration of audio loop?

    How do you adjust the duration of the audio loop that you can setup to play in the main menu?

    Your best bet is to bring your audio into DVDSP at the length you need it. You can adjust the menu loop time in the inspector but this also adjusted your video as well. DVDSP is not an editor - only an authoring tool All adjustments need to be made outside the tool.

  • How can I adjust the length of a note? Please help.

    How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

    Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

  • How do you adjust the brightness on a Thunderbolt Display

    How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

    I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare  - thanks Andrew - got me there. It seems daft!
    The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
    At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
    So:-
    Apple menu >
    System Preferences>
    Displays>
    Click Arrangement [at the top]
    Click Mirror Displays [at the lower left]
    That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
    Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
    Hope this works for others.

  • Web page comes up in small print. I understand "cntl ++" but how due I adjust the size to make it larger when it 1st displays?

    I open a web page and it is displayed in small print down the middle of the screen. How does one adjust the text size so it is larger print when it 1st comes up so I do not have to keep hitting "CNTL++" all the time?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use one of these extensions to set a default font size and page zoom on web pages:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • How do I adjust the touch screen sensitivity?

    How do I adjust the sensitivity of the touch screen?

    You can't adjust the screen sensitivity.
    Try and Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • How do I adjust the HTTP server receive timeout for one site on Ironport S670

    Hi All,
    How do I adjust the HTTP server receive timeout for one site on Ironport S670?A web based application can take a long time (45 to 60 minutes) to fill a form once a user Login.The proxy will timeout the connection before the result comes back.How do I resolve the issue?
    Thanks

    Sandeep,
    There is no option to adjust timers for one specific website.  Any changes will affect all websites.  The setting is under Security Services > Web Proxy.  If only one site is being problematic for you, I'd recommend you consider bypassing it.
    Is this an HTTPS site?
    You may want to open a TAC case and have them take a deeper look into this.
    -Vance

Maybe you are looking for