How do I adjust the black borders around my phones screens ?

How do I adjust the black borders around my phones screen

What "black borders"?
If I understand you correctly, you don't.

Similar Messages

How can I remove the black borders after draggin in a M2TS file?

I record gaming videos with my HD PVR and the output of the file is M2TS. Everytime I drag it in Premiere, it will show small black borders at the top and to the right of the video. I knew how to do this in Vegas but am clueless on how to do it in Premiere.
The M2TS file is 1280x720

See if this helps...
Please NOTE that the PPro CS6 screen may look a bit different
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

How do I adjust the brightness/light around the EDGES ONLY?

Hey everyone I just bought a JAG35PRO DOF adaptor for my Canon Vixia HF M30. After using the adaptor the image I think lets less light in or something, and the edges are all darker. Is there anyway to fix this in Adobe Premiere? Thanks.

You are getting a vignette from your adapter.
You may be too far stopped down (aperture) or not far enough zoomed in on the adapter screen.
It will be very tricky to fix on your existing shots because you need a reverse vignette or a mask. Whatever..they need to blend.
There are a number of ways of creating a Gradient mask
This could be done in Photoshop as well but:
In PPRO...Try creating a Title with a circular / eliptical "gradient" that generally covers the area of the vignette.
Place Title above the clip in the timeline. Opacity >Blend> maybe Screen (adjust opacity as well for control) Try the Blend Modes because lighten may work as well.
Its going to be a bit trial and error.

How can I change the black background around my photos in iMovie?

I hope you geniuses can help me with this. I am making a slide show in iMovie, but any portrait style photo has a wide black background. I've spent far too many hours trying to fix it (calling Apple Support etc.) but I'm still stumped.
One thought-- if I could convert my jpgs to a video file I could layer them because I movie allows you to layer video files over backgrounds.
Any ideas for me? Much appreciated. Michelle

Why not use one of the many graphic editing programs that are available (some are free) to create a new image with the desired background and aspect ratio with your portrait image in the middle?
Dan
P.S. Actually the best results would be to use Aperture but that's another 80 bucks.

How to fix black borders around transparent PNG files?

Hello,
Recently, iMovie has started putting black borders around transparent PNGs. How can I fix this?
http://img19.imageshack.us/img19/4668/picture9bt.png

gndagnor wrote:
Any way to fix the alpha transparency when importing PNG files to iMovie 09?
I just know the two options - wrong (8bit) png or that plugin, which in an older version destroyed transparency..
what also make transparent-to-black is, when you 'manipulate' the imported png, esp. adding a *KenBurns Effect* - that kills transparency instantly.
for test purposes:
• create a new project
• create a new png with some traansparency
• add new png to new project - same result?
and just to avoid EVERY problem: your sys preferences/Monitor is set to 'million colors'?

How to get rid of the black border around the artboard

Hopefully my last question for tonight.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border? Thanks
***Update***
I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

Doesn't change the fact my spider looks like a tick:)
Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

How do you adjust the font size for the tabs and icons around the screen?

How do you adjust the font size of tabs and and icons to ake them larger?

sfcalling
Click on the text in the menu so that you see the bounding box around it. Look to the right of the Movie Menu customization workspace, Adjustments Palette, Text and edit your text font style and size.
In this screenshot, "Glass Flowers" text in the main menu is selected and its Adjustments Palette Text editing opportunities are shown. To do comparable editing in the scene menu, click on the scene menu in the bin to bring its image up to the screen.
Please let us know if you are OK with the details.
Please also review the following Adobe document on disc menus which applies to both version 11 and 12.
Adobe Premiere Elements 11 * Creating disc menus
By the way, what computer operating system is your Premiere Elements 12 running on?
Thanks.
ATR

GT60 3K IPS black borders around the screen on lower resolutions

I've got an MSI GT60 with 3K IPS display and GF880M and although it's a very powerful machine it sometimes isn't fast enough to play the games with the native resolution on high details, therefore in several games I wanted to lower the resolution to get a better experience. However this is where I have a problem, because if I change the resolution in-game what usually happens (80% of the games I've tried) is the screen is getting smaller and I have back borders around it. This is kind of frustrating and I wanted to ask if you know any way of sorting out this issue. I'd like to be able to play a game at 1080P for example but have it stretched to the whole screen.
Some of the games I've observed this behaviour:
1. L.A. Noire
2. Assassin's Creed: Black Flag
3. Far Cry 3
4. Max Payne 3
I've tried lowering the Windows resolution prior to opening the game but it makes no difference. I've also looked at the nVidia Control Panel because some of the versions of the drivers had the option to stretch lower resolution to full screen but in the latest one I couldn't find it.
As the result of this I'm feeling a little frustrated that although the notebook itself is one of the most powerful ones available on the market I cannot play it the way I wanted and I begin to think paying extra for the 3K display was a mistake a I should've gone with the 1080P version. But I hope there's a fix for this issue.

I've found a workaround but it's very annoying as I have to apply it everytime I launch a game (or if I accidently alt-tab back to windows desktop).
1. Run the game and let it launch with the back borders
2. Ctrl+Alt+Del and go to desktop (don't Alt-Tab, it won't work)
3. Open Intel Graphics properties, change the resolution to 3k, apply changes, than change it back to 1080P or whichever you like and mark the Desktop Stretching option. Apply changes.
4. Back to the game and the black borders should now be gone.
It's a workaround, not a solution. I'd really like that MSI, nVidia or whoever is responsible for this behavior find a permament fix.

IMac 27-inch with - Black borders around smaller resolutions

Hey,
Back with Boot Camp 3.0, I've had problems with the color depth. It said 32-bit while it appeared to be 16-bit. Now it's been fixed with Boot Camp 3.1.
However, I have an even more annoying problem now. I can't use the native resolution of my display because things are way too small on it. So I'm using the classic 1080p (1920 x 1080 @ 60 Hz) resolution. Problem is, my computer is STILL in 2560 x 1440, and I see Windows 7 occupying 1920 x 1080 pixels, centered vertically and horizontally in the middle of my screen. Around it, there's huge black borders.................
I have a Radeon 4850 by the way. I read somewhere that it had to do with having two monitors, but never installed another monitor on this computer.
I've tried installing and reinstalling and uninstalling a bunch of official and non-official drivers from ATI. I guess I still haven't found the good one... or I haven't found the good option in Windows that fixes this.
Any idea? I know I'm not the only one with this problem, but I haven't found much information on the web about that.

Hi,
using the ATI Catalyst Control Center (usually part of the downloadable Catalyst Driver Suite) should provide an option in the Display properties to use lower than native resolutions 'stretched' (without the black borders).
http://game.amd.com/us-en/drivers_catalyst.aspx
Before installing drivers, it is always recomended to make a System restore Point and/or have a backup to revert back easily in case of troubles.
Also you should remove all remnants of older or other drivers using either the Windows "Software" option, a provided uninstaller or DriverSweeper.
Regards
Stefan

Thin black borders around image (keyline)

Hi,
Does anybody know how to put a thin black border around an image in elements 4?
Thanks

[email protected] wrote: > Hi, > Does anybody know how to put a thin black border around an image in elements 4? > > Thanks > I know a few ways to do this. (A) 1. Ctrl A to select the image 2.<Edit><Stroke (Outline) Selection.. 3. On the resulting Dialog set out the width, colour and location (Inside) 4. Click OK (B) 1. <Image><Resize><Canvas Size..> 2. Check the Relative CheckBox 3. Choose you Canvas Extension Colour (bottom of dialog) 4. Set the Anchor point to the Centre 5. Change Units to pixels 6. Set your pixel width 7. Click OK (C) 1. Ctrl A Selects all of image 2. <Select><Modify><Border..> 3. Choose a border width click ok 4. Leave Selection Active 5. <Layer><New Fill Layer><Solid Colour> then OK (or whichever way you are used to doing this) 6. Modify the Fill Layer for any colour Border you choose. Maurice

Can I rotate a video without having the black borders?

Hi, I shot some movie on my camcorder. I had the camcorder at a right angle at the time. When I rotate it on imovie11 I am left with black borders either side. How can I remove these? I'd really appreciate some help asap with this as I am editing the project right now.... Thanks in advance!
Dave

Hi
Please - no offence - no irony in this at all - just bit of lack of phantasy (in my department). BUT
If You don't like it scaled up to fill sideways and You don't want black borders.
Is it stretched sideways You want . Short fat people and all scaled just sideways - or.
What do You want and wherefrom would that information be retrieved that should fill the black borders ?
What's not recorded can't be created magically as far as I know.
So I guess that You need to explain much more how You think it should look and with what material it would be created.
Yours trying to get a picture of this - Bengt W

How,can,I,adjust,the,camera,settings,on,my,2009,Mac,to,16:9,format?

I want to use the camera on my 2009 iMac to shoot some footage for a video project. The project is in 16:9 wide screen. How can I adjust the camera to shoot in this format?

Thanks for letting us know your questions was answered! A few other thoughts....
RobertofLadywellVillage wrote: ...the video from the i-sight camera is still in 4:3 format so I suppose that it simply can't produce video in 16:9...
True, the viewed camera image is always 4:3 with your old iMovie 6 HD, but experiment a bit.
Some of the iMovie 6 video formats you can select when you create your iSight clips in the separate iSight project can create a 16:9 frame. That frame will contain your 4:3 iSight image but be filled out to 16:9 with symmetrical black bars on the left and right sides of the image. These clips will be importable into your widescreen project. Although the portions recorded on your iSight will contain the black bars that keep the 16:9 aspect ratio you need, you should be able to include both the iSight captured video and your other video clips in the same 16:9 final product.
If you have a 16:9 digital cameras that can record the clips, use that to get the format you need and better image quality than iSight can provide.
However, if you really need to record 16:9 iSight video, and if your Mac has QuickTime Player (version 10.x), try using QTX. After you open a "New Movie Recording" window, QTX can change camera recording aspect ratios by using its Preference controls as shown in this image of the :
If you really need to use an iSight to capture widescreen video that is not block-filled, another option would be to use a later iMovie version that can record widescreen views of your inbuilt camera. I use iMovie '11 to do this, but, if you don't already have later versions, be sure to check System Requirements for later iMovies before you buy to see if they can work with your Mac OS version.
RobertofLadywellVillage wrote: ... Sorry for the commas folks. I had some difficulty posting this question ...
I had no problem understanding your post, and I actually enjoyed the non-standard title. I hope you don't mind my strange attempt at humor, but it is apparent that you were as able to understand my reply as I was your question.
Thanks for the excuse for my silly chuckle,
EZ Jim

Nasty black borders around clicked items

I am suddenly getting nasty black borders around file names I click on (and not just in the finder). Although ugly I would be able to live with if it wasn't for the fact that they can remain on the screen. It looks like corruption. Does anyone have a remedy?

VoiceOver is on, you probably accidentally hit that magic keystoke that turns it on (command-F5, I think.) Hit the keystroke again, or go to System Preferences -> Universal Access to turn it off.
Message was edited by: Király

How can I adjust the skin color of only one person in the photo (Elements 11)

How can I adjust the skin color of only one person in the photo (Elements 11)?
Thanks for your help.

From your question, I assume you know how to do it for all persons :
Menu : Enhance/Adjust color/adjust color for skin tones
So what you have to do is to do the color correction on a layer copy. Concentrate on the person to enhance and ignore the rest of the picture.
When you are satisfied, add a mask to the layer copy and fill it with black.
Set your foreground color to white
In the layer palette, click on the mask icon on the right of the layer icon.
Then use a brush to paint white on the skin of the person to reveal the correction.

Adjusting the black in the Title screen

I am new to iMovie, so thanks for your help, what I can't seem to figure out is, when I place a title in my film, how to not have the black show up with it, so that just the title shows up over the scene I want. Is there something I'm missing? Thanks!!

Do also know how to turn down the background music so you can hear what people are saying?
Audio can be adjusted directly or indirectly. That is you can use the audio tool to either adjust the audio of the "selected file" or the audio of "all other" current audio present. The specific work flow will depend on the specific needs. Be advised, however, that audio can not be adjust continuously as it could in previous version of iMovie use the "rubber band" approach. You can, however, "split" your main A/V clips into sub-segments and make individual adjustments to both volume and in/out fades as needed for each segment since they will still play in the project as if they were one continuous clip.

How do I adjust the black borders around my phones screens ?

Similar Messages

Maybe you are looking for