How do I adjust the speed of an audio clip only in Preimer Pro CC?

Need to adjust the speed of a short audio clip so that it begins at zero, and slowly comes up to normal speed. Anyone know how I can do this?

I don't think you can.

Similar Messages

  • How can I increase the speed of importing audio cds into my iTunes library?  On my old Dell PC cds imported at 30-35x, but my new iMac (using the Apple Superdrive) is trudging along at 8-10x.  Any suggestions?

    How can I increase the speed of importing audio cds into my iTunes library?  On my old Dell PC cds imported at 30-35x, but my new iMac (using the Apple Superdrive) is trudging along at 8-10x.  Any suggestions?

    Hi,
    Not sure you can do anything about this. I get vaiable import speeds - a lot depends on the actual disc. The Read Write spec is 24X but I rarely see speeds close to this.
    Jim

  • Can I adjust the speed of my video clips?

    I would like to use slow motion and fast motion in the movie I'm making with iMovie '08, but I cannot figure out how. I am positive I was able to adjust the speed of clips in iMovie '06, but I just can't find where/how to do it in iMovie '08. Have I lost my mind or has this option been eliminated in iMovie '08?
    And as a bonus question, if it has been eliminated, WHY?

    I was able to adjust the speed of clips in iMovie '06, but I just can't find where/how to do it in iMovie '08. Have I lost my mind or has this option been eliminated in iMovie '08?
    You can within iMovie HD. You can't from within '08. (You can pre-edit a clip for fast or slow motion externally.)
    And as a bonus question, if it has been eliminated, WHY?
    It is not so much a question of why it might have been deliberately eliminated but a question of how to add it to iMovie '08. As has been said hundreds, if not thousands, of times already, this is an entirely new application editing in an completely new manner. Motion changes require re-rendering of the file to use it in a project. iMovie '08 does not do any rendering until the project (i.e., which is merely a set of instructions) is actually completed. In case you haven't noticed, none of the third-party special effect "plug-ins" are compatible with iMovie '08 either. Your best bet is to either use iMovie HD (v6.0.4 available free online to iLife '08 users). It is either that or learn how to create such effects externally with other applications like the JES Deinterlacer (free) or QT Pro ($30).

  • How can i delete the duplicate pictures and movie clips on my macbook pro

    how can i delete all the duplicate pictures and movie clips on my macbook pro. it is telling me i have no memory

    By 'no memory' may I assume you are out of space on your hard drive?
    Obviously you can delete them one by one, but this is tedious and will take a long time and you wish to do this quickly and efficiently.
    This is my suggestion and it may not be worth a lot:
    If all of your duplicates have a unique characteristic common to them that the originals do not, this MIGHT work.  For example if you make a duplicate of an image, it will have the same title as the original, but will insert the word 'copy' in its' title.  (It should do some thing similar with movie clips).
    Go to Spotlight in System Preferences.  Click on Privacy (near the top of the pane) and then the + sign (near the lower left hand corner).  This will result in a drop down menu.  Select all the places you do not want Spotlight to search.  You should leave only Music and Movies unless you have pictures/movie clips in other places.
    Enter into spotlight the unique characteristic (ie; copy) and it should (I hope) list all your duplicates.  Perform a Select All, and put them in Trash.
    Otherwise do them one by one or write an Apple Script Program.
    If my convoluted idea does not work, perhaps you will be lucky and a more savvy person with a real solution will come forth!
    Caio.

  • How do I change the speed of a video clip after making it a Smart Object?

    In order to apply the same Camera Raw filter to every segment of a clip I was going to split multiple times, I converted the whole clip to a Smart Object, applied my Camera Raw filter settings, and then split the clip and deleted some portions.  Now I want to make certain portions of those clips slow-motion, but even if I right-click on the right side of the layer and select "Clear Smart Filters", all I see when I right-click on the clip in the timeline are the motion options; I can no longer change the speed or the audio.  Is there a way to do this without having to make all the cuts in the beginning, changing the speed and the audio, and then having to go back and convert each individual segment into a smart object and then apply the same ACR filter to each one?

    Brett,
    Thanks for addressing this question.  I tried it and see that the embedded file is the entire clip that I started with, not the trimmed version that I turned into a SO, but at least I could go back and make a change that way in a pinch. 
    If you wouldn't mind looking at this video between :50 and 1:40, and tell me if you think that AE or PP would give me significantly better results in the jumping segments where I slowed it down to 25%:  2014-06-26 And the last thing I expected to see jump out of the box was Albert Einstein! on Vimeo.  I am trying to keep my expenses down by only using PS CC for video editing, and love the Camera Raw filter capabilities.  By using PS CC it also lets me lay down my audio and edit to the audio w/o, as Mylenium suggested, outputting my file from PS CC into either AE or PP to do the slow-mo part. 
    Thanks again for your help!
    Tara

  • How can I change the speed of a video clip?

    hi, I'm a new user of iMovie 08.
    I fail to find the function button that can make a video clip slow down or faster, such as change the speed to 60% of the normal speed,etc.
    I know iMovie 06 has this function,it's in video FX,duration,speed...but I can't find the menu in iMovie08.
    Is there anyone knows where it is?
    many thanks!

    Upgrade to iMovie 06.
    Slow / Fast Motion is easy with iMovie 06.
    iMovie 06 is a free download to iLife 08 owners. (THEY WANT YOU TO HAVE IT!)
    http://www.apple.com/support/downloads/imovieHD6.html
    Much has been written about the differences between iMovie 06 and iMovie 08. I have found the below link to be helpful.
    http://www.geethree.com/slick/imovie8.html

  • How do you move the point where an audio clip attaches to a video clip?

    I'm talking about the little carrot that sticks from one clip to another to indicate the point where the cips are syncronized. How do you move their position? Thank you!
    Eric

    The manual says ...
    Adjust the connection point of a connected clip
    By default, connected clips and storylines are connected to the primary storyline at their first frame, but you can move the“connection point” of a connected clip or storyline. This is useful when you want to connect a specific frame or audiosample in the connected clip or storyline with a specific frame or audio sample in the primary storyline.
    Hold down the Command and Option keys, and click the connected clip (or the gray border of the storyline) at thepoint where you want to position the connection point.
    The connection point is moved to the point where you clicked.
    For other things ... If you want to move the audio clip in relation to the video clip just click on it and drag it to the left or right.  This is when your audio clip is a separate clip from your video clip.  If you want to move the audio that is part of a video clip, you first have to select that clip then choose Clip/Break Apart Clip Items then do one of the things listed above.  Best wishes.

  • How do u adjust the background sound in a clip in a trailer on the new iMovie?

    On the old version i could do this quite fine but now i cant even find a way to do this.

    Do any of these or combination of.
    1) Click and drag any of the 4 corners.
    2) Top right coner you will see double headed arrow, click it, when you want to go back to your 'Normal' preset size press Escape key.
    3) To Zoom in do a two fingar double tap on Trackpad, see System Preferences for Trackpad settings

  • How can I vary the volume within an audio clip, not just the ends, but throughout?

    This is what was easily done in FCE by clicking to make points on the volume line, then dragging them up and down to fade music up and down during voice overs. If it's the the manual, I could not decipher it. Thank/s for any help.

    How to add audio keyframes: http://www.premiumbeat.com/blog/fcp-x-audio-tutorial-part-3-using-final-cut/
    or is you like video: http://www.youtube.com/watch?v=CsrLxqaY_f0

  • How do I change the speed of the Final Cut Pro X "Ticker" Title option?

    I am moving from iMovie to Final Cut Pro X.  I used to use the "ticker" title option all the time in iMovie, but when I utilize it in Final Cut Pro X, it scrawls really slow and only shows the first line of text before the video ends.  How do I adjust the speed of this option?

    This Motion template effect isn't very useful at the moment.
    Sadly, the only way of changing the speed is to modify the effect in Motion.
    The speed is designed to get the word 'Information' at the default size and default typeface across the screen over the duration of the clip. If you add more text, or change its size, the text will not move off the edge of the screen by the end of the duration of the generator.
    Alex4D

  • Changing the levels of a Audio Clip.

    Hi!
    I'm new to Soundtrack pro - I've got it pretty much fgured out but I'm having a hard time figuring out how to adjust the levels of a specific audio clip that is sitting in the timeline. I see that I can adjust the levels for the entire track but I don't want to do that, I need to adjust the levels of an audio clip without effected the other clips on the track.
    I know you can do this in protools, as you can make the levels of a track go up and down at certain points in the timeline. This is all I need to do, thanks.
    -Drew

    Look for the Volume Envelope under the audio track. Double click to make breakpoints.
    !http://rdiv.com/screenshots/STP_volumeEnvelope.jpg!

  • How can I adjust the clip speed in the editing window of Premiere Elements 11?

    In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
    But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
    Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
    So, is this function really gone? I couldn't emagine why! Or how is this done now?
    Couldn't find any post or video, explaning how to do that now.
    No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
    And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
    I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
    Thanks in advance!

    SG
    An interesting point that you point out
    "However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
    I am assuming that you are referring to an earlier version of Premiere Elements,  having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
    In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
    On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
    ATR

  • Adjusting the speed of live font

    I have my text typed in and the effect I chose in live font but when i adjust the speed slider it just extends the length of the clip not the speed of the effect. The effect is very slow right now, any idea on how I speed it up?

    it just extends the length of the clip not the speed of the effect.
    Make sure that the purple effect track is selected (click it once) before changing the speed in the Inspector.

  • Adjusting the speed of "basic motion"

    Hi, I'm new to Motion so sorry for the simple question!
    I have some video footage with a Basic Motion behaviour attached to it. I try adjusting the speed slider but it doesn't move along the path any faster or slower. It just stays at the same speed, which is just far too slow for what I'm wanting to do.
    So my question is, how can I make objects move at a faster speed along a path?
    Thanks.

    If I'm understanding your issue properly, (I assume you're talking about a Motion Path behavior) all you should have to do is adjust the length of the Motion Path behavior in the timeline. Shorten it if you want to speed it up, lengthen it if you want to slow it down.

  • MUSE: How do you adjust scroll speed in parallax site?

    My site is 1 long page.
    I have put anchors in different sections to mark the places where I want to scroll to when I click on the menu
    (I have removed all links to other pages on the menu and replaced the hyperlinks with the anchors).
    The site works, but the menu doesn't seem to be able to keep up with the rest of the content when I'm at the bottom of the page and I'm scrolling to the top via the menu.
    How do I adjust scrolling speed based on the distance between the current view and the section of the page I want to scroll to?

    That's exactly what I was looking for, thanks!
    Your solution also led me to finding this: http://css-tricks.com/snippets/jquery/smooth-scrolling/
    So I think I'll do it that way.

Maybe you are looking for