How do I align stroke brushes on path starting at the end of a path?

Hello,
I made a path with no fill and a stroke. I copied this path in place and made a "brush-arrowhead" as you can see in the image below. This allows me to get a look that arrays my arrowhead across the entire path. My issue is that where I started the path (not show in image), the brush applies the first "arrowhead" brush (which I created) at the beginning of my path. As you can see, the end of the path doesn't look so nice because the arrowhead brush does not end evenly based on the varying distances of each path. I would like my paths to end with an arrowhead, yet still have this "array" look.
Simply put, is there a way I can dictate which end of my path (end point or start point) my brush "arrowhead" begins from?
Many thanks,

naturescape_peopletecture wrote:
and made a "brush-arrowhead" as you can see in the image below.
To answer your questions need to know who you made a brush arrowhead.
The default arrowhead are specifically designed with a bounding box designed to not have this problem, and even have this option
You are wanting arrows in the middle of a line so would recommend a scatter brush.
And a stacked appearance with 2 strokes.
Though you may not like who the dashes are lining up here so if you go back to the first method I show, you can do a few paths too get this.

Similar Messages

How can I Read lines of data from a file starting at the end of the file??

Can anyone help me with how to read lines of data starting from the end of a file instead of the beginning?? I do not want to load the entire file into memory as the files are very rather large. Instead I want to start at the end of the file and read lines backward , until I find the particular data item i am searching for, then stop.
Can this be done in Java ? I know it can be done in Perl.
Thanks.

Thanks for your suggestion about the RandomAccessFile, I did actually thought about that approach , but wasn't sure it would work.
I do not want to read the file in a sequential forward manner because the files contain large number of lines of data that have already been processed and therefore there is no need to reprocess these lines of data.
The Unprocessed lines are always at the the end of the file and these are the data lines I am interesting in getting at without having to read the entire file. Therefore, i figure that if I can read the data from the end of the file then this would be much more efficient.

I have a free app on my iphone, i would like to get it to my ipad..how do I get it without having to start over the entire game?

I have a free app on my iphone, i would like to get it to my ipad..how do I get it without having to start over the entire game?

If you use the same Apple ID on both devices, you can share apps, but you won't share the progress I'm afraid.

How do I get my brushes to show up in the dropdown list?

I'm fairly new to Photoshop. I'm using CS6, and I'm having a little trouble. Mostly, I have a lot of brushes, but not all of them show up in the dropdown menu for brushes:
So, how can I fix this, if there is a fix for this? Any help is much appreciated. Thank you!

Is there a way to further divide brush sets into groups? I agree that is an unmanagably long list, and I bet most of them are never used. It looks like Windows 7, so the brushes live in
C:\users\your user name\App Data\Roaming\Adobe\Adobe Photoshop CS6\Presets\brushes\
I've never tried adding a folder to the brushes folder, but even if it is still recognised, I suspect it would not not change the look of that list. I'll have a try though, out of interest.
Here's an idea. Find the above folder, and right click and send to desktop as shortcut, and place another shortcut to a master list of brushes right next to it. Open both, and drag groups of brushes into and out of the brush folder on those rare occassions you need them. Wouldn't it be nice if you could incorperate such a feature into a custom workspace?
[EDIT] Well I just tried, and Photoshop CC sees the contents of sub folders in the Brushes folder. That would help with my weird little idea above, and while my brush list is nothing like the OP's, it is bordering on being too big to be comfortable.

How do I extend (i.e. add more points to the end of) a Bezier path?

What's the easiest way of making a Bezier path longer by adding more points to the end? I can do it by moving the end point to where I want the new end to be using the Direct Select tool, then using the Add Point tool to replace the old end point and then add the new points I want between the old end point and the new end point. But it's very tedious and there must surely be a better way. I just want to continue adding points like I did when I was creating the path in the first place.
I'm using CS2, so I need some technique that works with this version.
Thanks - Rowan

Rowan,
You can just use the Pen Tool again and Click, or ClickDrag from, the end Anchor Point.
The result will depend on the combination of the ways the point was made when ending and starting again:
Click/Click > normal corner point,
Click/ClickDrag > corner point with Handle on new segment,
ClickDrag/Click > corner point with Handle on old segment,
ClickDrag/ClickDrag > smooth point with (probably different length but parallel) Handles on both segments.
You may try out the combinations quickly and see it happen, just hitting the P key to start anew.

How to get substring from string starting from the end of string

Hi
How to cut from string:
$A=C:\ClusterStorage\Volume1\WXP-plwropc300\Virtual Hard Disks\WXP-PLWROPC300_EE20E00F-315E-4781-A6DE-68497D4189B8.avhdx
this substring (name of VHD file): WXP-PLWROPC300_EE20E00F-315E-4781-A6DE-68497D4189B8.avhdx
This script should be universal so the best way to be cut all leters from the end of string $A till get the first mark \
Thank you for help.
Tomasz
Kind Regards Tomasz

PS > Split-Path 'C:\ClusterStorage\Volume1\WXP-plwropc300\Virtual Hard Disks\WXP-PLWROPC300_EE20E00F-315E-4781
-A6DE-68497D4189B8.avhdx' -leaf
WXP-PLWROPC300_EE20E00F-315E-4781-A6DE-68497D4189B8.avhdx
PS >
That is what "Split-Path" is for:
¯\_(ツ)_/¯

How can I record narration with no video or beyond the end of my video in iMovie?

I have a question about recording narration in iMovie.
I wrote a script to read as the narration for a movie I'm making. My thought was I could record the narration first, then add video to match the spoken words.
I've done this before in Sony Vegas on my PC and it worked out well, better than trying to speak to what was going on in the video after I record the video.
Unfortunately, if I try to record narration in iMovie without any video being there yet, it won't record. It appears I need to put a video clip on the timeline first.
If I put a short clip in and try to record narration beyond the end of it, iMovie quits recording at the end of the video clip.
So I went to quicktime and recorded my narration there and have 10 audio files (since I just don't seem to be able to read this whole script without making mistakes).
I then tried to add all 10 to my movie and I think it made me add a video clip first, but after I did, iMovie overlayed all 10 audio files on top of each other.
If I try to drag them over one at a time, I still can't get them to go sequentially unless I add more video to my movie.
There must be a way to add audio files or create narration without having to create a video file longer than your audio first. Isn't there?
I just can't seem to find a way to get the audio files layed out one after another without more video. Very frustrating.
At this point, I really want to know how to add audio files beyond the end of my video since I have them all recorded.
But I'd also like to know how to record narration beyond the end of the video too for future projects.
Thanks!
Brad

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

How do I get rid of empty space left at the end of my project?

My first posting here - I'm glad to find this community!
I've been working on a project . . . editing it down from its original length, but the empty space still exists at the end of my timeline. I want to remove it, since I'm posting the project online, but I can't figure out how to eliminate it.
Please help! Thank you!
Sara

welcome Sara to the  boards...
sometimes, we recognize 'stray clips' at the very end.. that is clip is often just a single frame of video...
a) enlarge the timeline view to max. ... anything in sight?
b) switch to 'slide view' mode.. sometimes, such a stray-clip is shown as a 'blank black' clip...

How can I find out which DLL version is on the end-user's computer?

I'm working on an installer program and I was wondering how I can find out what version of a DLL is on the end-user's computer, furthermore I would also like to find out if the file is locked in memory. Is there a way to do this? I figured natively there wouldn't be but does anyone know of a C++ wrapper or so?

I'm not aware of any way of seeing the list. Have you had other computer's in the past and/or updated the OS on your current computers without first deauthorising them ? Deauthorising all (which you can only do once every 12 months) won't remove any content from those computers, it just means that you won't be able to use the account's content on a particular computer until you've reauthorised that computer

How to insert the file name to the start and the end of a SQL file by a powershell script

I just began to learn powershell script and I have a problem that I cannot figure out. I have a lot of .sql files. I need to insert its file name to the beginning of the file (After USE statement) and the end of the file (before the last END statement). Is
there anybody knowing how to do this?
Thanks so much
Regards

Actually, I want to add a insert SQL statement to the beginning of the file and the end of the file. Only the file name is a variable and different among
different files. All the other sql statements are the same and can be hard coded. Hopefully it helps –
The problem I think is that I want to add the same thing (except the file name) to hundreds of sql files and only the file name is different. I do not want
to add it manually and want to use a script to add it –

HT5312 How can you fix a email with a .con at the end

Well, everytime i try to reset my security questions, the password is sent to a email with a .con at the end. Does anyone know how to change the email, because it won't let me.

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94610)

How to use retouch/clone brushes with loupe staying over the object

I would like to keep the loupe stationary over an object while I use my Aperture retouch/clone brush. Help!

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

How to add date in MM/DD/YYY format at the end of a string

Hi
I want Description to look like
' PARTICIPATION ON TEMPORARY TV SHOW EXPIRING ' and include the "latest show expiration date" as "MM/DD/YYYY"
Pls help ......
try {
                        Date date= new Date();
                         System.out.println("THE TODAYS DATE is :"+date);
                           DateFormat df = new SimpleDateFormat("yyyy-MM-dd");
//                         DateFormat df = new SimpleDateFormat("MM/DD/YYYY");   -----> Its not allowing this format ????????
                         begin_Date = hashDateE.get(id);
                         System.out.println("THE LATEST TV SHOW DATE is :"+begin_Date);
                         Date d1 = df.parse(begin_Date);
                         String relation;
                         if(d1.equals(date))
                              relation = "both the dates are same";
                         else if(d1.before(date))
                              relation = "BEFORE";
                         else
                              relation = "AFTER";
                         //System.out.println(d1 + "is" + relation + ' ' + date);
                         if("10".equals(latestShow)){
                          if("BEFORE".equals(relation)){
                               System.out.println("The latest show date is expired");
                          Code =3;
                          Description = "PARTICIPATION ON TEMPORARY TV SHOW EXPIRED ";
                          else if("AFTER".equals(relation)) {
                               System.out.println("The latest show date is non expired");
                              Code = 2;
                               Description = "PARTICIPATION ON TEMPORARY TV SHOW EXPIRING" + d1; -------------> I TRIED THIS WAY ( d1 should be in this format MM/DD/YYY
                          }else {
                               System.out.println("The latest show date is non expired");
                             Code = 20;
                              Description = "PARTICIPATION ON TEMPORARY TV SHOW EXPIRING" + d1;


If you have a string like 2008-12-15 and you want to interpret it as a date and format it as 12/15/2008, then you need two DateFormat objects.
One to parse the String in the first format into a Date, -------> i could do this
try {
          String begin_date = "2008-12-15";
          System.out.println("The begin date is :"+begin_date);
          DateFormat df = new SimpleDateFormat("yyyy-MM-dd");
          Date d1 = df.parse(begin_date);
          System.out.println("the Date value is d1 :"+d1);
catch() {
}Output is :The begin date is :2008-12-15
the Date value is d1 :Mon Dec 15 00:00:00 EST 2008
Pls help me with the second part :- ?????/
and one to format that Date into a String in the second format. MM/dd/yyyy --- how to do this ..after i tried several times with different statements , i am asking this piece of code to achieve this

How do i stop programmes opening when i start up the computer

When i turn the mac book on it keeps opening all my programmes. How do i stop this?

Remove the check in this box when you log out:

How do I get rid of this annoying tag at the end of my wordpress posts: // ![CDATA[ div id="" class="_mp3rocket_overlay_style" style="left: ; top: ; width: ;

Whenever I post on my blog, this shows up at the bottom:
<pre><nowiki>// <![CDATA[
<div id="" class="_mp3rocket_overlay_style" style="left: ; top: ; width: ; height: ">
// ]]>
</nowiki></pre>
How do I get rid of it?

Does the name mp3rocket ring a bell?? It may be related to a browser add-on. You could check for and possibly disable or remove such an add-on here:
orange Firefox button ''or'' classic Tools menu > Add-ons
Try both the Plugins and Extensions categories.
If it doesn't seem related to an add-on, perhaps it's something added by a Wordpress plugin, or your blog theme. If you provide a link to your blog, a volunteer here could take a look and see whether they get the same text.

How do I align stroke brushes on path starting at the end of a path?

Similar Messages

Maybe you are looking for