How do I allocate more memory to my 1st Gen and 4th Gen to stop Safari crashes?

How do I allocate more memory to Safari to stop opening crashes?

Have you tried any troubleshooting?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

Similar Messages

How do i allocate more memory to my iphoto application? i am unable to add more photos to my library i keep getting a pop up saying not enough memory in my application

how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

How do I allocate more memory to Photoshop CS5?

I'm using a number of plugins with Photoshop, and Photoshop often closes automatically or freezes. The plugins use considerable memory (>1GB) and the problem may be that there's not enough memory allocated to Photoshop + plugins. Under preferences, it lists 2100 MB allocated. I have 16 GB of ram available. How can I allocate, let's say, 4 GB to Photoshop to see if this eliminates the problem?

Here's my Photoshop Elements info. Do you have yours maxxed out at 100%? I have 12GB total. I guess that's all you can do.

How do I add more memory to integrated video graphics on Satellite L30

I want to allocate more memory to my video graphics.
How do I do this?
I'm using Vista Home OS.
Many thanks.

My laptop model is SL30 (PSL33) and I'd assumed it was shared graphics.
I've maxed the RAM to 2GB, but since upgrading to Windows 7, I keep getting video graphics error messages for games I could play before in Vista.
Toshiba doesn't seem to have an updated graphics driver for Windows 7 yet, and I'm guessing this is the problem.
Does integrated graphics simply use all the RAM you have available or do you have to manually increase it?
Pete

How do i get more memory on my mac book air? is says that i can add 2 more gig how?

how do i get more memory on my mac book air? is says that i can add 2 more gig ??? or wat files can i delete

Macbook Air memory is soldered to the logicboard.
You can only get 4GB or 8GB (2012 Models) in the Air when you order it that way. Otherwise, you're stuck with 2GB.
Unless you're talking about hard drive space - then it is upgradeable - click HERE to see which one corresponds to your model.

How do i get more memory installed on my macbook air

How do i get more memory installed on my macbook air

If you are referring to RAM, the Air's RAM is not an upgradeable component. The RAM memory is soldered to the main board, and there are no expansion slots.
It is the price Air owners pay for miniaturization. Every Air is manufactured with all the memory it will ever have. Shop wisely.
It is technically possible to upgrade the SSD storage though, but will probably void any warranty.

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

Depends on the Mac; what model and processor is it?
 > 'about this Mac' > 'more info'
In the first section (hardware overview) post this info;
Nothing below that is reqd, especially not the serial number.

How do i install more memory in my macbook air? it only has 4GB

How can i install more memory in my macbook air? it has 4GB only and it keeps telling me my start up disk is full.

Welcome to the Apple Support Communities
In the case of the MacBook Pro with Retina display and the MacBook Air, memory is soldered into the logic board, so you can't add more memory after buying the MacBook.
However, memory isn't your problem. One thing is the memory and another thing is the hard drive, and you are running out of space in the hard drive, not in memory.
To fix this, just delete files that you don't need, or move them to an external drive, in order to make free space on your MacBook

How can I add more memory to my iPad?

How can I add more memory to my iPad?

Memory refers to RAM, and can't be increased.
I asume you mean storege space (like 16GB, 32GB, etc). It also can't be increased.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How can I add more memory to my iPod touch

How can I add more memory to my iPod touch?

You are not able to add memory to a iPod Touch.
The only way to get more memory is to buy one with a larger capacity.

How do I add more Memory to the 2 open slots in my iMac - it is 4GB now

How do I add more Memory to the 2 open slots in my iMac ??? It is 4GB now and I get the spinning beach ball often when several Apps are running.
Does the Apple Store sell and install???
Please advise if you have upgraded your iMac memory

Go to a website such as OWC or Crucial's, determine which type of RAM your computer needs, and buy it from that site. They provide installation instructions on the site.
(115474)

How do I get more memory for my Macbook Pro Spring 2010 13-inch with 2.66GHz Intel Core 2 Duo?

How do I get more memory for my Macbook Pro spring 2010 13-inch with 2.66GHz Intel Core 2 Duo. Apple says no memory currently available for that model. I have 4 GB memory and 3.99 used. Help!

macette1976 wrote:
Now I'm confused. This is the one Crucial told me to get:
CT3309356 - 4GB DDR3 PC3-8500 Unbuffered NON-ECC 1.35V 512Meg x 64
$45.99
Also what do you mean that actual memory is 16GB but with Apple it's 8?
When I go to the "About this Mac" it says Memory 4G 1067 MHz DDR3, then when I go to System Report it says
Memory Slot
Bank 0/ DIMM0 2G DDR3 1067 MHZ OK
Bank 1/ DIMM0 2G DDR3 1067 MHZ OK
Sorry I'm clueless. Just don't want to buy something that messes up my machine more than it already is.
The Crucial site appears to have recommended the correct spec 4gB RAM stick for your model. Please note that you will need to remove the existing sticks of RAM to install new, so you will need 2x4gB to get to 8gB.
When your model of computer was designed/built, it was tested with readily available 2x4gB (8gB). After release RAM retailers have tested it with higher amounts, and Apple didn't update their quoted specs.

How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite!

How do I add more memory to my Imac, I only have 1GB of memory and need 2GB to download Yosemite?

Janet,
This is why the question rkaufmann87 asked about your model is so important:
[click chart to enlarge if needed]
The list covers the early iMacs with Intel processors that shipped with either OS 10.4 or 10.5 and have only two RAM slots. As you can see, some have limits to what version of OSX you can install. If the step rkaufmann requests does not narrow down your model, you can do one more thing.
While the "About this Mac" window is open, click the "More Info..." button at the bottom of that window to get this (assuming you are really running OS 10.5.8 as shown in your profile):
The code I've indicated with the red arrow corresponds to the codes in the second column on the chart. Post the code your computer reports--again don't post a serial number.
If your iMac shipped with only 1GB RAM, I fear it is one of the earliest models that cannot be upgraded all the way to Yosemite.

How do I give less memory to my boot camp and more to my Mac HD?

I had a friend set up my Bootcamp for me. (He is great with this type of thing and I had no clue.) I used to have a job where I needed to use Windows to run my work program. So he gave a certain amount of my memory to that and left a certain amount for my Mac HD. However, I no longer have that job and I am only using my Bootcamp to run one Windows program. I rarely use it but still need it.
I now want to make it so that I have more memory on my Mac HD and less on the Bootcamp. If anyone can tell me how to do that it would be so greatly appreciated! Thanks in advance!
I have a MacBook running Lion 10.7.3. Processor 2 Ghz Intel Core 2 Duo, Memory 4 GB 1067 MHz DDR3. Here is some information from the System information if it is helpful:
Volumes:
disk0s1:
Capacity:    209.7 MB (209,715,200 bytes)
BSD Name:    disk0s1
Content:    EFI
Macintosh HD:
Capacity:    132.5 GB (132,495,007,744 bytes)
Available:    1.62 GB (1,618,046,976 bytes)
Writable:    Yes
File System:    Journaled HFS+
BSD Name:    disk0s2
Mount Point:    /
Content:    Apple_HFS
Recovery HD:
Capacity:    650 MB (650,006,528 bytes)
BSD Name:    disk0s3
Content:    Apple_Boot
BOOTCAMP:
Capacity:    26.69 GB (26,686,259,200 bytes)
Available:    9.36 GB (9,356,976,128 bytes)
Writable:    No
File System:    NTFS
BSD Name:    disk0s4
Mount Point:    /Volumes/BOOTCAMP
Content:    Microsoft Basic Data

The only other way is to erase the Windows partition and start over.
You have about the bare minimum partition size for Windows with 26 gigs now so a few extra taken back wouldn't really help much. You only have 9 gigs free space available so in theory you could only take away 6 gigs or so and still leave enough room for the OS to work.
You need to have an extra 15%~ of extra space (on any OS) for any updates or installers to expand and install the software, they could take up to twice to three times as much room to expand from the original installer file.
If you need more room then you may want to look at maybe a larger main HD, (especially if it's the original drive, gettin old) an external HD or even a USB stick for the extra room you need. A 32 gig USB thumb drive is around $30 now, (on sale) way more capacity then you would get back from the trouble of repartitioning.
My 2 cents worth anyway........

While sync : can't allocate more memory !!!(WCE)

Hi All,
I'm synchronizing (/Orace/mSync.exe) several MB of data (not much more of 10 MB) on a CASSIOPEIA E-200 (64 MB) with a SD Card extension of 128 MB. While synchronizing, main memory decreases dramatically (main memory, not external memory) and finally i get the message:
-2000 can't allocate more memory -2000:0
Other synchronizations with a smaller amount of data are working ok.
It is posible for a sync of ~10 MB to drain >40MB of main memory?? !!
By now, i'm using the SD Card directory to store the synchronized client DB, but this is not enough to solve the problem.
I think that temporary files and processes on main memory are involved in this problem. It is posible to use memory cards for this??
Some ideas????
Thanks in advance.
Andris

Humm,
I think the problem may be the size of a single table replication.
The replication of 10000 registers from this table is working ok, but replicating 25000 i get the error ("Can't allocate more memory").
Anyone knows a limitation in the number of registers or size of a table replication????!!!
Thanks!!
Andris

How do I allocate more memory to my 1st Gen and 4th Gen to stop Safari crashes?

Similar Messages

Maybe you are looking for