How do I allow meeting participants to control the volume of an audio file in Adobe Connect 9?

The feature of changing the audio volume as a participant in an Adobe Connect meeting seems to have gone away in version 9.
It is missing on both audio and video files, and I am currently losing paying customers because the volume is either too low or too high.
How do I give my users audio volume control again?

Select all of your audio, go to the Modify > Audio > Apply Audio Normalization. It will bring all clips in each track to be the same level. Then, later, you can do your final mix much easier.
Or go to Window > Arrange > Audio Mixing and you'll have an on-screen mixing board to work with. There's a speaker icon in the top right, green keyframing is on while you mix in realtime during playback, gray, keyframing is off.
But use the first method first, for sure. Open the audio mixer after that, you'll save yourself a ton of work and time.
Message was edited by: BenB

Similar Messages

How do you control the volume of multiple audio tracks

Hi
I have about eight tracks of audio in my Finalcut timeline. When played, sometimes the music track will be much louder than the narration track or the FXs track will be louder than the all tracks.
How do I lower or raise the volume of tracks so that the track that needs to heard is heard.
I dont want to do an all out mix yet. I'm just building tracks
Thanks

Select all of your audio, go to the Modify > Audio > Apply Audio Normalization. It will bring all clips in each track to be the same level. Then, later, you can do your final mix much easier.
Or go to Window > Arrange > Audio Mixing and you'll have an on-screen mixing board to work with. There's a speaker icon in the top right, green keyframing is on while you mix in realtime during playback, gray, keyframing is off.
But use the first method first, for sure. Open the audio mixer after that, you'll save yourself a ton of work and time.
Message was edited by: BenB

How can I control the volume in a Appletv movie from my remote control App. In my IPad ?.

How can I control the volume in a Apple Tv movie from my remote control App. In my IPad ?.

There is not now, nor has there ever been a version of flash for any iOS device.
Adobe has abandoned mobile flash, so there never will be.
Browsers like iswifter or photon may work for you, but don't hold your breath.
Check app store for an app of whatever game you want.

How do I control the volume so all my songs are the same loudness

On my older IPOD, one song plays soft, then the next is too loud. How can I control the volume so they are all the same loudness?

See the playback section (more specifically the Sound Check option) of this Apple support document for a possible suggestion.
http://support.apple.com/kb/ta38521?viewlocale=en_us
B-rock

How do you control the volume to the earphones?

How do you control the volume to the earphones?

Apple Support Communities updatesActually I knew that part of it, but I had to go to Settings to correct something. They are working now that I fixed something that I have no recollection that I altered in the first place, nor do I now know what in heaven’s name I fixed this time. All I know is that I must have gone to setting a million and one times and the last time was the one I did something right.
Thank you for your help however.
Nan
From: Apple Support Communities Updates
Sent: Monday, July 07, 2014 10:43 PM
To: nandave
Subject: - How do you control the volume to the earphones?
                                                                                You received a reply
                                petermac87 has replied to your question. You can view the full discussion in Apple Support Communities.
How do you control the volume to the earphones?
                                With the volume up and down keys unless you purchase a set with a volume control connected to the chord.
                                Pete
                                                                                Correct Answer Helpful Answer
                              Use the buttons above to tell petermac87 and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
                              To reply to petermac87, go to the discussion in Apple Support Communities.
                              You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
                              TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
                              All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

How to control the volume of all sounds in the movie (even if they were in the time line (no instance name)

Hi,
I need to control the volume of all sounds in the movie even
if they were in the timeline so they do not have an instance name,
by AS3.0 code?
thanks a lot.

:
var st:SoundTransform=SoundMixer.soundTransform;
st.volume=whatever;
SoundMixer.soundTransform=st;

How can I control the volume of songs played through AirTunes?

I have an AirPort Express, with which I use to stream my iTunes music library through an external pair of speakers.
But whenever I use the volume keys on my keyboard, it only adjusts the system volume, not my AirPlay Speakers.
Is there a way for me to control the volume of my AirPlay Speakers through the volume button on the menu bar?
Or do I have to download some sort of third party app?
Thanks.

If you are playing it through Airplay from your itunes you can adjust the volume by clicking on the Airplay icon and selecting multiple
Of course if your playing through something like a Bose Soundock you need to manually set the max volume on it and Airplay works within that limit

How I can know if a user has the permission to read a file or not ?

Hello,
I have other question :
How I can know if a user has the permission to read a file or not ?
Smaine
ThanK's

I don't think common operating systems have an easy way to do that check.
If you have a limited number of files, implement access control yourself, instead of using operating system permissions. E.g. write a configuration file that contains:
# Syntax: "filename": "list of users who can access that file"
somefile.txt: fred, alice, bob
somedir/anotherfile.txt: bob, joe
Read in the configuration file and check against it when a file is being requested.

Is there any way to control the volume on my Apple TV?

Here's the scenario: I have a small amplifier under my couch that controls the speakers connected to my Apple TV. When I use Airplay from my iPhone to listen to music, I'm able to control the volume right from the music App on my phone- this is perfect because I don't like to reach under the couch to change the volume. However, there are two scenarios when I cannot seem to adjust the volume anywhere except on the amp. These are:
First: Using Airplay while playing a video from my MacBook Pro to the Apple TV. In this case, the volume slider in iTunes suddenly has a little lock icon on it and is unadjustable. Is there any way to unlock the volume?
Second: When using the Apple TV directly to play any media- music or movies. The volume up and down buttons on the Apple TV don't control the volume. I'm forced to reach under the couch to adjust the volume- which happens quite frequently. Is there any way to control the output volume of the Apple TV?
The lack of volume control has been super disappointing. I've been a (multiple) airport express user for years so kind of expected Airplay to work the same for video- with the ability to control the volume from whatever device was transmitting. Can anyone help me?

Andrew- this is how I would expect things to work. However, when I use airplay from my iPhone to say, play a youtube video, the volume on the phone is suddenly rendered useless and I'm forced to adjust the amplifier. When I just play audio from the phone, the volume works.
It's the same on my macbook pro. If I mirror the screen, my computer's volume affects the speakers volume. However, if I am in itunes and play a movie and use airplay for that, I get a lock on the volume. Is this a setting somewhere?

Is there a way to control the quality of my pdf file when exporting from a .pse file?

Is there a way to control the quality of my pdf file when exporting from a .pse file?
Hi,
I have 2 pages in all in a .PSE file.
When I try to export it as .PDF, the quality is very poor. I cannot change it to a better quality.
Please advise how I can export the file so that i can have better quality.

Rik Ramsay wrote:
To expand a little on what Jongware said, normally choosing vector over bitmap will decrease the filesize. If the vector art is very complex though, this will not be true.
Yup, a logo as bitmap takes up more space than the same as a vector -- unless the vector image is bitmap heavy (think Drop Shadow, Outline Glow; these are actually bitmap effects).
Also, check your PDF version. "Older" versions do not support live transparency, the latest do. Then again, you cannot use live transparency if you suspect your viewers may be using Mac OS X, because Apple's own PDF viewer sucks big time.

HT1595 my remote controls the volumes on my laptop

How do I stop my apple tv remote from controlling the volume on my laptop. I want to use the apple tv remote only for apple tv and nothing else

Welcome to the Apple Community.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences > Security > General, click on the Advanced button in the bottom right corner - If the button is greyed out, click on the lock icon and enter your administrators password))
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

Is there an app to control the volume of an iPhone 3GS?

I have an iPhone 3GS and the volume keeps going all the way down once I plug the headphones in. Before this started happening the volume would go all the way up. Before that even started happening the phone would repeatedly try to shut itself off and I had to keep pressing Cancel.
I did buy the phone off of eBay used, to try and go on a prepaid contract once my current contract ends. On the case itself, there are some minor scuffs and such, it does look like it was opened at a time. It still works perfectly, except for the volume glitch right now. Is there an app that controls the volume to keep it from going all the way down?. People say in forums and such to tighten the screws on the bottom (which I tried), and to also open the phone and see if there is anything blocking the volume control thing (like dust or anything) but I'm afraid to try that with the risk of causing further damage. What should I try?.

to at least try and fix it if none of that works then replace it through apple

HT1947 Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Can I control the volume of my MacBook Pro with the remote app on my IPhone or IPad?

Welcome to the Apple Community.
To an extent yes. You can't control the master volume, but tou can turn the volume up and down, up to the maximum set manually on your computer.

I keep getting the message: "what should firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!

cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway.

How do I allow meeting participants to control the volume of an audio file in Adobe Connect 9?

Similar Messages

Maybe you are looking for