How do I, and what do I need to burn a DVD that works in a regular DVD.....

player, I burned a movie I got of of itunes twice to blank DVDs but neither one will play in our DVD player. What am I doing wrong?

If you have a Super Drive in your MacBook, you can use the Disk Utility to make a disk image from an unprotected DVD (for example, one that has been burned before is not copy-protected). As the "format" for the disk image, you can choose "CD/DVD Master". Once you've created a disk image, you can use the Disk Utility again to burn that image to a blank DVD.
-Doug

Similar Messages

How to review functional specs and what are points need to prepare

Hi ,
how to review functional specs and what are points need to prepare as questionaire..please do needful help

Hello
It seems you haven't had a chance to view the forum [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement] yet. I have provided the direct link for you.
Please share SAP PI technical specs
Please familiarise yourself with the Rules of Engagement. This thread is being locked.
Regards
Moderator

Hello, i currently run 10.5.8 and would like to upgrade to enable me to pair my phone with my mack, how do i do it and what do i need to buy ?

hello i currently run 10.5.8 and would like to upgrade tp pair my i phone and stop e-mail probs, how do i do it and what do i need to buy ?

You first need to purchase and install OS X 10.6 Snow Leopard.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Also, it wouldn't hurt to increase the RAM in your iMac.
Your year and model iMac can take 4 GBs of RAM. Out of that amount of RAM, the 2006 iMac will recognize between 3.1 and 3.4 GBs of that total RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Once OS X 10.6 is installled , you will need to use OS X Software Update function in OS X's System Prefernces Panel to update to OS X to OS X 10.6.8. This will give your iMac access to the Mac App Store.
If you wish, your iMac year and model can only be updated to OS X 10.7 Lion. Your hardware limits you to OS X 10.7 Lion. Your iMac can't run or install OS X 10.8 Mountain Lion OR OS X 10.9 Mavericks.
http://store.apple.com/us/product/D6106Z/A/os-x-lion
My strong advice is that you keep your iMac model on OS X 10.6.8 Snow Leopard. OS X 10.7 Lion needs a full 4 GBs of RAM, for the OS alone. Your Mac barely meets this requirement and will leave no additonal RAM to efficiently run any additional application without severly slowing down your iMac.
Before embarking on a OS X system upgrade, it would be very prudent to back up all of your important, personal data, beforehand.
You can choose just to backup the most important data by either burning data to CDs/DVDs, or copying data to large capacity USB flash drives.
The two better methods is to purchase a good quality external hard drive and backup the data and OS using OS X's Time Machine app to back your data up to an externally connected hard drive.
The other method is to backup your entire system and data using data cloning apps such as Carbon Copy Cloner or Super Duper to clone an exact copy of your iMac's internal hard drive to the externally connected hard drive. Cloning data to an external drive will give that drive the ability to boot from in an emergency. Your Mac will be able to be booted and run off of an external drive.
The type of connection of an external hard drive is yours to choose. The two types of data transfer connections your Mac can use are USB 2.0 or FireWire 400/800.
If you want a hard drive that has a faster, continuous throughput of data and the possibilty of running your iMac from an external hard drive (in the event your Mac's internal hard drive fails or data becomes corrupt and your Mac system won't boot to the Mac's internal drive) opt for a FireWire drive. If none of this is important to you, then get a hard drive that uses a USB 2.0 connection, instead.
Good Luck!

After installing the update I get this message on an app from facebook "502 Bad Gateway nginx" what is the issue and what do I need to do to solve the issue?

after installing the update I get this message on an app from facebook "502 Bad Gateway
nginx" what is the issue and what do I need to do to solve the issue?

Hi there, harleygirl.
A look around the internet and my previous knowledge indicates this is not an issue with firefox, but with how the server that the app is run on is incorrectly configured. To test this, please install an old version of firefox. You can download an older version from http://www.mozilla.org/en-US/firefox/all-older.html then try to visit the website again. Please let us know if it turns out that it works with version 3.6

I have new printer Photosmart C410 and osx10.4.11. What do I need to do to make them work together?

I have new hp printer Photosmart C410a and Mac osx10.4.11. What do I need to do to make them work together?
My computer is:
Model Name:    iMac
Model Identifier:    iMac6,1
Processor Name:    Intel Core 2 Duo

Here is what you need to order:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
Hope you are backing up anyway, but be sure you have an up to date backup. Repair permissions in Disk Utility, then restart from the Snow Leopard disk you buy (in the above link) and do an upgrade (only changes the OS), not a clean install (which wipes all data). Others on here may chime in on their thoughts on how best to do this, but I've never had trouble over 20+ years doing it this way. If you aren't having crashes and strange problems now you should be fine. Please write back or start a new thread (you'll get more help than continuing in this thread which has printing problems in the header) that has something like "Need help upgrading from Tiger to Snow Leopard" that will attract more help.

My HP 3054 printer/scanner worked very well for my needs, but today I tried to scan something and I get this message:(com.apple.ImageCaptureCore error -9922.) What does this mean and what can I do to get my scanner to work again?

My HP 3054 printer/scanner worked very well for my needs, but today I tried to scan something and I get this message:(com.apple.ImageCaptureCore error -9922.) What does this mean and what can I do to get my scanner to work again?

i have this too on my hp photosmart b210
no one seems to know how to fix it!!

HT1688 I recently upgrade my Iphone but the old one is still active. I installed the friendjectory app on my new phone but it will not open but for a few seconds ab=nd then closes. What is wrong and what do I need to do to make this app work on my new pho

I recently upgraded my Iphone. Iinstalled the friendjectory app on the new phone but it will not open but for few seconds and then closed. What is wrong and what do I need to do? My old phone is still active and working. Do I need to do something about that?

Hi stanczak53,
Welcome to Apple Support Communities.
See this link for some tips on troubleshooting apps on your iPhone:
Using apps on your iPhone
http://www.apple.com/support/iphone/assistant/application/
Best,
Jeremy

I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

Hello deneye2112,
Thank you for providing the details of the burning issue you are experiencing. I found some resources that I think might help:
First, I recommend resetting the System Management Controller (SMC) on your Mac (I wasn't sure if you had a removable battery or a built in battery, so I listed the steps for both):
Resetting the SMC on Mac portables with a battery you can remove
Note: Learn about removing the battery on MacBook and MacBook Pro.
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your ownNote: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you are still having trouble with burning after that step, I recommend reviewing the section titled "Top troubleshooting tips" in the following article:
Disc Burning Quick Assist
http://support.apple.com/kb/HT1152
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

It can be done with analog but not digital thanks to "good 'ol" HDCP copy protection which apple (and most other manufacturers) unfortunately respect.
So you can take the analog output from your cable box (component -- 5 cables -- if it has it but generally they all have composite -- 3 cables) and feed it into some kind of converter or into some appropriate pci card for your mac pro. But none of them are going to let you directly use the HDMI output from the box to your computer.
Bottom line, no single cord is going to work and it will never be the higher quality digital picture you get on your tv.
Some qualification: There are boxes that I think support hdmi input. Look at Blackmagic. But I still don't think you can get around the HDCP from the cable box (might depend on the kind of cable box).

My boyfriend who has an iPhone 5 just had his phone stolen, he has an iCloud account with find my iPhone app downloaded but we do not have access to a computer only the safari on my iphone 4s, where do I need to go and what do I need to do to access his

My bitfriend who has an iPhone 5 just had his phone stolen, he has an iCloud account with find my iPhone app downloaded but we do not have access to a computer only the safari on my iphone 4s, where do I need to go and what do I need to do to access his

You need to download the free Find my iPhone application from the App Store.

I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had. I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

It has always been very basic to always maintain a backup copy of your computer.
Use your backup copy to put everything back.
If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad: File>Transfer Purchases

I need to burn a Final Cut pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn one just using Final Cut Pro? and can I go through IDVD?

I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!

I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again?

I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS. What do I need to do to make it work again? Just a patch/update or do I need to uninstall and install?

antoniobesteban wrote:
I just upgraded from Mountain Lion to Maverick (10.9.3) and Adobe CC is listed as incompatible with this OS.
Where are you seeing that information? Got a link?
According to the Adobe website: Mac OS X Mavericks (10.9) compatibility FAQs | CC, CS6, Acrobat
Plenty of people, including me, are currently running CC on Mavericks.

Can I copy and paste the oil paint filter from CC to CC 2014 in the corresponding folder? What else I need to do to make it works?

Can I copy and paste the oil paint filter from CC to CC 2014 in the corresponding folder? What else I need to do to make it works?

Sorry, but that's a no. Google Photoshop CC 2014 FAQ to find out why

Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day

How do I, and what do I need to burn a DVD that works in a regular DVD.....

Similar Messages

Maybe you are looking for