How do I apply a border to a layer??

#Layer1 { border:1px solid green; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"btdude" <[email protected]> wrote in
message
news:eccljn$ngb$[email protected]..
> How do I apply a border to a layer??

Similar Messages

How do I apply a filter to a layer without having a selection affect it?

I have 3 layers. I have been working on two, and have a a selection running so I can apply filters on those two. I now want to add a 3rd layer, and both move it and apply filters to it, but I want the entire new layer affected. However, the selection I previously made affects the new layer. If I move it, the selection moves, if I apply a filter, it applies only to the selection. This is not what I want, as I want to experiment with positioning and filtering this layer behind the selections. I will have other things to do with the selections as I continue, so I don't want to deselect and lose the selection. I'm thinking this should be simple, but I cannot find the right "magic words" to find the answer. How do I get a layer to be independent of a selection on other layers? The layers are not linked. Working with CS6.

Hi nitmd88,
You've asked a very good question. You can save selections and reuse them over and over again in Photoshop. The way to do that is to save them with the Channel panel. Here's how to do it:
Create a selection.
Choose Window > Channels to display the Channels panel. At the bottom of the Channels panel, click the Save Selection button. A new channel will be created. This is an exact replica of the selection you made.
Now that your selection is saved and can be reactivated at anytime, you can deselect (Select > Deselect) and work on other areas of your image. Anytime you need to activate that selection, simply choose Select > Load Selection and choose the Alpha channel you saved in step 2.
I hope this helps,
Luanne

Applying a border to a cropped image??? Help.

How do i apply a border to an image that's been cropped? It seems that everything I try will add the border to the original edges of the image, and then the border gets cropped out along with the edges of the video when I start cropping.

Magic-hat wrote:
So, this would mean that by using a color matte underneath, it's parameters would be independent of those of the image above it?
Yes
If I wanted to have the image move or re-size, I would have to then apply the changes to the border seperately as well?
Yes, although since you are cropping an image you could copy the clip you've cropped, then Control Click the matte clip, select Paste Attributes, and check the Crop box. This will size your matte to the exact crop of your clip. Then load the clip into the viewer and since it's a crop you can slightly modify the crop or you can simply move the matte clip a little down and to the right or left or whatever your taste desires. Now you have your clip and a border.
If I wanted to have the image move or re-size, I would have to then apply the changes to the border seperately as well? Or would I nest them into 1 clip then apply size changes?
At this point Nesting them would be faster.

Applying a border to a document

I am a very new Apple user. I have the Pages version just before the more recent Pages '08. How do I apply a border to a document?

The Mrs.,
Welcome to Apple discussions.
There's no simple border command, so it's going to take a few steps. You could do it this way:
Add a rectangular object to the page; make sure you turn off wrap (Wrap inspector > uncheck Object Causes Wrap. Stretch the object to fill the page.
Click on the Graphics inspector; select the kind of border you want -- either a line or picture frame. From the Fill menu, select Color Fill. Click on the color swatch. Select the little box of crayons on the top right. Then click on a white crayon. You should now be seeing just your border.
With your border still selected, click on Format > Advanced > Send Object to Section Master to make your border repeat on every page. If you don't want it to repeat, skip this step.
You might want to save your document as a template, so you don't have to go through this every time.
-Dennis

How do you apply a black and white image sequence as an alpha layer to another image sequence

I have a 3D render I'm compositing in AE CS3.
Everything is rendered as image sequences, and I have an alpha pass. How do I apply it to my master layer?

Nevermind. Todd Kopriva answered the question here:
http://forums.creativecow.net/readpost/202/877498

How can i apply border for fluid grid layout div

How can i apply border for fluid grid layout div

<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Untitled Document</title>
<link href="boilerplate.css" rel="stylesheet" type="text/css">
<link href="CSS/Layout.css" rel="stylesheet" type="text/css">
<link rel="stylesheet" href="flexslider.css" type="text/css">
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.6.2/jquery.min.js"></script>
<script src="jquery.flexslider.js"></script>

<script type="text/javascript" charset="utf-8">
$(window).load(function() {
    $('.flexslider').flexslider();
</script>


<script src="respond.min.js"></script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="LayoutDiv1"><img src="SJV-Images/Banners/Dark-green-curved-header.png"/></div>
<div id="LayoutDiv2">
<div class="flex-container">
<div class="flexslider">
    <ul class="slides">
      <li>
        <img src="SJV-Images/Stud1.jpg"/>
      </li>
      <li>
        <img src="SJV-Images/Stud2.jpg" />
      </li>
      <li>
        <img src="SJV-Images/Stud3.jpg" />
      </li>
    </ul>
</div>
</div> </div>
<div id="Nav">This is the content for Layout Div Tag "Nav"</div>
<div id="Special_Features"><h3 align="center">SPECIAL FEATURES</h3>
<ul>
<li>
It is one of the oldest school.</li>
<li>It was first started as an orphanage for the children of British soldiers, and later moved to its current location.</li>
   <li>Rich in Anglo-Indian tradition dating back to three centuries.</li>
<li>The campus now has separate buildings within the campus for year 1 to year 8 (Junior and Sub Junior block) and year 9 to year 12 (Senior and   Super Senior block).</li>
<li>The school has montessori facilities in a separate building.</li>
<li>The School also has boarding facilities for students from distant places.</li>
</ul></div>
<div id="History"><img src="SJV-Images/His_Image.png" alt="Hisimage" class="floatleft">
<h3>HISTORY OF OUR SCHOOL</h3><P>In 1750 – a very long time ago,a missionary and a teacher, Christian Frederick Schwartz came to India to work in the Danish Mission at Tranquebar.Due to his own personal charm, genius and integrity, soon he became a trusted envoy to the court of Princes ,both hostile and friendly. He even helped in the training and education of Serfogee Rajah, the adopted son of the Tanjore Raja Tuljagee.</P></div>
<div id="Photo_Gall"><center>
    <strong>PHOTO GALLERY</strong>
</center>
<p><img src="SJV-Images/Photogall.png" width="174" height="70" class="floatright"/></p>
</div>
<div id="News_Events"><center>
    <strong>NEWS & EVENTS</strong>
</center><center>Annual Day<br><center>
    Alumni Meet<br>
    Exam Time Table<br>Parents-Teacher's Meet</center>
</center>
<br></div>
<div id="footer">This is the content for Layout Div Tag "footer"</div>
</div>
</body>
</html>

How do I set the border preferences when formatting cells in Numbers? After I make my selections and close the drop down menu, nothing happens.

How do I set border preferences when formatting cells in Numbers? When I use the drop down menu under Inspector, and set the preferences I want, a blue line shows up in the appropriate cell or cells to which I want to apply a border. When I close the menu, the blue line goes away and there is no border.

Jerry,
I'm sorry for the intrusion on this thread. I had only made a simple comment, and then others responded. It was not my intention, especially since the original question was marked as answered. I will direct responses to any comments I make in fture postings that deviate from the OP's question to a newly created topic if I need a response, if not, I will just add a statement at the end of my comments to please not respond.
As to your diagram, it is the ability to select the non-contiguous cells, and then be able to simulataneously select a specific part of the border edge, and then be able to change them all at once that I was after. That is something that is not possible in Numbers. It seems that in your diagram the "before", was attained by selecting each cell one at a time, and changing its border edge, one at a time. Then, in the "after", selecting the non-contiguous cells and changing the "Stroke" settings for the lines was attained simultaneously since that is possible in Numbers.
If I am correct in how you attained the results in your diagram, that wasn't really what I was trying to achieve, since if the option were not grayed out, it would only select the same border edge on all selected cells. If I am incorrect, then I would like to have your input.
Once again, sorry for allowing my comment to develop as it did.
In God's Harmony

How can i apply adobe bridge in my ipad 2?

how can i apply adobe bridge in my ipad 2?

As when installing an app on a computer, there must be a version for the app that is compatible with the computer and the OS running the computer.
Is there an Adobe Bridge app for the iPad available via the iTunes app store?

How do I apply programmatic skins for completely custom drawn components of a Flex library project?

Hello folks,
I am looking for best practices advice when (1) creating
custom components and (2) styling and skinning.
I already know how to skin a component part of the Flex
framework. I can make a class extending ProgrammaticSkin and have
my component skinned using CSS to link the component with the
reference to my custom class.
However what about those cases when you are completely
creating a component from scratch?
Imagine a "Freehand Drawing Canvas" component that allows the
user to draw on it and has some buttons to set color styles, line
styles, etc., or imagine a "Screen Flow Gallery" component that
displays visual objects in a fashion similar to Cover Flow in the
Mac.
In many components I am aware you may reuse other components
part of the Flex framework but I am trying to picture an scenario
where you would need to draw everything yourself because there just
isn't something to base it upon so you will end up drawing it from
scratch.
To learn how instead of building one of those components I
mentioned previously I decided to start with something simple that
would illustrate this like a LiteButton component that will behave
just like the Flex mx.controls.Button but will extend UIComponent
and be completely custom drawn.
The component will have a default look and will also be
style-able and skin-able. I will provide styles for users of the
component to modify and regarding skinning anyone can create a
custom ProgrammaticSkin adding its own drawing logic and link it to
the component via CSS with the ClassReference applied to the skin
selector.
So far so good and it's clear what I want to achieve. I
actually know how to do most of the stuff here but I have one
single problem.
Here is my question, where should I put my custom drawing
logic? If I do it in the updateDisplayList inside the class
extending UIComponent it works, however I thought that it would be
a better practice to do it using programmatic skins, that way I
could provide different skin themes for my component set.
The problem is that I can't make the programmatic work in
this scenario. I tried instantiating the custom programmatic skin
during the updateDisplayList of the LiteButton component and adding
it to my display object via addChild but that didn't do anything. I
also tried creating a "default.css" stylesheet and tried to use
ClassReference as I would normally do to skin an already existing
component (or composite component as well) but that didn't do
anything either.
So how do I apply programmatic skins for completely custom
drawn components of my Flex library project?
I could do it inside the updateDisplayList of the LiteButton
class extending UIComponent but again I would like to provide
different theme sets for my components so it makes sense using
programmatic skins.

"jbucaran" <[email protected]> wrote in
message
news:[email protected]...
> Hello folks,
>
> I am looking for best practices advice when (1) creating
custom components
> and
> (2) styling and skinning.
>
> I already know how to skin a component part of the Flex
framework. I can
> make
> a class extending ProgrammaticSkin and have my component
skinned using CSS
> to
> link the component with the reference to my custom
class.
>
> However what about those cases when you are completely
creating a
> component
> from scratch?
>
> Imagine a "Freehand Drawing Canvas" component that
allows the user to draw
> on
> it and has some buttons to set color styles, line
styles, etc., or imagine
> a
> "Screen Flow Gallery" component that displays visual
objects in a fashion
> similar to Cover Flow in the Mac.
>
> In many components I am aware you may reuse other
components part of the
> Flex
> framework but I am trying to picture an scenario where
you would need to
> draw
> everything yourself because there just isn't something
to base it upon so
> you
> will end up drawing it from scratch.
This may help with that
http://livedocs.adobe.com/flex/3/html/help.html?content=skinstyle_3.html
> To learn how instead of building one of those components
I mentioned
> previously I decided to start with something simple that
would illustrate
> this
> like a LiteButton component that will behave just like
the Flex
> mx.controls.Button but will extend UIComponent and be
completely custom
> drawn.
>
> The component will have a default look and will also be
style-able and
> skin-able. I will provide styles for users of the
component to modify and
> regarding skinning anyone can create a custom
ProgrammaticSkin adding its
> own
> drawing logic and link it to the component via CSS with
the ClassReference
> applied to the skin selector.
>
> So far so good and it's clear what I want to achieve.
Actually after
> playing
> with the weekend and today I know how to do most of the
stuff but I have
> one
> single problem. So here is my question, where should I
provide my custom
> drawing logic? If I do it in the updateDisplayList
inside the class
> extending
> UIComponent it works, however I thought that it would be
a better practice
> to
> do it using programmatic skins, that way I could provide
different skin
> themes
> for my component set.
These aren't mutually exclusive. When you provide a skin with
a
TypeSelector, you have to add it to the display list
somewhere, and this is
typically done in updateDisplayList or addChildren. I prefer
to do it in
updateDisplayList, because you can then change it if the
style changes.
> The problem is that I can't make the programmatic work
in this scenario. I
> tried instantiating the custom programmatic skin during
the
> updateDisplayList
> of the LiteButton component and adding it to my display
object via
> addChild but
> that didn't do anything.
Exactly what did you do?
> I also tried creating a "default.css" stylesheet and
> tried to use ClassReference as I would normally do to
skin an already
> existing
> component (or composite component as well) but that
didn't do anything
> either.
I've never had any problem using an approach similar to
this...but I will
say that I couldn't see any advantage in creating a
default.css style sheet,
since it's not really default in the way that the one that
comes with Flex
is. It's much more obvious to anyone using your component
what's going on
there if you create a style sheet where they're likely to
spot it.
> So how do I apply programmatic skins with the default
look for custom
> drawn
> components?
It seems like your approach is fine, but maybe you've made a
mistake in your
implementation.
> I could do it inside the updateDisplayList of the
LiteButton class
> extending
> UIComponent but again I would like to provide different
theme sets for my
> components so it makes sense using programmatic skins.
You might want to consider also adding an instance of
HaloBorder to your
component. That brings a lot of functionality with it.
HTH;
Amy

How do you apply the same password policy to every PDF document you create with inDesign?

All,
Adobe peeps!,
I don't know if this is really supported with inDesign 5.5, but here is my my use case:
I constantly create more than 10 PDFs a day using inDesign
On all PDF's I create, i want to apply password security to protect them
But in order to do so, within inDesign, I am always forced to go to the "security dialogue" pane to set up the same permission and passwords over and over again
This gets tiring :/
So what I am hoping to do is the following:
Like acrobat, I want to create a password policy within inDesign
I want all PDFs created to have such a password policy be automatically applied
I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
So my questions are:
Is it possible to create password security policies in inDesign?
Is it possible to apply the same password security policy to every PDF i create in inDesign?
If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
If all fails, do you guys know of any extensions that can support this?
Any help would be great. Thanks!

Steve,
Thanks for your notes. To follow up on your response.
Bummer. I kinda had a hunch at this inDesign limitation.
I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
PS. I am using acrobat pro x.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

How do I apply same adjustments to multiple photos at the same time?

How do I apply same adjustments to multiple photos at the same time?

You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
2 - Control-clicking on the next photo and selecting Paste Adjustments.
OT

How can I apply my CS Photoshop membership to a second computer?

how can I apply my CS Photoshop membership to a second computer?

Thank You!
I felt like I was wandering through mazes to get that question to the right
venue.
Thanks again,
Gayatri

How do I apply a fade to the end of an audio track?

I'm using Captivate 7, and have added one of the Gallery sounds to a slide in my software simulation. I want the track to fade at the end of slide, so I guess I need to apply an effect. All the help refers to "clicking the triangle next to the audio track name" to expand the track for editing, then goes on to talk about keyframes. I don't see a triangle next to the track name, or next to anything related to the track. I am in the Effects workspace. Also, on the EFFECTS tab, all the selections are grayed out.
I also tried adding a fade by using the settings on the PROPERTIES tab, but it doesn't affect the playback.
How do I apply a fade effect?

Effects have no relation whatsoever with audio clips, I don't understand why you were looking there.
You can edit audio, and to get into the editor there are several ways. If this is slide audio, the clip is visible on the timeline and right-click menu has an option Edit. Another way is to find the clip in the Library, and the right-click menu on its name has more options, not only Edit in Captivate, but you can also use another application which I would recommend. The audio editor in Captivate is pretty limited, I'm using Audition, but Audacity is free to use.
For an easy way to have a fade out (you can time it, not the way of fading like in a real audio editor), you don't even need the audio editor in Captivate. Look in the Properties panel, part Audio and you'll have Fade in and Fade out.

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

How do I apply a border to a layer??

Similar Messages

Maybe you are looking for