How do I apply a filter or Rubber Stamp to an entire video clip in Photoshop CS6?

I see if I apply and adjustment layer, it works for the whole clip but any filter outside of that or rubber stamp only lasts for a few frames. How do I apply them to the entire clip?

Seems like converting the layer to a Smart Object sort of works but once I do I can't play the footage
<iframe title='AdobeTV video player' width='442' height='256' src='http://tv.adobe.com/embed/708/9366/' frameborder='0' allowfullscreen scrolling='no'></iframe>

Similar Messages

How does one apply adjustments such as Rubber Stamp and Sharpening to Video in Photoshop CS6?

I'm trying to apply a rubber stamp to my entire clip but it will only last one frame.
Same if I sharpen.
I though I was supposed to convert the layer to a Smart Object but once I do that I can no longer use the Rubber Stamp.
And if I Rasterize the layer, the video will no longer play at all and remain stuck on one frame.
I'm sure there is something simple I'm missing here. I see in After Effects, they are all Keyframeable but can't figure this out in PS.

Seems like converting the layer to a Smart Object sort of works but once I do I can't play the footage
<iframe title='AdobeTV video player' width='442' height='256' src='http://tv.adobe.com/embed/708/9366/' frameborder='0' allowfullscreen scrolling='no'></iframe>

How do I apply a filter to an entire video clip?

I'm trying to find out how to apply a filter, e.g. Oil Painting, to an entire video clip and not just one frame.
Been trying to work with keyframes but it wont happen - all I get when applying a filter from the Filter Gallery
is a filter applied to just one frame (not even a second of the video clip i.e.).
So, the question is: is it even possible to apply a filter from the gallery to an antire video clip? If so, how?
Thank you very much!

Tried it, works like a charm!
Thank you!

How do I apply a filter to a video clip? (Without having to do it individually to each frame)

How do I apply a filter to a video clip? (Without having to do it individually to each frame)

put levels on which you want to apply the filter, you will see them in the time line as a group ten apply filter, you can also adgust them all in time line...
sam

How do I change effects in 'Altered Video' timeline in Photoshop CS6?

I added a filter to my video but it only lasts for a few frames. There are little marks shown where I added it in the Altered Video section of the timeline.
How do I apply a filter or effect to the entire clip?
Also when I ad a filter such as Lens Correction, it only lasts for a few frames..How do I get it to remain?

I was going to Move that thread for you, but could not get it to go to Photoshop General Discussion - that option was grayed out.
Maybe Pierre, who Replied in that thread, will have more access, and can accommodate you.
Good luck,
Hunt

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

How to change a photo from 32 bit mode to 16/8 bit mod in Photoshop cs6?

How to change a photo from 32 bit mode to 16/8 bit mod in Photoshop cs6?
I tried to go to Image- Mod but i cant press on Mod button..
I saw to late that i cant save the image i created with 32bit mode.
Please help..

In the image menu, goto the mode sub menu, then choose 8 or 16 bit.

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

How can I eliminate the mesh screen which appears over any image I open in photoshop CS6?

It depends, but it could either be the Grid or Pixel Grid under View>Show.

I just recently upgraded to iMovie 10.0.1. Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes. How can I get my entire video clip at once without a break again?

I just recently upgraded to iMovie 10.0.1. Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes. How can I get my entire video clip without a break again?

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

How do I apply a filter to a layer without having a selection affect it?

I have 3 layers. I have been working on two, and have a a selection running so I can apply filters on those two. I now want to add a 3rd layer, and both move it and apply filters to it, but I want the entire new layer affected. However, the selection I previously made affects the new layer. If I move it, the selection moves, if I apply a filter, it applies only to the selection. This is not what I want, as I want to experiment with positioning and filtering this layer behind the selections. I will have other things to do with the selections as I continue, so I don't want to deselect and lose the selection. I'm thinking this should be simple, but I cannot find the right "magic words" to find the answer. How do I get a layer to be independent of a selection on other layers? The layers are not linked. Working with CS6.

Hi nitmd88,
You've asked a very good question. You can save selections and reuse them over and over again in Photoshop. The way to do that is to save them with the Channel panel. Here's how to do it:
Create a selection.
Choose Window > Channels to display the Channels panel. At the bottom of the Channels panel, click the Save Selection button. A new channel will be created. This is an exact replica of the selection you made.
Now that your selection is saved and can be reactivated at anytime, you can deselect (Select > Deselect) and work on other areas of your image. Anytime you need to activate that selection, simply choose Select > Load Selection and choose the Alpha channel you saved in step 2.
I hope this helps,
Luanne

How do I apply the Letterbox effect to the whole of my video?

... without exporting it? I would also like to put some colouring fx to the final product as well... is it possible without an export then importing it back in?

If you want a different aspect ratio than 16:9 in a 16:9 project, or 4:3 in a 4:3 project, you could select your whole timeline and turn it into a compound clip and add the Widescreen effect to the compound clip. You can also use the Color Board to modify the colours throughout the video at the same time.
I've made a widescreen title generator effect with many more aspect ratios that is a free download from my blog.
You attach it to a clip in your timeline, and change the start and end point to match the duration of your project. It adds the widescreen matte to every storyline below it in the timeline.
Alex4D

How do I apply a 2 frame audio mix across an entire sequence quickly

As an Avid and FCP editor I sometime come across things which one can do seemingly easier than an other. One of these is the ability to add an audio mix to a selected range of cuts on the timeline. Is there a simple way to do this on FCP 5.
Many thanks
Keith

Hey Keith
I miss that too!
You can nearly do it.
If you drag a segment from the timeline on to the canvas windo, the edit overlay appears and you can choose Overwrite with Transition which will cut the segment back in with a mix at either end.
It works with multiple segments
It doesn't like gaps in the track (you could fill them)
It doesn't work across multiple tracks
You have to line up the source button things so it cuts th segment / run of segments on to the right track.
You can't control the duration of the transition but you might be able to change the default to transition somehow.
Are you finishing the audio or is it guide for a dub?
Do you really need the mixes? A dubbing mixer laughed at me the other day for religiously putting in 2f mixes, took them out and I'm damned if I could here the difference (except where there's a bad click)
All the best
Jim

How can I create a pop up window for a Windows Media video file in Dreamweaver CS6?

I have a Windows Media video file on my homepage that plays automatically when you go to the website. I'd like to change my homepage. I now would like to place text that says "click here to play the video" and I'd like a pop up window to open and play the video. I'm using Dreamweaver CS6. Your help will be appreciated. Thanks.

BlueSapphire777 wrote:

Is the code you told me about (above), is it necessary for older browsers such as ie8? I thought you were saying it was for the HTML5 tags and I wasn't sure I'd bother with it. If it helps people with ie8, I probably should add it.
I include it (or a link to a localized copy of the file) by default now.
To truly support the ancient browsers out there, you'd likely need something like...
<video width="500" height="500">
    <source src="video.mp4" type="video/mp4" />
    <source src="video.ogv" type="video/ogg" />
    <source src="video.webm" type="video/webm" />
    <object width="500" height="500">
    <param name="movie" value="video.swf" />
    <embed src="video.swf" width="500" height="500"></embed>
    </object>
</video>
I don't bother with a Flash fall back for old browsers though. I just put in text letting the viewer know they're behind the times pretty severely, like...
<video width="500" height="500">
    <source src="video.mp4" type="video/mp4" />
    <source src="video.ogv" type="video/ogg" />
    <source src="video.webm" type="video/webm" />
    <p>Your browser is horribly, helplessly and hilariously outdated. Visit <a href="firefox.com" target="_blank">www.firefox.com</a> to download something better, more secure, modern, worthwhile, etc, etc...</p>
</video>
For junky old browsers that can't see any HTML5 (which the <video> and <audio> tags are), they get a text message to get something better and a link to go there.

How do I create a split screen on a motion clip in Photoshop CS6?

I have a project due soon and the last requirement is to "create a split screen on a motion clip". Any ideas? Thanks!

In the time line panel you will either need to split the video by moving the playhead to the location then click the split button. Or you can add another video if you want two different video's playing.
Because one video is on top of the other you need to scale both videos so they fit the screen. Select one video the press ctrl-t on windows or cmd-t on mac to enter transforms mode. Click and drag the corner to scale the video. Then repeat for the other video. You will also have to move the video's into place.
When satisfied click enter or return on keyboard.
Ex. For standard video the document should be (in the USA) 640x480 pixels. (I believe Adobe states it should be 720x480 for video, but this is only an example)
So, to place two video's side by side each video would have to be divided by 2 for the width. 320x480
When you move the video's they should snap into place.
For two video's that stack, the height would be divided by two - 640x240

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those clips in Organizer. I can do that in Premiere Elements 12 and save them as "Projects" - but how do I get the divided clips back into Organizer?

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those single clips into 2 or 3 separate clips, each shown separately in Organizer. I can divide the clips in Premiere Elements Editor 12 and save them as "Projects" - but I can't find any way to get those divided clips back into Organizer. Does anyone know whether that can be done? Many thanks for your thoughts.

What about Google Drive? And just share the folder with the family members.
Erick

How do I apply a filter or Rubber Stamp to an entire video clip in Photoshop CS6?

Similar Messages

Maybe you are looking for