How do I apply a filter to an entire video clip?

I'm trying to find out how to apply a filter, e.g. Oil Painting, to an entire video clip and not just one frame.
Been trying to work with keyframes but it wont happen - all I get when applying a filter from the Filter Gallery
is a filter applied to just one frame (not even a second of the video clip i.e.).
So, the question is: is it even possible to apply a filter from the gallery to an antire video clip? If so, how?
Thank you very much!

Tried it, works like a charm!
Thank you!

Similar Messages

How do I apply a filter to a video clip? (Without having to do it individually to each frame)

How do I apply a filter to a video clip? (Without having to do it individually to each frame)

put levels on which you want to apply the filter, you will see them in the time line as a group ten apply filter, you can also adgust them all in time line...
sam

How do I apply AUTO COLOR to an entire 2-hour .mov video?

How do I apply AUTO COLOR to an entire 2-hour .mov video, please?

Hi,
Image > Auto Color results can be achieved by setting the Auto options of Curves.
1. Open .mov file in Photoshop CS6
2. Click on the Curves icon in the Adjustments panel.
3. Opt/Alt click on [Auto] button.
4. Set Algorithms radio button to "Find Dark & Light Colors", then click [OK].
- (My notes indicate that "Snap Neutral Midtones" should be ON also, but I'm not seeing that to be true.)
Result: The Curves adjustment layer that uses the same algorithms as Auto Color is applied to the entire clip.
The Auto Image adjustments can be accessed via the Curves' Auto options:
Image > Auto Levels = Enhance Per Channel Contrast algorithm
Image > Auto Contrast = Enhance Monochromatic Contrast algorithm
Image > Auto Color = Find Dark & Light Colors + Snap Neutral Midtones ON
Hope that helps!
Meredith

In Imovie '11, how can I drag more than one set of video clips to my project?

In Imovie '11, how can I drag more than one set of video clips into my project. I know how to highlight in yellow and drag the set, but can I drag a group of sets? Thanks

To select multiple clips, hold down the command key as you click multiple clips. Then you can drag them all at once.
To drag all clips at once, select one, then Edit/Select All. Then drag them all.

My ipad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

My iPad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

It is most likely a size issue. I have a 3 minute video that's almost 200 megs. If you're just trying to show it, you might consider youtube. if you're wanting to upload/share it then you can try things like Dropbox or other onlilne file sharing programs.

How can I export a still picture from a video clip?

How can I export a still picture from a video clip?

I'm able to export stills from iMovie without anything extra. I create a new project - call it Exports say. Now, in your event clip with the frames you want as stills, select a single frame and drag it into your project. Repeat for other stills you want to export. Then choose Share -> Export Using QuickTime.
In the pop-up, choose Movie to Image Sequence. Click Options and choose the image format you want. Playing with the number of stills lets you pick how many stills you want from each second of video. Hit OK and the stills will be generated in the directory you choose.
I've only done this with HD video. Don't know how well it works with lower res, interlaced vid.
HTH,
Tom

I just recently upgraded to iMovie 10.0.1. Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes. How can I get my entire video clip at once without a break again?

I just recently upgraded to iMovie 10.0.1. Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes. How can I get my entire video clip without a break again?

As long as you know your serial number you can download PSE from here:
Download Photoshop Elements products | 11, 10
If you don't know your serial number:
Find your serial number quickly

How do I apply a filter to a layer without having a selection affect it?

I have 3 layers. I have been working on two, and have a a selection running so I can apply filters on those two. I now want to add a 3rd layer, and both move it and apply filters to it, but I want the entire new layer affected. However, the selection I previously made affects the new layer. If I move it, the selection moves, if I apply a filter, it applies only to the selection. This is not what I want, as I want to experiment with positioning and filtering this layer behind the selections. I will have other things to do with the selections as I continue, so I don't want to deselect and lose the selection. I'm thinking this should be simple, but I cannot find the right "magic words" to find the answer. How do I get a layer to be independent of a selection on other layers? The layers are not linked. Working with CS6.

Hi nitmd88,
You've asked a very good question. You can save selections and reuse them over and over again in Photoshop. The way to do that is to save them with the Channel panel. Here's how to do it:
Create a selection.
Choose Window > Channels to display the Channels panel. At the bottom of the Channels panel, click the Save Selection button. A new channel will be created. This is an exact replica of the selection you made.
Now that your selection is saved and can be reactivated at anytime, you can deselect (Select > Deselect) and work on other areas of your image. Anytime you need to activate that selection, simply choose Select > Load Selection and choose the Alpha channel you saved in step 2.
I hope this helps,
Luanne

How do I apply a filter or Rubber Stamp to an entire video clip in Photoshop CS6?

I see if I apply and adjustment layer, it works for the whole clip but any filter outside of that or rubber stamp only lasts for a few frames. How do I apply them to the entire clip?

Seems like converting the layer to a Smart Object sort of works but once I do I can't play the footage
<iframe title='AdobeTV video player' width='442' height='256' src='http://tv.adobe.com/embed/708/9366/' frameborder='0' allowfullscreen scrolling='no'></iframe>

How do I apply a transition to a group of clips?

Hi,
I want to apply a transition to a group of clips. I know how to select a group of clips, but I have not found how to apply the same transition on all of them. Can this be done in FCE?

let:s say I want to apply the default transition to the group, how do I do it?
Place the playhead at the start point in the Timeline.
Select a group of clips that are contiguous.
Drag them to the Canvas Overlay, Overwrite with Transition.
Note: Media Handles must be available or you will get a warning message.
And do I understand wright that I could also do it with a unique transition that I would place it in my >Favorites Bin? How would I do that?
A Favorite works differently. There's no way to alter the Default transition in FCE. The Default is always a one second dissolve.
To make a Favorite you can open an existing transition in the Timeline by double clicking it or just open a transition into the Viewer directly from the Browser. Existing is best as you can setup to see any changes in the Canvas.
It opens in the Viewer with the controls showing.
Placing the Playhead over the transition in the Timeline will give you immediate feedback of the changes in the Canvas.
Make any adjustments like timing, angle, color etc.
Look for a small hand icon at the top right of the Viewer.
Click and drag this to the Favorites Bin.
You will now see the new transition available for use with any new values.
This Favorite can now be used as a transition in the usual way.
There is no way to add the Favorite to more than one clip at a time.
Al

Applying color corrections to the original video clips?

How do I apply the same colour corrections I have made to video clips in PremierPro CS5.5, to the original video clips? Is there a way to save the clips from PremierPro to apply the same changes to the original avchd clips?

You would have to export with the correction applied.
These become "Intermediates"

How can I highlight a particular person in a video clip?

I'm working on a project in iMovie that involves video clips of baseball games. There's a particular player that I'd like to highlight somehow; like place an arrow to point him out, or place a circle around him, etc. Does anyone know of a way to do this? I couldn't find anything in the tutorials or iMovie help. Thanks!

Karsten Schlüter, a frequent contributor here, has posted a method for doing this on his site.
http://sites.google.com/site/karstenschluter/imovie09tricks/how-to-add-a-pointer

How to add a rectangle color frame for the video clips ?

Hi there,
I have shrink the 3 video clips small enough to fit all 3 of them into 1 screen.
And now I want tomake a border rectangle color frame for these 3 video clips.
Any tips on how I shall start ?
Thanks & regards
Cheers

Ian R. Brown wrote:
I have a feeling it can't be done because the border will probably go round the original full size video.
A workaround would be to use the Custom generator to make a rectangle which you resize and put above the background.
Then put your video you want framed on top of the lot and resize it so that a bit of the coloured Custom generator is showing all the way round.
It's gonna be fiddly but simple enough in theory!
Thanks Ian, that was a good idea.
But my cropped video clip is a video clip being color-keyed (ie my video clip has alpha channel & the background is transparent). So putting a colour image behind the clip does not work because it will be seen through the alpha channel.
Any tips ?
Thanks

How can I make the wireframe identical for various video clips?

Hello,
For the end credits on a small movie, I would like the video clips to be much smaller, and the background to be black. I know how to make the clips smaller on the screen, and this is done by adjusting the wireframe.
I am trying to have the wireframe remain in its identical size and location across various clips but cannot figure how to do this other than change the wireframe independently for each single video clip, making it an approximate job.
Is there a way to ensure that the properties of the wireframe (size, position) remain constant for a series of clips? I have tried to find some properties settings for the wireframe which I could replicate for all clips but this search has proved unsuccessful.
Many thanks in advance for any help.

Use the Paste Attributes command as detailed in this link:
http://discussions.apple.com/thread.jspa?threadID=1987781&tstart=15
Instead of checking the Filters box, check the Basic Motion box.

How can I take a still from an iPhoto video clip?

My ipad camera got stuck on the video button so every picture has come out as a video clip. Can anyone tell me how to extract still photos from a video? I don't know which version of iphoto is on my ipad.

The iPhoto for iOS forum is here
https://discussions.apple.com/community/app_store/iphoto_for_ios
Regards
TD

How do I apply a filter to an entire video clip?

Similar Messages

Maybe you are looking for