How do I apply a transfer mode to a SPECIFIC layer without a mask?

Hello
This is fairly easy (I think), but I just never learned to do it.
Let's say I have a stack of layers in a document. I want to apply a layer with a transfer mode but only apply it to ONE of those layers. I've seen this in files which I have received from others, but I have never done it myself (always faked it). When it's done right, the transfer mode layers look like they are nested inside of a layer.
Am I making sense at all?
thanks,
---------------S

Option-click between layers.

Similar Messages

Can't find how to shut off File Transfer Mode with...

I've spent the better part of two hours searching the Internet for information on how to turn off File Transfer Mode since my phone started refusing to connect to my home computer, today.
The pdf user's guide doesn't say how to find it. I've been digging through the menu on the phone trying to find anything that resembles File Transfer Mode so I can click it off.
The other FAQ and discussion groups I've located are irrelavent as the information they contain doesn't transfer to my Nokia 820 (they suggest options which don't exist on my phone).
Please, where does one start looking for File Transfer Mode on this phone so they can shut it off, and why isn't that information printed in the troubleshooting documents and self help files for these phones?
I connect through the USB cable to my PC. I have downloaded and installed Nokia PC Suite v.7.1.180.94 this morning in hopes that it would fix the connectivity problem, but unless I can get File Transfer Mode shut off somehow, my new phone's going to wind up being useless.
Nokia Lumia 820, Windows 8 phone
HP Pavilion Slimline s52021, Windows 7 Home

have you searched these forums and tried a soft reset (pressing the volume down and power buttons together until the phone vibrates)? Bear in mind that no, Nokia Suite, or Nokia PC Suite do not work with Windows Phone 8 devices at all, only the Windows Phone app does.
See if other devices connect to your PC, and try other USB ports.

How do I apply a filter to a video clip? (Without having to do it individually to each frame)

How do I apply a filter to a video clip? (Without having to do it individually to each frame)

put levels on which you want to apply the filter, you will see them in the time line as a group ten apply filter, you can also adgust them all in time line...
sam

How to set the file transfer mode to binary

Hi,
I have a requirement to upload files from local machine to server, and it is working fine.
But after uploading files junk characters are entered after each line, so want to set the file transfer mode to binary to get rid from this error.
We have checked that if we ftp the files manually then also getting the same problem when the transfer mode is not selected as binary.
Please give your valuable advice.
Thanks,
Ranita

Hi,
I want to set the file transfer mode through controller code, presently I am using the below code where no file transfer mode is specified ::
public void upLoadFile(OAPageContext pageContext,OAWebBean webBean)
String serverPath = null;
OAApplicationModuleImpl am = (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
   try {
      Connection conn = am.getOADBTransaction().getJdbcConnection();
      String query = "select distinct variable_name, value from fnd_env_context where variable_name = 'XXCUST_TOP' and concurrent_process_id = ( select max(concurrent_process_id) from fnd_env_context )";
      PreparedStatement stmt = conn.prepareStatement(query);
       for (ResultSet resultset = stmt.executeQuery();
                      resultset.next(); )
             serverPath = resultset.getString("value");
        stmt.close();
       catch(Exception ex)
         throw new OAException(ex.getMessage(), OAException.ERROR);
   String filePath = serverPath+"/"+pageContext.getParameter("FileType");
   //System.out.println("Default File Path---->"+filePath);
   String fileUrl = null;
   try
    DataObject fileUploadData = pageContext.getNamedDataObject("MessageFileUpload");
//FileUploading is my MessageFileUpload Bean Id
    if(fileUploadData!=null)
     String uFileName = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_NAME");
     String contentType = (String) fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
     //System.out.println("User File Name---->"+uFileName);
     FileOutputStream output = null;
     InputStream input = null;
     BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, uFileName);
     //System.out.println("uploadedByteStream---->"+uploadedByteStream);
     File file = new File(filePath, uFileName);   //C:\\Ranita
     //System.out.println("File output---->"+file);
     output = new FileOutputStream(file);
     //System.out.println("input---->"+input);
     byte abyte0[] = new byte[0x19000];
     int i;
     while((i = input.read(abyte0)) > 0)
     output.write(abyte0, 0, i);
     output.close();
     input.close();
     HashMap map = new HashMap();
     map.put("fromPage","Y");
     pageContext.forwardImmediatelyToCurrentPage(map,true,OAWebBeanConstants.ADD_BREAD_CRUMB_YES);
   catch(Exception ex)

How do i apply a widescreen matt to a rotated clip without the matt rotating too?

Hi,
I'm new to this.... but i have a problem...
Basically some of my footage isn't straight and i rotate it a little but obviously i have the black in the gaps where the image has moved.... but to combat that i want to apply a widescreen matte (which is being applied to the rest of the film anyway)..
BUT when i apply to matte it rotates to the image.... is there anyway to stop this?
Thanks

apply a matte to the layer above.
You can create one in Photoshop,
or download my Letterboxer Plugin (free, and I guess will not work in FCP X. :-(
Or use the one Andy Mees has built. ( http://web.me.com/andymees/Free_and_Easy/main/Entries/2008/1/23_Andy%E2%80%99s_L etterbox_2.html )
Rienk

How to place a background image, so that the text layer, without having to use a text box

Hello,
I have a problem with the placement of the background image. When I normally formatted text on a page and add the image you want on the background of the text and the handle on the back is still image over text, just no longer responds to wrap text.
The second problem is adding a new page to the document. I have unfinished document and I need to add a page before the current ... how?
This is a new Pages.
Thanks for the advice

Helps to know exactly what version of Pages you are using.
I assume Pages 5.1. But the last post makes me wonder.
Text Wrap only works on text under an object. Either it is in front causing text wrap or it is in the background with none. It is unclear what you are trying to achieve.
Click at the very beginning of your text:
Insert > Section Break/Page Break
Peter

How do I switch my phone to transfer mode when USB is connected to my computer?

How do I switch my phone to transfer mode when USB is connected to my computer?

you should get a notification at the top of the screen for a usb connection. pull it down & select mass storage.
in my computer or windows explorer, you'll see motorola as the next available drive after the hard drive, cd, dvd, etc.
click to open & the sd card can be viewed.

How to set DMA/PIO/IRQ transfer mode?

Greetings,
For my thesis I need to compare the actual impact on data acquire using different transfer modes in CVI (DMA, PIO, IRQ).
Documentation says that I have to use the DAQmxSetAIDataXferMech( TaskHandle taskHandle, const char channel[ ], int32 mode) function, but function like this simply does not exist in my CVI (using CVI 2010, version 10.0.1 (419).
How am I supposed to switch between modes?
Thanks for the reply in advance!
Yours,
Adrian
Solved!
Go to Solution.

Hi Adrian,
You can find this property using DAQmxSetChanAttribute.
Please find attached the two printscreens that will guide you to find the property.
Frome the attributes list choose Analog Input -> General Properties -> Advanced -> Data Transfer and Memory -> Data Transfer Mechanism
If you have any questions, feel free to ask here.
Don't forget to mark the solutions.
Kind regards,
Ion R.
Attachments:
Printscreen 1.JPG ‏100 KB
Printscreen 2.JPG ‏79 KB

How do I get firewire to work with after restarting from transfer mode

Every time I use transfer mode to move files to and from Mac Pro using transfer (target) mode, the firewire will not connect to any device after restarting to normal operation. The hardware profile indicates no connection. It starts working again several hours after Shuting down for an hour or so

If you have an idea for a new Print App that you would like to see, please submit your suggestion at the below link:
https://h30495.www3.hp.com/idea/submit
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Quitting Data Transfer mode - how?

Hi,
Is it possible to quit Data Transfer mode in N95. Any USB connection offers this mode, but doesn't show a way of quitting it.

have you tried to remove the usb cable?
Greece Nokia X6 RM-559 v40.0.002

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

How do I apply same adjustments to multiple photos at the same time?

How do I apply same adjustments to multiple photos at the same time?

You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
2 - Control-clicking on the next photo and selecting Paste Adjustments.
OT

How can I apply color to black and make it accurate?

Hello,
I have an illustration that is black, white, and shades of gray. I want to apply a color to the black, and have all the grays become tints of that color. I have tried different blending modes and I have tried monotones, but I don't think either of these techniques are working. When I go back to check the color, it's a different color, and it prints looking different than the color I had selected.
Do you know how I can make this happen?

May I suggest: Layer - New Adjustment Layer - Black & White, then use the Tint facility.
Personally, I often find it more handy (and providing more control) to use a Curves adjustment layer above all the others. Grab the curves of individual color channels and pull them this way and that to alter the color of what's underneath. It's not hard to keep whites white, blacks black, and give the stuff in between believable coloration.
-Noel

Payment engine mode Bank transfer mode want to enable

Hi Experts,
One of my client when our they are going make on payment through account "Bank Transfer Mode "mode is not enable.
How to make enable mode for this process .
please help me this issue
Thaking you
Dineshkumar kannan

Hi Dinesh,
Through Payment Method you can only Process Check Payments Means and Bank Transfer Payment Means for Outgoing Payment and Bank Transfer Payment Means for Incoming Payments are available.
Please check below link for Payment Wizard and Payment Method.
Working with the Payment Wizard - SAP Business One 8.82 - SAP Library
https://help.sap.com/saphelp_sbo882/helpdata/en/45/1bff3651ee6c1ae10000000a1553f6/content.htm
Hope this help
Regards::::
Atul Chakraborty

Stuck in file transfer mode?

I recently bought a NOkia 5310 express music phone, and I'm trying to copy some songs onto it. Whenever I try to get it set up to copy the music it says that my phone is "in file transfer mode, and cannot be use with pc suite, quit file transfer mode from the phone if you want to use the phone with pc suite". I have no idea what file transfer mode is, or how to get out of it. anyone have any idea?

Hi,
First of all, it doesn't matter if you choose the option of "PC Suite" or "Media". It works both way when all you want to do is to transfer music. I personally wouldn't choose "Media". Somehow for my N97, my Messenging will switch back from mass memory to phone memory and it is really annoying. At times when I choose "Media", my computer says that the USB is connected in non-compatible mode etc.
One thing I notice too is that my music player would be "hanged" if connected via USB. Nothing we can do. To listen to your music using your phone, I reckon you have to stop the USB connection. So that is normal.
Using menu setting to PC Suite saves you the trouble of having to select the mode EVERYTIME. So, that too is a good choice.
Let's forget about OVI Player for a moment. After you plug in your phone, if you start the PC Suite, you should see that your phone is detected. If not, try reconnect the cable, try using PC Suite to connect to the phone (there is a button to do that I remember if the phone is not detected). If still cannot, like my friend, you will probably need to reinstall the latest firmware via Nokia Care Store.
Let's say your PC Suite application can detect your phone, you may wish to see if you can transfer the music. You may wanna do one testing here. Open up the File Manager from your PC Suite. Transfer the songs manually, then do a refresh at your Music Library of your phone. You should see the tracks. If yours is a Comes With Music like mine, you can get the licence over the air. Once that is done, I suppose you should be able to transfer the music files via your OVI Player. While, it is tedious, but that was how it works for me.
I wish Nokia is easier on us, but it is not. Sorry.
Visit http://www.WilfridWong.com - where all good things are meant to be shared!

How do I apply a transfer mode to a SPECIFIC layer without a mask?

Similar Messages

Maybe you are looking for