How do I apply renamed display profiles in Display Preferences?

Can someone tell me how I get my renamed colour profiles to show with their new names in Display Preferences?
After creating new profiles when calibrating my monitor, I discovered that because the applied profile names were too long to show up in the display preferences profiles list, they were automatically shortened, thus showing only the prefixed display name part. The result being that they all appear in the list, as having the same name. (I know that holding the pointer over a profile reveals the full profile name, but that is a real pain to have to do each time.)
I discovered that renaming profiles is done via Apple Scripts, but although that changes the name in the Profiles folder (under ColorSync), it has no effect on the names in the display preferences window. Can it be done? If so, how?
Help would be much appreciated.

Hello. Perhaps this is because you are trying to arrange the order of many VPN services, since only one VPN service can be selected at once in System Preferences. In my original post, I did not mean that; I meant that I wanted to arrange the order of VPN configurations within a VPN service. In this screenshot, I have one VPN service only:
And in the following one, it is shown that there are more than one VPN configurations within that VPN service:
Furthermore, it was the order of VPN configurations that I wanted to change, not the order of VPN services. If you are trying to change the order of VPN services, I do not have a solution.

Similar Messages

  • How do I delete a display color profile?

    How do I delete a display color profile?  I created several over time when calibrating monitor with a Datacolor Spyder.  I have not been able to delete any old profiles because the "Delete Profile" button is grayed out and not responding.  I repaired permissions but that didn't help.

    Shared Profiles are located in the following folder:
    /Library/ColorSync/Profiles/Displays/
    From the finder menu bar, Go... > Go to Folder > /Library/ColorSync/Profiles/Displays/

  • When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

    When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

    First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
    A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
    Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
    Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
    Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

  • How do I apply ICC profiles previously down loaded on computer before installing Elements 12

    How do I apply ICC profiles previously downloaded on my computer before loading elements 12

    run the cleaner, http://www.adobe.com/support/contact/cscleanertool.html

  • How to apply lens correction profile to multiple images at once?

    I have a quick newbie question and I couldn't find an answer in a brief search that I did. Is it possible to apply lens correction profile automatically to multiple images at once? For my RAW images, LR automatically detects the lens and applies the correction profile for an image if I manually click on "Enable lens correction" option under Develop module (in the right pane where adjustments are made). However, I would like to do this to multiple images all at once.
    Thanks,
    Osho

    Be careful using develop setting synchronization for lens profile across mutiple images! This allows applying an incorrect profile (i.e. Canon 17-40mm profile with synchronization to images shot with multiple lenses) First use the 'filter' tool to make sure you select images shot with only one (1) lens type. Then follow one of the procedures here:
    http://help.adobe.com/en_US/Lightroom/3.0/Using/WS0E6E6886-E223-4050-B6E0-A97B5B62EF7D.htm l
    You can also change the "default" develop settings with 'Lens Profile' option checked and then save as the "new default" setting. LR will then "automatically" apply lens profile correction on import of new images.

  • How do I apply programmatic skins for completely custom drawn components of a Flex library project?

    Hello folks,
    I am looking for best practices advice when (1) creating
    custom components and (2) styling and skinning.
    I already know how to skin a component part of the Flex
    framework. I can make a class extending ProgrammaticSkin and have
    my component skinned using CSS to link the component with the
    reference to my custom class.
    However what about those cases when you are completely
    creating a component from scratch?
    Imagine a "Freehand Drawing Canvas" component that allows the
    user to draw on it and has some buttons to set color styles, line
    styles, etc., or imagine a "Screen Flow Gallery" component that
    displays visual objects in a fashion similar to Cover Flow in the
    Mac.
    In many components I am aware you may reuse other components
    part of the Flex framework but I am trying to picture an scenario
    where you would need to draw everything yourself because there just
    isn't something to base it upon so you will end up drawing it from
    scratch.
    To learn how instead of building one of those components I
    mentioned previously I decided to start with something simple that
    would illustrate this like a LiteButton component that will behave
    just like the Flex mx.controls.Button but will extend UIComponent
    and be completely custom drawn.
    The component will have a default look and will also be
    style-able and skin-able. I will provide styles for users of the
    component to modify and regarding skinning anyone can create a
    custom ProgrammaticSkin adding its own drawing logic and link it to
    the component via CSS with the ClassReference applied to the skin
    selector.
    So far so good and it's clear what I want to achieve. I
    actually know how to do most of the stuff here but I have one
    single problem.
    Here is my question, where should I put my custom drawing
    logic? If I do it in the updateDisplayList inside the class
    extending UIComponent it works, however I thought that it would be
    a better practice to do it using programmatic skins, that way I
    could provide different skin themes for my component set.
    The problem is that I can't make the programmatic work in
    this scenario. I tried instantiating the custom programmatic skin
    during the updateDisplayList of the LiteButton component and adding
    it to my display object via addChild but that didn't do anything. I
    also tried creating a "default.css" stylesheet and tried to use
    ClassReference as I would normally do to skin an already existing
    component (or composite component as well) but that didn't do
    anything either.
    So how do I apply programmatic skins for completely custom
    drawn components of my Flex library project?
    I could do it inside the updateDisplayList of the LiteButton
    class extending UIComponent but again I would like to provide
    different theme sets for my components so it makes sense using
    programmatic skins.

    "jbucaran" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hello folks,
    >
    > I am looking for best practices advice when (1) creating
    custom components
    > and
    > (2) styling and skinning.
    >
    > I already know how to skin a component part of the Flex
    framework. I can
    > make
    > a class extending ProgrammaticSkin and have my component
    skinned using CSS
    > to
    > link the component with the reference to my custom
    class.
    >
    > However what about those cases when you are completely
    creating a
    > component
    > from scratch?
    >
    > Imagine a "Freehand Drawing Canvas" component that
    allows the user to draw
    > on
    > it and has some buttons to set color styles, line
    styles, etc., or imagine
    > a
    > "Screen Flow Gallery" component that displays visual
    objects in a fashion
    > similar to Cover Flow in the Mac.
    >
    > In many components I am aware you may reuse other
    components part of the
    > Flex
    > framework but I am trying to picture an scenario where
    you would need to
    > draw
    > everything yourself because there just isn't something
    to base it upon so
    > you
    > will end up drawing it from scratch.
    This may help with that
    http://livedocs.adobe.com/flex/3/html/help.html?content=skinstyle_3.html
    > To learn how instead of building one of those components
    I mentioned
    > previously I decided to start with something simple that
    would illustrate
    > this
    > like a LiteButton component that will behave just like
    the Flex
    > mx.controls.Button but will extend UIComponent and be
    completely custom
    > drawn.
    >
    > The component will have a default look and will also be
    style-able and
    > skin-able. I will provide styles for users of the
    component to modify and
    > regarding skinning anyone can create a custom
    ProgrammaticSkin adding its
    > own
    > drawing logic and link it to the component via CSS with
    the ClassReference
    > applied to the skin selector.
    >
    > So far so good and it's clear what I want to achieve.
    Actually after
    > playing
    > with the weekend and today I know how to do most of the
    stuff but I have
    > one
    > single problem. So here is my question, where should I
    provide my custom
    > drawing logic? If I do it in the updateDisplayList
    inside the class
    > extending
    > UIComponent it works, however I thought that it would be
    a better practice
    > to
    > do it using programmatic skins, that way I could provide
    different skin
    > themes
    > for my component set.
    These aren't mutually exclusive. When you provide a skin with
    a
    TypeSelector, you have to add it to the display list
    somewhere, and this is
    typically done in updateDisplayList or addChildren. I prefer
    to do it in
    updateDisplayList, because you can then change it if the
    style changes.
    > The problem is that I can't make the programmatic work
    in this scenario. I
    > tried instantiating the custom programmatic skin during
    the
    > updateDisplayList
    > of the LiteButton component and adding it to my display
    object via
    > addChild but
    > that didn't do anything.
    Exactly what did you do?
    > I also tried creating a "default.css" stylesheet and
    > tried to use ClassReference as I would normally do to
    skin an already
    > existing
    > component (or composite component as well) but that
    didn't do anything
    > either.
    I've never had any problem using an approach similar to
    this...but I will
    say that I couldn't see any advantage in creating a
    default.css style sheet,
    since it's not really default in the way that the one that
    comes with Flex
    is. It's much more obvious to anyone using your component
    what's going on
    there if you create a style sheet where they're likely to
    spot it.
    > So how do I apply programmatic skins with the default
    look for custom
    > drawn
    > components?
    It seems like your approach is fine, but maybe you've made a
    mistake in your
    implementation.
    > I could do it inside the updateDisplayList of the
    LiteButton class
    > extending
    > UIComponent but again I would like to provide different
    theme sets for my
    > components so it makes sense using programmatic skins.
    You might want to consider also adding an instance of
    HaloBorder to your
    component. That brings a lot of functionality with it.
    HTH;
    Amy

  • How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

    How do I renew a provisioning profile that has expired on my phone? I use an app for the company I work for and I cannot open it because it says the provisioning profile has expired.

    i'm not quiet sure atm but should normally work like this:
    connect to itunes store -> log out with ur account (upper right corner where ur apple id is displayed) -> sign in with ur wifes apple id -> activate computer (store->activate this computer)
    normally it should work this way but ur wife wont be able to use apps or music within itunes library purchased with the other apple id

  • How do I install custom printer profiles in Mac os mountain lion. I can.t fine the icc profiles directory (if that's what it is).

    How do I install custom printer profiles in Mac os mountain lion. I can't find the icc profiles directory (if that's what it is).

    NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. You'll need to do it again after each system update that's applied.
    OT

  • How do you apply the school proxy settings to the ipad to filter website searches?

    How do you apply the school proxy settings to the ipad to filter website searches?

    Hi Stebop1987,
    You will want to apply a configuration profile with Global HTTP proxy settings to your proxy server. Use Apple Configurator or an MDM to deploy the configuration profile to your fleet of iPads. I recommend you contact your web filter provider for detials on what proxy details to enter in the configuration profile (type, server, port, username, password).
    Hope this helps!
    ~Joe

  • How do you manipulate and display multiple DAQ channels?

    I have two sensors wired into the same DAQ (USB) module.  I can monitor the signals in LabView using DAQ Assistant, but I'm having trouble separating the channels.  I would like to display the signals on separate waveform charts and also apply different conversion formulas to each one before writing the data to a file.  However, I can't find any way to distinguish between the two signals in either of the express VIs for these tasks.  I can display both signals simultaneously in one or more charts, but I can't figure out how to make each chart display a different signal.  I searched through LabView help and finished the DAQ tutorial, but neither helped with this simple problem.  It's very important that I learn to work with multiple channels, because I'll eventually have even more signals coming into this DAQ hardware.

    Hey Jonnyboy,
    Check out the example called Select Signals.vi.  Are you using dynamic data?  Go to Help>>Find Examples... and type select as the search word. 
    Basically you have to index the one that you want using the Select Signal express VI.
    Hope that helps get you in the right direction.
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Development Module:  Apply Camera Calibration Profile to existing RAWs

    Hi - I just found how to change the default settings in Camera Calibration (ALT changes the Reset to Set Default) and from what I can find, any newly imported RAWs will have these defaults applied.  My question is: how do I apply these defaults to images already imported?
    Also, what I specifically want to change is the Profile: Adobe Standard to Profile:Camera Landscape (for example) and apply that to all the images I already have shot with this specific camera body.   So, two questions:  Does setting the defaults include the Profile or is it only the "Shadows, Primary Red, Green, Blue" that gets saved as a new default and can these changes only be applied to newly imported RAWs?
    Thanks

    Roxie380 wrote:
    Also, what I specifically want to change is the Profile: Adobe Standard to Profile:Camera Landscape (for example) and apply that to all the images I already have shot with this specific camera body.   So, two questions:  Does setting the defaults include the Profile or is it only the "Shadows, Primary Red, Green, Blue" that gets saved as a new default and can these changes only be applied to newly imported RAWs?
    Thanks
    Default setting include ALL Develop settings, including the settings in the basic panel, the lens corrections etc. For this reason, you should take a test image, perform a reset first, then apply what you want to be active in your defaults, and set the Default.
    Defaults will only be applied to your images (based on Camera Model) while importing or when doing a "Reset".
    Beat

  • How does one update a stroke profile?

    I'd like to globally update a stroke profile by overwriting an existing profile. But AI says "That name is is use. Choose another name". How do I overwrite an existing profile so it is updated throughout the document?

    CS 5 you can use the wi8dth tool to create a new variable width stroke and save it as a profile
    vasil is absolutely correct if you create a graphic style of the original profile and then create a new proflie and make it a graphic style an Option Command or Contol Alt drag it on top of the graphic style of the previous Graphic Style of the Profile you wish to replace it will update all the strokes but if the profiles are applied before you make a graphic style of the profile then only the strokes that were aqpplied as a graphic style will be updated including the one you made the graphic style from, but anyprofile applied before they became the proilfe was introduced as a graphic style will remain.
    So apply the profile as a graphic style if you will need to update them.
    Otherwise there is no way to simply replace the profile i nhe list of profiles to0 update them

  • How can i bulk rename music files in reverse order from artist - song name to songname - artist

    How can I bulk rename music files in reverse order from artist - song name to songname - artist.
    I actually dont need to rename the actual files.
    Its just i have a huge txt list of 100,000 music names that are listed as so..
    Artist - Song Name
    Artist - Song Name
    Artist - Song Name
    Artist - Song Name
    Artist - Song Name
    Artist - Song Name
    and i need this list to reverse it self so it is listed in the list as
    Song Name - Artist
    Song Name - Artist
    Song Name - Artist
    Song Name - Artist
    Song Name - Artist
    Song Name - Artist
    Song Name - Artist
    Im sure there is some kinda way to auto a mix of applescript/automator/terminal to do something like:  all char before the "-" replace with the chars after the "-".
    Please some one help me if you know how I can pull this off

    How can I bulk rename music files in reverse order from artist - song name to songname - artist.
    I actually dont need to rename the actual files.
    Its just i have a huge txt list of 100,000 music names that are listed as so.
    I wonder if we haven't misunderstood what you were asking for. Could it be that you have not a huge file, but just a huge list of names in many small files. If that's the case, you should rather use the following script instead of the previous one.
    Since this script does not rename the files, make a backup of your files before running it.
    set theFolder to choose folder -- the folder containing your text files
    tell application "Finder"
        set theNames to name of files of theFolder whose name extension is "txt"
    end tell
    set theTextFiles to {}
    set theFolderPath to POSIX path of theFolder
    repeat with thisName in theNames
        copy theFolderPath & thisName to the end of theTextFiles
    end repeat
    repeat with thisFile in theTextFiles
        set F1 to open for access thisFile
        set theText to read F1
        close access F1
        set theParagraphs to paragraphs of theText
        set bigList to (a reference to theParagraphs)
        set theNewParagraphs to {}
        set bigNewList to (a reference to theNewParagraphs)
        repeat with X in bigList
            set P to offset of " - " in X
            if P = 0 then
                set Y to X
            else
                set Y to text (P + 3) through -1 of X & " - " & text 1 through (P - 1) of X
            end if
            copy Y & return to the end of bigNewList
        end repeat
        set theNewText to text 1 through -2 of (bigNewList as text)
        set F2 to open for access thisFile with write permission
        set eof F2 to 0
        write theNewText to F2
        close access F2
    end repeat
    display dialog "Done!" buttons {"OK"} default button 1 with icon 1
    Message was edited by: Pierre L.

  • Firefox profile missing message when trying to open Firefox...so, how do I rebuild my Firefox Profile on an iMac? None of the existing responses/solutions work!

    OSX Mavericks...After I download Firefox it will not open. Message box appears indicating my profile is missing or cannot be found. All existing solutions speak to 'Open Profile Manager'...there is no such program on a Mac. Mozilla expert/technician needed ASAP. Please explain in clear and plain language how I get Firefox back.

    # Click the Finder icon in the dock.
    # On the menu bar, click the ''Go'' menu, hold down the '''option''' or '''alt''' key and select ''Library''. A window will open containing your Library folder.
    # Open the "Application Support" folder, then open the "Firefox" folder.
    # Rename the ''profiles.ini'' file to ''profiles.ini-old''
    # The next time you start Firefox, it should start with a brand new profile. See the following article for directions on recovering data from your old profile.
    #* [[Recovering important data from an old profile]]
    ''Neil1955 wrote:''
    The next section 'For additional details, see "Use the Profile Manager to create and remove Firefox profiles does not refer to Macs...it speaks to 32-bit and 64-bit windows.
    Provided that JavaScript and cookies are enabled in your browser, support articles will show you information relevant to your operating system. You can also click the Editing Tools section on the left and choose to see information for a different operating system or version of Firefox.

  • Apply MacBook display settings to external monitor

    Hi. The display on MacBooks and other Macs is beautiful, and I wish I can bring those display and color settings to my external monitor, because no matter how much I calibrate using the one under system preferences or adjust the setting directly on the monitor itself, it does look as nice as it does on my MacBook Air to which the display is connected. I can see all the figues in System Preferences -> Displays -> Color tab -> Open Profile, of both MacBook Air and the external monitor, but is there a way I can manually change those figures of the external monitor so that they are same as those of MacBook Air?
    Thanks.

    Yeah, I've changed the Display Profile of my HDTV (connected as a monitor).
    If you go into System Preferences > Displays then click Gather Displays and click on the Color Tab for your monitor, deselect "Show profiles for this display only." You should be able to chose the same Display Profile for you monitor as your Mac.

Maybe you are looking for