How do I apply Smart Filters to video layers?

Hello! This is my first time making an animated GIF in Photoshop, so I'm a little frustrated. I've looked all over the web and on the Adobe site on how to apply filters throughout all video layers. All resources tell me to "convert the video layer into a Smart Object and apply filters, which will carry throughout the other layers." I open up my GIF file and convert my very first layer/frame into a Smart Object and apply my Reduce Noise filter; when I do this, the filter only applies to the first layer/frame and not for the other 187 layers/frames. Can anyone explain what I'm doing wrong?

put levels on which you want to apply the filter, you will see them in the time line as a group ten apply filter, you can also adgust them all in time line...
sam

Similar Messages

  • How to use Quartz Composer as a video effect?

    Hello everybody,
    I recorded a movie with my iSight camera. And now I want to apply a Quartz Composer effect that I created. I put the Quicktime Movie in the same folder as the .qtc file and imported it via the "Movie Loader". Thats works fine in the Quartz Composer Preview window.
    But everytime I exported it from Quartz Composer as a Quicktime movie, the place where the movie is, is just white. No movie.
    I tried to open the .qtz file in Quicktime, but I got the same result.
    What settings do I have to make, to make sure my movie is exported to Quicktime?
    I'm quite new to Quartz Composer, but I hope somebody can help me.
    Thank you very much,
    Jan
    Message was edited by: Jan Riggert
    Message was edited by: Jan Riggert

    You'll want to use Core Video which is technically part of QC and yes I do believe you can apply QC filters to video clips using Core Video.
    Apple's Guide to Core Video is here: http://developer.apple.com/documentation/GraphicsImaging/Conceptual/CoreVideo/CV ProgIntro/chapter_1_section1.html
    There are also Core Video examples in the Developer Example code folder in the Quartz folder.
    Hope that helps,
    =Tod

  • How do I apply a filter or Rubber Stamp to an entire video clip in Photoshop CS6?

    I see if I apply and adjustment layer, it works for the whole clip but any filter outside of that or rubber stamp only lasts for a few frames. How do I apply them to the entire clip?

    Seems like converting the layer to a Smart Object sort of works but once I do I can't play the footage
    <iframe title='AdobeTV video player' width='442' height='256' src='http://tv.adobe.com/embed/708/9366/' frameborder='0' allowfullscreen scrolling='no'></iframe>

  • How do I apply a filter to a video clip? (Without having to do it individually to each frame)

    How do I apply a filter to a video clip? (Without having to do it individually to each frame)

    put levels on which you want to apply the filter, you will see them in the time line as a group ten apply filter, you can also adgust them all in time line...
    sam

  • Ps CS6 Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask

    Ps CS6
    OSX 10.6.8
    Problem: Transform applied to Smart Object fails to transform an attached Smart Filters Mask.
    I mean a Transform, including Free Transform, as found in the Edit menu.  A simple move by the Move Tool is OK.
    A workaround until this bug is squashed is to encapsulate the Smart Object + Smart Filters + Filter Mask inside another Smart Object and transform that.
    However, that will not be a satisfactory solution in some cases. If a filter has size parameter(s), e.g. Gaussian Blur radius, a scaling or warping/distorting transform applied after the filter will obviously differ from the filter applied after the transform.
    In any case, the workaround is inconvenient to subsequent editing and experimenting with filters and masks.

    R_Kelly wrote:
    I don't think that's a bug since the implementation seems to be purposely done.
    It's been that way since photoshop cs3.
    If its been like that since CS3 then I think it's a bug which remains because nobody (or not enough people) has complained before.

  • How do I apply AUTO COLOR to an entire 2-hour .mov video?

    How do I apply AUTO COLOR to an entire 2-hour .mov video, please?

    Hi,
    Image > Auto Color results can be achieved by setting the Auto options of  Curves.
    1. Open .mov file in Photoshop CS6
    2. Click on the Curves icon in the Adjustments panel.
    3. Opt/Alt click on [Auto] button.
    4. Set Algorithms radio button to "Find Dark & Light Colors", then click [OK].
       - (My notes indicate that "Snap Neutral Midtones" should be ON also, but I'm not seeing that to be true.)
    Result: The Curves adjustment layer that uses the same algorithms as Auto Color is applied to the entire clip.
    The Auto Image adjustments can  be accessed via the Curves' Auto options:
    Image > Auto Levels =  Enhance Per Channel Contrast algorithm
    Image > Auto Contrast =  Enhance Monochromatic Contrast algorithm
    Image > Auto Color = Find Dark & Light Colors + Snap Neutral Midtones ON
    Hope that helps!
    Meredith

  • HT1535 my iphone 5 will swithch back to automatic mode even after i applied manual management songs/videos, how to fix it?

    my iphone 5 will swithch back to automatic mode even after i applied manual management songs/videos, how to fix it?

    I have reset my phone a large number of times. It doesn't work. I am now reseting and setting it up as a new phone every 2 days. It works for a while and then teh cycle repeats.

  • Smart filters that blend through multiple layers?

    Does anyone know if this is possible? I'd like to use Smart Filters - or something - to stack filters in a way that's cumulative and applied to the layers below. It's been a couple versions since I really sank my teeth into the deeper parts of layer blending. Just wondering if this is possible. I know how to simulate the effect with clever masking and lots of filters, I was just wondering if it's been implemented in a more interactive way.
    For example, I'd like to create a Gaussian Blur masked effect (white box below), and layer it up with other Gaussian Blur effect layers so that their effect where they overlap is cumulative (blue box). Basically I'd like the area of the effect to be a live, movable widget, and be able to arrange these widgets dynamically.
    Make sense? Is this a feature request? Or is it one of those "oh man that's been in Photoshop since 3.0, you didn't know?" things.

    Well, in Photoshop CS2 I haven't seen any way to do that, although if you find a way be sure to share!!
    But CS2 does have some image-modifying filter-like layers (AKA fills and adjustment layers). It creates a new layer that applies adjustments to the layers underneath and it has an editable mask. Although they don't have as much variety as filters themselves (or gaussian blurs for that matter), they are stackable and incredibly useful when you want reversable edits!
    The adjustment layer button are right by the "New Layer" button--it's the half black half white circle. Sorry if you already knew about this, just trying to be of at least some help! Maybe those CS3-54 users can provide further insight into this...?
    -Monica

  • How do I get songs from iPod(video) to iTunes(7 and using VISTA).

    How do I get songs from iPod(video) to iTunes(i'm using iTunes7 and Vista).
    I don't have the disc, cause i can't find it. But my computer downloaded the ipod, it just cant find the files?
    i've been looking through the topics for the past hour and none of them helped. Maybe i'm stupid i dont really know, but i've restored my old computer a couple times and i found a post and it helped both times. now i can't find it anymore.
    THIS IS THE ONE I'VE BEEN SEEING AND IT DOESN'T HELP ME ONE BIT:
    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.
    Can someone give me a link, or tell me one that shows step by step.

    Here is a way of doing it, for another take on this, search the forum for posts by Zevoneer.
    Copy from iPod to PC
    It is important not to allow your iPod to sync with an empty library. If it is set to synchronise automatically you will get a message saying your iPod is linked to a different library and asking if you want to sync – it is important to press cancel as syncing with an empty library erases all music from your iPod.
    You can also prevent auto sync by holding down shift & ctrl as you plug in your iPod and keeping the keys held down until the iPod appears in iTunes.
    Once you are connected, you need to set your iPod to manage music manually.
    http://docs.info.apple.com/article.html?artnum=61148
    If you have an iPod with iTunes Store purchases on it, you can use it to copy your purchases to other authorized computers.
    http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2586win.html
    However this is not allowed for other music.
    This MacMuse tip tells you how to copy music from your iPod using Windows Explorer, but it is a bit fiddly:
    http://discussions.apple.com/messageview.jspa?messageID=797432
    Otherwise you can use third party software to manage the transfer, there are a variety of programs out there, some free and some that will copy ratings and counts as well as the music files. Here is a selection, check them out and see what suits you.
    http://www.yamipod.com/main/modules/home/
    http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
    http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage
    http://www.copytrans.net/
    You can find others by Googling: copy iPod to iTunes
    There is a useful background article on copying from your iPod here:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

  • How to Print a Character in Reverse video ...?

    Hi Could any one of you help me " How to print a character in Reverse Video " in SMART Forms and in SAP Scripts.
    Regards,
    Saravanan
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Mar 26, 2009 5:31 PM

    deepak_c3 wrote:
    Thanks for the info.,
    where should the page number n-1-i be returned ?
    Which method implementation of Pageable interface should return the page number ?w.r.t. your first question: don't return that number but return page n-1-i when page i is requested; your document will be printed in reverse order. Your class should implement the entire interface and wrap the original Pageable. (for that number n your class can consult the wrapped interface; read the API for the Pageable interface).
    kind regards,
    Jos

  • How can I view just music - not videos - in the libary and playlists?

    I've noticed that when creating smart playlists and viewing the libarary I cannot filter out videos... is there a way to do this without having to just uncheck the videos and pretend they aren't there or is this something that apple didn't think of?
    I want to create smart playlists to listen to in my car and want to back up my library on dvd-roms, that is where this becomes a problem. If anyone knows how to change the settings so that videos don't show up in certain playlists or on the libarary I would appreciate it a lot.

    How can I view my full billing history for the app and music stores without iTunes installed?
    No.
    If my account has been compromised
    If you even think this may have happened, immediately change your password.
    See this -> Apple ID: Changing your password

  • How can I apply text position attributes (e.g. lower third) to more than one title at a time?

    How can I apply text position attributes (e.g. lower third) to more than one title at a time?

    jhb3243
    What version of Premiere Elements are you using and on what computer operating system is it running?
    In the case of this theoretical lower third to be applied to more than one title at a time
    a. Is there text in the lower third besides a graphic of some kind?
    b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
    If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
    I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
    Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
    Thanks.
    ATR

  • How do I apply a skin to a Captivate project?

    I have created a skin in the skin editor. How do I apply it to an existing project? How do I apply it to a new project? I have searched the online help for instructions and I can't find them, if they exist.
    TIA.

    Hi there
    I just uploaded a small video to Jing. See if it helps you resolve the issue.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • How can I enable Texture filters on a 16 bit file in Photoshop CC?

    I am trying to use the texture filters in Photoshop CC and when I try to open them on a 16 bit file the texture category is grayed out. I have a method  from a Peachpit article by Helen Bradley that uses texture filters to apply a border around an image. How can I enable texture filters?

    If you are talking about the Filter Gallery, you can't use that on 16 bit files. What you can do is duplicate the current 16 bit file and convert to 8 bit, run the various filters to get the border around you image than take the border from the 8 bit file and copy/paste it back into the 16 bit file...

  • How do I apply the blur filter to all my layers at the same time?

    Hi I'm working on a background for a web page and I want to try how different filters are going to affect all the layers. Is it possible to apply a filter to all the layers without flattening the file first? Thanks very much,
    Cathy

    Thanks very much , that's really helpful,Cathy
    Date: Thu, 23 Dec 2010 11:18:21 -0700
    From: [email protected]
    To: [email protected]
    Subject: How do I apply the blur filter to all my layers at the same time?
    Hello!
    There is no need to flatten the file, but you can create a layer that merges all the content of the image, and apply the filter on that layer.
    Target the topmost layer, by holding the Option and . (period) keys, then create a merged copy by holding down Command Shift Option E.
    >

Maybe you are looking for

  • Need help with cartesian join

    Hi, I have data like this create table dd1 (col1 varchar2(20)) insert into dd1 values('P1') insert into dd1 values('P2') insert into dd1 values('P3') insert into dd1 values('P4') Col1 P1 P2 P3 P4 I need result like this: Col1 col2 P1 P2 P1 P3 P1 P4 P

  • Can I just open block diagram only

    Like I can have only front panel opened. Reason is when I have bunch of VIs open, I get too many windows to manage even while using 2 monitors. It will be nice if I can just have the window for block diagram open, if I need the front panel while edit

  • Report Painter/ Writer - Query on Testing of customization changes

    Hello, Customer requirement is to add newly created GL accounts as line Items in existing Zee report under Report Painter. The same is done. But, how can we do the testing, if any ? Regards.

  • Help Identiying a Font

    I am doing some video work for a client and need to do some work their logo. Problem is they have no idea what the face is...nor does their agency (who are too lazy to do what I am tryng to do). So...can anyone perhaps help me ID the font used in the

  • Can't find the feedback button

    I'm running aurora and recently noticed the "firefox makes me sad" button is missing from my toolbar. When I customize the toolbar I don't see the button as an option in there either.