How do I apply the blur filter to all my layers at the same time?
Hi I'm working on a background for a web page and I want to try how different filters are going to affect all the layers. Is it possible to apply a filter to all the layers without flattening the file first? Thanks very much,
Cathy
Thanks very much , that's really helpful,Cathy
Date: Thu, 23 Dec 2010 11:18:21 -0700
From: [email protected]
To: [email protected]
Subject: How do I apply the blur filter to all my layers at the same time?
Hello!
There is no need to flatten the file, but you can create a layer that merges all the content of the image, and apply the filter on that layer.
Target the topmost layer, by holding the Option and . (period) keys, then create a merged copy by holding down Command Shift Option E.
>
Similar Messages
-
How do you apply the same password policy to every PDF document you create with inDesign?
All,
Adobe peeps!,
I don't know if this is really supported with inDesign 5.5, but here is my my use case:
I constantly create more than 10 PDFs a day using inDesign
On all PDF's I create, i want to apply password security to protect them
But in order to do so, within inDesign, I am always forced to go to the "security dialogue" pane to set up the same permission and passwords over and over again
This gets tiring :/
So what I am hoping to do is the following:
Like acrobat, I want to create a password policy within inDesign
I want all PDFs created to have such a password policy be automatically applied
I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
So my questions are:
Is it possible to create password security policies in inDesign?
Is it possible to apply the same password security policy to every PDF i create in inDesign?
If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
If all fails, do you guys know of any extensions that can support this?
Any help would be great. Thanks!Steve,
Thanks for your notes. To follow up on your response.
Bummer. I kinda had a hunch at this inDesign limitation.
I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
PS. I am using acrobat pro x. -
How do you apply the same transformation to multiple layers?
I've been using PS for years and never had to do this before.
I have a 3D image of a tradeshow exhibit and I want to drop in a lot of different mocks for backgrounds. The 3D is in a slight perspective and I need to transform all the mocks to fit that space.
So how do I link my backgrounds and apply the same "skew" or free transform to all of the layers?
PS version CC 14.2.1 x64What exactly am I alt+dragging?
My mistake. I was thinking about filters and alt-dragging them to a new layer. For a transform, you most likely will want to make one master SO, apply the transformation, then make duplicates via copy from the layer flyout menu. Then you can replace the content with the other layers. -
How can I apply the same crop to multiple photos?
It is easy to apply the same Adjust settings to multiple photos by using the Copy and Paste in the Adjust pane. Or by using iPhoto Batch Enhancer.
But can you apply the same crop to multiple photos? I don't see any way to copy a crop. iPhoto Batch Enhancer can do something like it but, being an external editor, it does so on a copy of the photo. I want it on the original photo. (Well, it's not really the original since that one is saved separately in the Library but on the current version).
Thanks for any suggestion.
BoHere's how:
1 - bring up the first photo in the edit window and click on the Crop button or *use the "C" key on the keyboard*.
2 - set the crop size/ratio in the menu and position the crop window over the photo as needed.
3 - click the Apply button or *use the Enter key*.
4 - click on the right arrow in iPhoto or *use the right arrow key on the keyboard* to bring up the next photo.
5 - click the "C" key to bring up the crop function.
6 - repeat steps 2 thru 5 for each photo.
This video screenshot shows how:
Click to view video screenshot
Happy Holidays -
How to use at the same time the audio sounds of a keyboard & the midi sounds with mainstage
Hello! hope you can shed some light on my problem! I want to be able to use at the same time the real sounds of korg sv-1(stage keyboard, but it could be any stage piano with USB midi) and use other sounds from mainstage. Of course i switch between patches and sets with a footpedal so i can be quick with my changes of sounds so I try to keep my hands on the keys.
My question is: Is there a way that one moment for example i have a silend patch (from mainstage) and the real sound i want passing through audio and the next moment silence from korg and the next patch a sound from mainstage? Or even combine them. I mean in general how am I able to integrate the sounds I prepared and organised in patches in mainstage with the beautiful piano & rhode sounds of my sv-1?
thanx in advance for your response!Yes. To have a silent Mainstage patch, simply do not create any instrument channel strips. To have the SV-1 silent on a patch you should be able to set and save the volume for that patch to 0. As an alternative you could turn local off on the SV-1( this function will reset to local on after the SV-1 has been turned off). With local off you can determine with each Mainstage patch whether or not you want to transmit MIDI to the external instrument(SV-1) channel strip. If you have local on, be careful not to create a MIDI feedback/loop with the SV-1. This is a lot of info to digest at once, so take it slowly, step by step. Snapshots below are somewhat in order.
Click on the cog wheel in the upper right corner of the channel strips section to get to this menu. Select add external instrument channel strip.
The external channel instrument strip will look like this.
Click on the MIDI output box to show the display below and choose your external keyboard destination(SV-1).
In the channel strip inspector you can send patch changes to the SV-1.
Here is where you select the MIDI input for routing MIDI to the SV-1. If want no SV-1 sound for this Mainstage patch, select none.
You'll need to play with these parameters to get the desired results. Stepping through the MS patches with a footswitch can be done, too, but that can wait for now. Post another question when you master these steps. -
How to record at the same time broadcast an internet tv show?
I do an internet tv show on stickam.com and I use the flash
live camera feed to broadcast. The website has a way to record the
video ....but I would like to record to my hard drive. Is there a
way to do that?
Thanks,
Johnwell, cygwin will not be able to "zip" at the same time, nor will unix does.
this is because "zip" can not be written/read sequentially, as gzip/compress could
if you use tar+compress, you could do that with pipes. I tried and it seems cygwin can do pipes (I did not know). but
mknod mypipe p
gzip <mypipe >dmp.z &
exp file=mypipe did not work as it would in unix
Message was edited by:
Laurent Schneider
well, maybe zip could work on unix. I just remind zip/unzip as basically not working thru pipes. But under certain circumstances, it may work... -
How can I apply the same filter to multiple inboxes?
I am looking at transitioning from Outlook to Thunderbird -- mostly for the Google calendar integration.
The one thing I am having problems with is the filters. I have multiple email addresses and I would like to be able to apply one filter to all of the email addresses. Ie: I get an email from Bob sent to me on my email address 1 and the email goes to bob's folder. Then I get an email from Bob on my email address 2.
I would like to have the same rule to be effective for both of my email addresses so if bob uses either email address, the mail goes to bob's folder.
Right now it appears that I have to create a unique filter if I get email from 'bob' on email address 1 vs email address 2. Am I missing something?Nope. Thunderbird's filters are specific to accounts.
You could set them up in one account, then copy that account's ''msgFilterRules.dat'' file to your other accounts. -
How do you apply the same filter to more clips simultaneously?
I am trying to color correct a group of sequential clips and I was wondering if there is a way to apply the filter as if the clips were one single clip, without first exporting them.
Thank you for the help.If you want to make the same color correction to multiple clips. color correct the first clip.
copy the clip
In the timeline highlight all the other clips you want the same color correction to be placed on.
Control-click a highlighted clip
Select paste attributes
check the filters box, hit okay -
How do I apply the same set of commands?
I am sorry if I am overlooking this, but this is hard to
search for in the manual. If i want to go to an object, or
keyframe, and transform it ...scale it, etc. and change color, or
apply a transition... in other words, change more than one thing at
a time, and I need to do this to a number of objects, can I record
this (like in photoshop) and do the same changes again and again
just by using a shortcut?lucy kafka <[email protected]> wrote:
> I am sorry if I am overlooking this, but this is hard to
search for
> in the manual. If i want to go to an object, or
keyframe, and
> transform it ...scale it, etc. and change color, or
apply a
> transition... in other words, change more than one thing
at a time,
> and I need to do this to a number of objects, can I
record this (like
> in photoshop) and do the same changes again and again
just by using a
> shortcut?
If you`re doing it with Actionscript you can pack your
commands into a
function.
Flash itsef does not deliver any macro functionality afaik,
but you could try some third-party-software like "Auto It"
(freeware).
Freundliche Grüße,
Franz Marksteiner -
How do I apply the same navigation menu to all pages?
Hi!
I'd like to apply a standard navigation menu to all the pages
in my site.
Can it be done, or do I need to write the menu for all
individual pages?
Thanks for any advice!What are you trying to do?. If you simply want to recreate
the same
navigational structure across the site then the answer is
yes. You can
create a nav structure and place it in each page on your
site. On each
page, though, make sure the paths assigned for each link are
correct.
If you are looking for a solution in which you create the
menu one time and
have all the pages on your site point to that one nav
structure then you
should look into server side includes. You can read up on it
here:
http://httpd.apache.org/docs/1.3/howto/ssi.html.
With SSI, you create the
menu one time and point each page in your site to that one
particular file.
Any changes you need to make are only made once and are then
reflected
through the entire site.
You should also consider looking into a menu system that
automates much of
the work for you. Project VII has some excellent tools for
this:
http://www.projectseven.com/products/menusystems/index.htm
Good luck.
John
I can be done using a server side include
"peewee_larkin" <[email protected]> wrote in
message
news:fc661a$g5c$[email protected]..
> Hi!
>
> I'd like to apply a standard navigation menu to all the
pages in my site.
>
> Can it be done, or do I need to write the menu for all
individual pages?
>
> Thanks for any advice! -
How do I apply the same duration to all my pictures on the timeline?
How do I change the duration of my pictures in one shot?
Thanks for trying to help me out.
The problem is that I'm doing a wedding slideshow, and 5 seconds is too long for the pictures. To match pictures with the beats, I want to put different lengths on different sections of photos.
I've selected all of the pictures I want to change, and set the picture duration at 4 seconds. Now however, there is a one second gap inbetween each of the pictures that is now empty. Is there a tool that can now shove everything together?
(Also, somewhat off topic, but not worth making a new thread on- Is there a video transition effect that is random? I'd like to be able to set the default transition on random so they aren't all the same)
Sorry I'm kinda clueless about Premiere. I've just recently started using it and it's a little.... Hard to learn on my own. Thanks for everything though! -
How do I apply the same effect to all frames in CS5 animation?
I need to add lens flare to all frames at once - but it needs to be applied to the flattened image. I don't want to have to flatten, click lens flare for each of the 70 frames seperately.
Here is the gif and photos illustrating what happens if I select frame one - unflattened and flattened. The spinning globe of course is the animation that is inserted into the surrounding jpeg: http://bobwoolcock.com/images/300_Jiminy-Glick.gifCould this filter not be applied to a separate black Layer, that sez to Blend Mode Screen and extended in the Animation Panel in Timeline Animation instead of Frame Animation?
-
How do I Apply the Same Style to All Frames of a GIF Animation
Making a simple GIF. I have 8 Frames. Each Frame is a seperate Layer. I want to stroke all the frames in one shot. How can I do that?? Thanks
thanks. I'll give some of that a try. I'm assuming I can apply a stroke to all the layers just by selecting them all and then doing Edit > Stroke (I think that's where strok lives, I'm not in front of Photoshop at the moment.) I don't understand "reapply those layers as frames", but I'll see if I can figure it out. Thanks for your reply. I really appreciate it.
-
How do I add the same metadata to numerous files
I do voice over work and need to add metadata to hundreds and hundreds of audio files. Some of the data is the same for ALL of the files. Is there a way to autofill any of the meta data? They all have the same artist, same genre, recording date, composer, technician, and copyright info.
Twice in a week:
How do I apply the same info to specific metadata fields across multiple files, i.e. record date, artist, genre, composer, technician
We'll add your notes to the feature request. -
How do you apply the school proxy settings to the ipad to filter website searches?
How do you apply the school proxy settings to the ipad to filter website searches?
Hi Stebop1987,
You will want to apply a configuration profile with Global HTTP proxy settings to your proxy server. Use Apple Configurator or an MDM to deploy the configuration profile to your fleet of iPads. I recommend you contact your web filter provider for detials on what proxy details to enter in the configuration profile (type, server, port, username, password).
Hope this helps!
~Joe
Maybe you are looking for
-
I have moved from UK to New Zealand. I need to change my address within iTunes because my credit card is now billed to me in NZ. I have an iPad. When I tap United Kingdom within the relevant change personal details section, instead of allowing me to
-
I'm studing about this mp3 player to buy it but I have some question and I can't write to customer becouse it require a creative product serial. If I add a sd card windows see 2 different memory dri've? This mp3 can do random in different folder/sub
-
Does any one can guide how to lock particular App with password?
Does any one can guide how to lock particular App with password?
-
Error message require adminstrator or higher level, already did disk repair
Hi all, I can't seem to install my printer drivers without an error message coming up: The program you are trying to install requires admin. or higher level access. I have gone to disk utilities and tried to repair disk permissions but it no use. It
-
SCCM Cleint Installation on Windows 10 Machine
Hi All, I was trying to push SCCM Client on a Windows 10 machine & i got this error :- it's clear from the log file that the OS version is not supported, but is there any workaround for this ? Thanks, Pranay.