How do I apply transitions.

Hi guys,
I have started working with adobe premiere 5.5, but I have got a problem regarding the dragging the transitions to the timeline. I imported the file and dragged it to the timeline, but when it comes to the Effects I cannot drag any video or audio transitions to the timeline, I have got no idea whether this tab is unactivated or not or perhaps I do need to do something else. anyone here to help me please?
Thanks.
=================================================
Renamed by moderator to convey some useful information. Since this is the Premiere Pro forum, titling the thread "Premiere Pro" adds no value.

with a little bit struggling I finally found the solution and they are working now. thanksssss for ur help

Similar Messages

How to apply transitions between clips in the same track?

Hey guys,
I'm in Uni on Final Cut Pro 5 and all the videos and discussions tell of how to apply transitions between clips in the same track.
I like to have my clips on different tracks so that I can overlap them at specific points but I don't know how to do this?
If I have track one. . .which ends. . .and have track 2 beginning below that (and have it overlapped for a few seconds) I don't know how to enable the transition at the point where track 2 begins.
Can anyone help?

Yep I understand that.
Let's say I overlap track 2 as I don't like the beginning of it. . .so I want the transition from the end of track one to track two to occur in the middle of track 2 - should I just trim the track to the point I want the transition to occur as opposed to have it overlapping?

How do I apply one same transition to multiple slides in one go?

How do I apply one same transition to multiple slides in one go?

After you have done either of the previous options to get the transition on the current slides, you can add the transition to the Master Slide so all your new slides will default to the same transition.

How to apply transitions to objects Cp5?

Hello all...
I would like to apply transition effects(fly, blinds,etc) to objects like rectangle, highlight box, text caption, etc.
Can anyone suggest me to add more animation effects(as much as possible in Cp) to give my project a good look as if it is created in Flash.
Thanks,
Kartik.

Hello Kartik,
I suppose you already explored the Effects coming with Captivate 5? And that you already tried out combinations of those effects (that can be stored as new customized effects)? You can already have a lot of transitions created that way.
If you have Flash CS5 you can create other Classic tweens (not the Motion tweens), export them as XML (Commands menu) and import them as new customized effects in Captivate to have them available. Would that do?
Lilybiri
PS: in another thread I just did see that you are considering upgrading to CP5, perhaps this (old) blog post could help you about customized effects:
Editing motion paths and reusing customized effects

How to Set Default Transition in FCPX?

FCP Studio allowed you to "Make a Favorite" and set it as the default. FCPX has a "Favorite" item in a drop-down menu, but it doesn't seem to set a chosen transition as a default. How to you set a default in FCPX?

Hi,
this is directly from the help menu:
Set transition defaults
Choose Final Cut Pro > Preferences, or press Command-Comma (,), and click Editing.
Set the transition default settings.
Default length: This sets the length, in seconds, of all transitions you add to the Timeline. You can adjust the transition length after it is in the Timeline.Note: Some transitions have a set duration and do not follow this setting.
Apply transitions using: This defines where the transition’s video content comes from. For information about the “Apply transitions using” setting, seeTransition overlap options.

"apply transitions using" is missing in my preference dialog box!

Why do I not have the "apply transitions using" in my preference dialog box?

Clodimedius wrote:
There is a way to avoid using the overlap mode, which is very simple.
Instead of using Command T to apply the default transition and shorten the video, drag the transition from the list of transition in the media browser effects library on the right.
This way, the default overlap mode is applied, instead of using the available media.
I am sorry, but this is just wrong. The default option is "using available media", as it should, no matter how you apply the transition. Like James said, you only get the "overlap" option if there is no available media to work with.
By the way, this has been this way for quite some time already (I think since 10.0.1, but I can't be sure).

Applying transitions to timelapses

I'm assembling some timelapses from still images which have a duration of 5 frames. I'd like to fade to black at the end of the timelapse, but haven't been able to figure out how to make a transition that layers on top of multiple images. Perhaps there is a way to (excuse the photoshop-esque language) "merge all layers (aka images)" into one video segment, and then apply a transition to that? Or apply some transition that is not actually attached to a specific clip and place it on a track above the timelapse, so it would force it to fade to black? Anyone have experience with this type of thing??
thanks!
Erik

Erik,
If I am reading your needs correctly, I would extend the Duration of that last Still Image (click+drag on its Tail, and then add a Dip-to-Black Transition. Note: you can alter the Duration of Transitions in Edit>Preferences>General>Video Transitions (for your case - but you can also change the Duration for Audio Transitions too).
If you need a bit longer "black," then go to the New Icon in the Project Panel, and from the drop-down, choose Black Video. This will be created at the Duration for Still Images, that you have set in Edit>Preferences, but again, you can click+drag on its Tail, to change that Duration.
Is that helpful, or did I completely miss what you are trying to do?
Good luck,
Hunt

How can i apply adobe bridge in my ipad 2?

how can i apply adobe bridge in my ipad 2?

As when installing an app on a computer, there must be a version for the app that is compatible with the computer and the OS running the computer.
Is there an Adobe Bridge app for the iPad available via the iTunes app store?

How do I apply programmatic skins for completely custom drawn components of a Flex library project?

Hello folks,
I am looking for best practices advice when (1) creating
custom components and (2) styling and skinning.
I already know how to skin a component part of the Flex
framework. I can make a class extending ProgrammaticSkin and have
my component skinned using CSS to link the component with the
reference to my custom class.
However what about those cases when you are completely
creating a component from scratch?
Imagine a "Freehand Drawing Canvas" component that allows the
user to draw on it and has some buttons to set color styles, line
styles, etc., or imagine a "Screen Flow Gallery" component that
displays visual objects in a fashion similar to Cover Flow in the
Mac.
In many components I am aware you may reuse other components
part of the Flex framework but I am trying to picture an scenario
where you would need to draw everything yourself because there just
isn't something to base it upon so you will end up drawing it from
scratch.
To learn how instead of building one of those components I
mentioned previously I decided to start with something simple that
would illustrate this like a LiteButton component that will behave
just like the Flex mx.controls.Button but will extend UIComponent
and be completely custom drawn.
The component will have a default look and will also be
style-able and skin-able. I will provide styles for users of the
component to modify and regarding skinning anyone can create a
custom ProgrammaticSkin adding its own drawing logic and link it to
the component via CSS with the ClassReference applied to the skin
selector.
So far so good and it's clear what I want to achieve. I
actually know how to do most of the stuff here but I have one
single problem.
Here is my question, where should I put my custom drawing
logic? If I do it in the updateDisplayList inside the class
extending UIComponent it works, however I thought that it would be
a better practice to do it using programmatic skins, that way I
could provide different skin themes for my component set.
The problem is that I can't make the programmatic work in
this scenario. I tried instantiating the custom programmatic skin
during the updateDisplayList of the LiteButton component and adding
it to my display object via addChild but that didn't do anything. I
also tried creating a "default.css" stylesheet and tried to use
ClassReference as I would normally do to skin an already existing
component (or composite component as well) but that didn't do
anything either.
So how do I apply programmatic skins for completely custom
drawn components of my Flex library project?
I could do it inside the updateDisplayList of the LiteButton
class extending UIComponent but again I would like to provide
different theme sets for my components so it makes sense using
programmatic skins.

"jbucaran" <[email protected]> wrote in
message
news:[email protected]...
> Hello folks,
>
> I am looking for best practices advice when (1) creating
custom components
> and
> (2) styling and skinning.
>
> I already know how to skin a component part of the Flex
framework. I can
> make
> a class extending ProgrammaticSkin and have my component
skinned using CSS
> to
> link the component with the reference to my custom
class.
>
> However what about those cases when you are completely
creating a
> component
> from scratch?
>
> Imagine a "Freehand Drawing Canvas" component that
allows the user to draw
> on
> it and has some buttons to set color styles, line
styles, etc., or imagine
> a
> "Screen Flow Gallery" component that displays visual
objects in a fashion
> similar to Cover Flow in the Mac.
>
> In many components I am aware you may reuse other
components part of the
> Flex
> framework but I am trying to picture an scenario where
you would need to
> draw
> everything yourself because there just isn't something
to base it upon so
> you
> will end up drawing it from scratch.
This may help with that
http://livedocs.adobe.com/flex/3/html/help.html?content=skinstyle_3.html
> To learn how instead of building one of those components
I mentioned
> previously I decided to start with something simple that
would illustrate
> this
> like a LiteButton component that will behave just like
the Flex
> mx.controls.Button but will extend UIComponent and be
completely custom
> drawn.
>
> The component will have a default look and will also be
style-able and
> skin-able. I will provide styles for users of the
component to modify and
> regarding skinning anyone can create a custom
ProgrammaticSkin adding its
> own
> drawing logic and link it to the component via CSS with
the ClassReference
> applied to the skin selector.
>
> So far so good and it's clear what I want to achieve.
Actually after
> playing
> with the weekend and today I know how to do most of the
stuff but I have
> one
> single problem. So here is my question, where should I
provide my custom
> drawing logic? If I do it in the updateDisplayList
inside the class
> extending
> UIComponent it works, however I thought that it would be
a better practice
> to
> do it using programmatic skins, that way I could provide
different skin
> themes
> for my component set.
These aren't mutually exclusive. When you provide a skin with
a
TypeSelector, you have to add it to the display list
somewhere, and this is
typically done in updateDisplayList or addChildren. I prefer
to do it in
updateDisplayList, because you can then change it if the
style changes.
> The problem is that I can't make the programmatic work
in this scenario. I
> tried instantiating the custom programmatic skin during
the
> updateDisplayList
> of the LiteButton component and adding it to my display
object via
> addChild but
> that didn't do anything.
Exactly what did you do?
> I also tried creating a "default.css" stylesheet and
> tried to use ClassReference as I would normally do to
skin an already
> existing
> component (or composite component as well) but that
didn't do anything
> either.
I've never had any problem using an approach similar to
this...but I will
say that I couldn't see any advantage in creating a
default.css style sheet,
since it's not really default in the way that the one that
comes with Flex
is. It's much more obvious to anyone using your component
what's going on
there if you create a style sheet where they're likely to
spot it.
> So how do I apply programmatic skins with the default
look for custom
> drawn
> components?
It seems like your approach is fine, but maybe you've made a
mistake in your
implementation.
> I could do it inside the updateDisplayList of the
LiteButton class
> extending
> UIComponent but again I would like to provide different
theme sets for my
> components so it makes sense using programmatic skins.
You might want to consider also adding an instance of
HaloBorder to your
component. That brings a lot of functionality with it.
HTH;
Amy

How do you apply the same password policy to every PDF document you create with inDesign?

All,
Adobe peeps!,
I don't know if this is really supported with inDesign 5.5, but here is my my use case:
I constantly create more than 10 PDFs a day using inDesign
On all PDF's I create, i want to apply password security to protect them
But in order to do so, within inDesign, I am always forced to go to the "security dialogue" pane to set up the same permission and passwords over and over again
This gets tiring :/
So what I am hoping to do is the following:
Like acrobat, I want to create a password policy within inDesign
I want all PDFs created to have such a password policy be automatically applied
I know acrobat supports something like this (http://help.adobe.com/en_US/acrobat/pro/using/WS58a04a822e3e50102bd615109794195ff-7d68.w.h tml), but, unless I may have missed something, the Acrobat feature is limited. That is, the help link does not tell me how to automatically do this with Acrobat either (the link does not explain to me how to "automatically apply the same password security policy to every PDF document I save within the application). I think the only way to do so is via "Adobe LiveCycle Rights Management ES", but for non server users, I am hoping there is another way.
So my questions are:
Is it possible to create password security policies in inDesign?
Is it possible to apply the same password security policy to every PDF i create in inDesign?
If not, can I change default settings within Acrobat ProX to automatically apply a password security policy everytime I save a PDF?
If all fails, do you guys know of any extensions that can support this?
Any help would be great. Thanks!

Steve,
Thanks for your notes. To follow up on your response.
Bummer. I kinda had a hunch at this inDesign limitation.
I have been aware of the method for setting up of a security policy within Acrobat. While this feature does cut down some of the work involved in creating and applying password policies to pdfs, what I am looking for with Acrobat is to apply the same password policy to every document I save from the app. Automatically. Without having to manualy select a policy.
I think my solution will have to lie in me creating some sort of script to help support this need. I don't think Acrobat Pro X has the capabilities to allow me to tinker with, say, creating a save PDF preset that will allow me to automatically apply a password policy.
PS. I am using acrobat pro x.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

How do I apply same adjustments to multiple photos at the same time?

How do I apply same adjustments to multiple photos at the same time?

You can't but you can copy the adjustments made on one photo and apply/paste it onto another by:
1 - Control (right)-clicking one the edited photo in the Edit mode and selecting Copy Adjustsments
2 - Control-clicking on the next photo and selecting Paste Adjustments.
OT

How can I apply my CS Photoshop membership to a second computer?

how can I apply my CS Photoshop membership to a second computer?

Thank You!
I felt like I was wandering through mazes to get that question to the right
venue.
Thanks again,
Gayatri

How do I apply a fade to the end of an audio track?

I'm using Captivate 7, and have added one of the Gallery sounds to a slide in my software simulation. I want the track to fade at the end of slide, so I guess I need to apply an effect. All the help refers to "clicking the triangle next to the audio track name" to expand the track for editing, then goes on to talk about keyframes. I don't see a triangle next to the track name, or next to anything related to the track. I am in the Effects workspace. Also, on the EFFECTS tab, all the selections are grayed out.
I also tried adding a fade by using the settings on the PROPERTIES tab, but it doesn't affect the playback.
How do I apply a fade effect?

Effects have no relation whatsoever with audio clips, I don't understand why you were looking there.
You can edit audio, and to get into the editor there are several ways. If this is slide audio, the clip is visible on the timeline and right-click menu has an option Edit. Another way is to find the clip in the Library, and the right-click menu on its name has more options, not only Edit in Captivate, but you can also use another application which I would recommend. The audio editor in Captivate is pretty limited, I'm using Audition, but Audacity is free to use.
For an easy way to have a fade out (you can time it, not the way of fading like in a real audio editor), you don't even need the audio editor in Captivate. Look in the Properties panel, part Audio and you'll have Fade in and Fade out.

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

How do I apply transitions.

Similar Messages

Maybe you are looking for