How Do I Assess The Number Of Times A Page Has Been Hit?

Can anyone identify the schema, table and field that when queried identify the number of times an individual page has been accessed?
I want to create a 'hit counter'. Ideally the field would identify all accesses, not by IP address or username or any other denominator.

portal30.wwlog_activity_logs
Portal logs activity in two tables wwlog_activity_log1 and wwlog_activity_log2. It toggles between these two tables every week by default. The wwlog_activity_logs is a view connecting both of these tables.
Be prepared to do some homework to figure out how to identify the actual page(s) you want to log. It's not clear cut and also be aware that you can't get down to the actual tab pressed within a page without some custom coding... and also, portal purges logged data every two weeks by default.

Similar Messages

How do i count the number of times a cell has been referenced by other cells' formulae?

Hello,
I have a spreadsheet of recipes and ingredients that use checkboxes to let me know which recipes I can make based on the ingredients I have on-hand, using a formula like this one: =IF(AND('Spirits' :: A42,Mixers :: A18,Mixers :: A41,'Spirits' :: A25 ),Table 3 :: $A$2,Table 3 :: $A$3). If I've checked all of the boxes for ingredients that are required for any one of my recipes, the cell that the formula is in returns something like "YES"; otherwise, it returns a blank. It works well enough, but I'd like to include a cell next to each ingredient with a formula that will look through the hundreds of recipes, which all use a formula like the one above, and return a count of the number of times the ingredient's cell is referenced in those formulas. That way, I'll know which ingredients are the most commonly used in my eclectic collection of recipes. I thought something like =COUNTIF('Recipes' :: A2:A343, "=A2") would work, but it doesn't look at the cell references in the formulas, so no, it doesn't work. Any ideas? I'm using Numbers 2.3

Hello
There's no formula to inspect other formula in Numbers. So what you asked cannot be achived in such a way you described.
A simple alternative method would be to build recipe-ingredient matrix as follows.
E.g.
Table definitions:
Recipes
A1    Recipe \ Ingredient
A2    A
A3    B
A4    C
A5    D
A6    E
A7    F
A8    # recipes / ingredient
B1    X1
B2    TRUE
B3    FALSE
B4    TRUE
B5    FALSE
B6    TRUE
B7    FALSE
B8    =COUNTIF(B,TRUE)
C1    X2
C2    TRUE
C3    TRUE
C4    FALSE
C5    TRUE
C6    TRUE
C7    TRUE
C8    =COUNTIF(C,TRUE)
D1    X3
D2    FALSE
D3    TRUE
D4    FALSE
D5    TRUE
D6    FALSE
D7    TRUE
D8    =COUNTIF(D,TRUE)
E1    X4
E2    FALSE
E3    FALSE
E4    FALSE
E5    FALSE
E6    FALSE
E7    TRUE
E8    =COUNTIF(E,TRUE)
F1    Y1
F2    TRUE
F3    FALSE
F4    TRUE
F5    TRUE
F6    TRUE
F7    FALSE
F8    =COUNTIF(F,TRUE)
G1    Y2
G2    FALSE
G3    TRUE
G4    TRUE
G5    FALSE
G6    FALSE
G7    TRUE
G8    =COUNTIF(G,TRUE)
H1    Y3
H2    TRUE
H3    TRUE
H4    FALSE
H5    TRUE
H6    TRUE
H7    FALSE
H8    =COUNTIF(H,TRUE)
I1    Y4
I2    FALSE
I3    FALSE
I4    FALSE
I5    FALSE
I6    FALSE
I7    TRUE
I8    =COUNTIF(I,TRUE)
J1    in-stock?
J2    =SUMIF(B2:E2,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F2:I2,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B2:I2,TRUE)
J3    =SUMIF(B3:E3,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F3:I3,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B3:I3,TRUE)
J4    =SUMIF(B4:E4,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F4:I4,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B4:I4,TRUE)
J5    =SUMIF(B5:E5,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F5:I5,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B5:I5,TRUE)
J6    =SUMIF(B6:E6,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F6:I6,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B6:I6,TRUE)
J7    =SUMIF(B7:E7,TRUE,TRANSPOSE(X::$C$2:$C$5))+SUMIF(F7:I7,TRUE,TRANSPOSE(Y::$C$2:$C$5))=COUNTIF(B7:I7,TRUE)
J8
X
A1    Ingredient
A2    X1
A3    X2
A4    X3
A5    X4
B1    in-stock?
B2    TRUE
B3    TRUE
B4    TRUE
B5    FALSE
C1    code
C2    =IF(B2,1,0)
C3    =IF(B3,1,0)
C4    =IF(B4,1,0)
C5    =IF(B5,1,0)
Y
A1    Ingredient
A2    Y1
A3    Y2
A4    Y3
A5    Y4
B1    in-stock?
B2    TRUE
B3    FALSE
B4    TRUE
B5    FALSE
C1    code
C2    =IF(B2,1,0)
C3    =IF(B3,1,0)
C4    =IF(B4,1,0)
C5    =IF(B5,1,0)
In "Recipe" table, the first row is header row and the last row is footer row.
Hope this may help,
H

Does anyone know if there is a way for the number of time a song has been played on your iPhone/iPod be transferred to the songs on your iTunes number of plays?

I mainly just use my iTunes for organizing and adding new songs. Most of the time I listen to my music on my iPhone. I wish it would keep track of how many times I play a song in my music and transfer it to the computer under the 'number of times played' column. It would help out so much! Does anyone know if there is a way for the number of time a song has been played on your iPhone/iPod be transferred to the songs on your iTunes number of plays?

Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add.

How to calculate the number of times an user has accesed a BEx report

Hi Experts,
We have number of reports in our BW portal and users logon to the portal and run the reports.
How do we count the number of times each user has logged in and ran each report.
Kindly advice.
Thanks,
Sai

Hi Sai:
I think you can use BI statistics information, which could provide you more detail information.
You can follow the document
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards,
Louis Lu

How can I increase the number of times my 4s rings before it goes 2 msg bank?

My iphone 4s only rings 3 times before it goes to msg bank. How Can I increase the number of times it rings?

This is controlled by your carrier, so contact them,

How can I increase the number of times I am notified that I have a text or voicemail .

How can I increase the number of times I am notified that I have text or voicemail waiting to be read?.

DPickRN,
Making sure you don't miss any messages is very important and we would be happy to go over your options today. Are you using the Visual voicemail or do you call *86 to access your voicemails?
CandiceH_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

HT1689 How can I extend the number of times my phone rings before going to answerphone

How can I extend the number of times my Iphone 4s rings before it goes to answerphone

Call you carrier and ask them how you can change this. The number of rings before voicemail kicks in is set by your carrier. Some have the option to do it from your phone if you know the sequence of codes to send, but you need to ask your own carrier how to do it for their system.

Number of times main memory has been unloaded in last 24 hours "0"

Hello Experts,
I am getting error "BIA server is overloaded" in RSDDBIAMON2 tcode.
Description is below:
BIA server is overloaded
Message no. RSD_TREX154
Diagnosis
The SAP NetWeaver BI Accelerator server is overloaded. Either there has recently been a forced unload of the BIA main memory, ort he total volume of loaded data exceeds the limit of 50% of the available main memory.
Both these situations negatively impact the stability of the BIA server.
Procedure
You have two options:
Decrease the volume of data in the BIA: Delete BIA indexes that you do not currently need or that you do not urgently require.
Contact your BIA hardware partner and carry out a new sizing for the BIA hardware.
Procedure for System Administration
By default, this message only appears as a warning in processes that index large volumes of data in the BIA. You can use administration parameters to specify this warning as an error message as well. This causes all index processes to terminate if the error occurs.
To do this, execute program RSDDTREX_ADMIN_MAINTAIN with parameters Object= DONT_IGNORE_BIA_OVERLOAD, Value = X, and INSERT/UPDATE = X.
Diagnois says
1) The total volume of loaded data exceeds the limit of 50% of the available main memory,I have already checked the disk used for storing the indexes and it is not more than 50% of the BW Accelerator main memory.
2)There has recently been a forced unload of the BIA main memory: As per error details Number of times main memory has been unloaded in last 24 hours: '0' ie no unloaded had happened in last 24 hours.
Please help me how i can solve this erro as there is not unload happened and also disk usage under control.
Regards,
Akshay

hi,
1) You can check the traces via the trex standalone tool trexadmin or transaction TREXADMIN. You must provide more details to get an analyze. Was there running a lot of process chains at this time? Have you checked the memory monitoring of the BWA blades?
2) transaction TREXADMIN -> tab version..
You can try going through SAP notes which help with high memory issues.
Sometimes, the rfc server sometimes takes a lot of memory and doesn't free it afterwards.
Thanks,
Sheen

HT4623 how do i stop the ios 7 update; "verifying update" has been spinning for at least 7 hours

how do i stop the ios 7 update;"verifying update" has been spinning for at least 7 hours.

tanyanakai wrote:
How do you get the ios 7 update for ipod touch 4?
You cannot. the iPod Touch 4th Gen is not compatible with iOS 7.
See the very end of this link for Compatible Devices and Features...
http://www.apple.com/ios/ios7/features/

I am unable to access my email. I can sign in with my password, then a message comes up that says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All plug-ins listed are enabled. What am I missing?

I am unable to access my email from Charter.net. I can sign in with my password, then a message comes up which says "The plug-in for this page has been disabled. Click here to manage your plug-ins." All of my plug-ins are enabled. What am I missing?

After a great deal of searching I ran across the suggestion to disable all plug-ins and then, one by one, enable them until finally the problem was solved. I am not sure which plug-in was causing the problem, as I am satisfied to have the problem solved. I am going to leave the rest of the plug-in disabled.

I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also ca

I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!

Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum.

How do I count the number of times a word appears in a column?

What I have is a spreadsheet logging work history. Let's say the work location is "office", "home", or "travel" and I want to have a separate cell in another table for totals, count up the number of time each appears in the data for the year. So it would look like this:
Date
Location
sept 1
office
sept 2
home
sept 3
home
sept 4
travel
sept 5
office
sept 6
office
sept 7
office
sept 8
travel
sept 9
home
sept 10
office
Totals
Days
10
Office
5
Home
3
Travel
2
I just can't figure out how to develop the formula to put in the Totals column to make it work this way. If you can help me achieve this I'd really appreciate it!

Hi SpartanAntarctican,
Table 1 to record your locations
Date
Location
sept 1
office
sept 2
home
sept 3
home
sept 4
travel
sept 5
office
sept 6
office
sept 7
office
sept 8
travel
sept 9
home
sept 10
office
Table 2 to sum your locations
Totals
Days
10
Office
5
Home
3
Travel
2
In Table 2 the formula in B2
=ROWS(Table 1::A)−1
Minus 1 because there is a Header Row in Table 1.
In Table 2 the formula in B3 (and Fill Down)
=COUNTIF(Table 1::B,A3)
You can check this by adding 5 + 3 + 2 to arrive at 10
Or maybe delete Row 2 put the Days calculation into a Footer Row in Table 2
=SUM(B) .
Regards,
Ian.

How I can to know in JSP if one page has been called by other page

Hi,
I have a JSP portlet with one form to submit some information about clients.
When the visitor click one image the form is submitted correctly and the information is stored into database.
The problem is that I can't clean the values of the strings after the insert and when I call the page again, the code insert again the last information in the form.
My JSP code is supported in the feedback code of JPDK, but I can't ask for the value of submit button because the submit is done by the click over the image, with the next code:
<img height=16 alt=Submit src="/pictures/stacksite/form_send.gif"
width=99 border=0>
I ask for one input box required, if is null run the insert code, if don't I display the form page.
How I can clean this variables or how I know if the page has been submitted immediatly before. What variable I can request in JSP to know that or what I can do?
Regards,
FABIAN

I'm not sure that any javascript is necessary. You just need to turn the image into a 'proper' submit button, using the <BUTTON> element. This will cause the form and all its data to be POSTED, rather than to be sent as a query in a GET request. Note that it is important that the form passes on the value of the PortletRendererUtil.PAGE_LINK parameter using a hidden field, so that the jsp remembers the portal 'context' it is running in. E.g.
<%
// Derive a portlet-specific name for the submit parameter
String submitParam = HttpPortletRendererUtil.portletParameter(request, "submit");
if (request.getParameter(submitParam) != null )
... handle the data ...
%>
<form name="contactinfo" method="POST" action="<%= HttpPortletRendererUtil.htmlFormActionLink(request,PortletRendererUtil.PAGE_LINK) %>" >
<%= HttpPortletRendererUtil.htmlFormHiddenFields(request,PortletRendererUtil.PAGE_LINK) %>
<BUTTON name="<%= submitParam %>" value="submit" type="submit"><IMG src="/pictures/stacksite/form_send.gif" alt="submit"></BUTTON>
</FORM>
null

How can I count the number of times a timed loop finished late?

I am getting occasional timing errors in a timed loop under windows XP and would like to count the number of errors, but I can't find a simple software counter vi

The timed loop has a terminal (boolean) to indicate if the previous iteration finished late. Just increment an integer shift register if this happens.
The attached shows a very simple demo (LabVIEW 7.1).
LabVIEW Champion . Do more with less code and in less time .
Attachments:
LateCounter.vi ‏76 KB

How do you increase the number of home/application pages?

Our family has iTouch 64G & everyone has setup a couple of individual home pages. It seem that there is currently a limit of 11 home pages. How can this be increased? We have plenty of memory available. Thx in advance.

unless you jailbrake your device (which would void your warranty), there is now way to increase the number of pages - 11 is the max !
future updates to the OS may or may not change that.
JGG

How Do I Assess The Number Of Times A Page Has Been Hit?

Similar Messages

Maybe you are looking for