How do I assign multiple midi in/out ports???

Help...I have x2 midi keyboards and want to send midi data from each one to x2 separate devices/software instruments, ie Stylus RMX & Absynth thru separate midi in ports. I have a Tascam FW1884 which has x4 midi in/out ports. How do I do this? I've tried messing around in the environment but to no avail. Ideally when I play keyboard 1, midi is sent to Stylus and not recieved in absynth. I know I could use separate midi channels for this but would like to preserve these for additional midi controller data etc. Any help would be greatly appreciated. I'm having to revert back to cubase SE for the time being as its far easier to do: (

Some devices can support this, I have a hands free car kit that recieves my voice audio and I have the calls sound come through my bluetooth ear piece.. What I did was setup both devices and then went into bluetooth settings page and press one device at a time and select the the option menu, from here you usually see the supported connections for device.
Mine shows Phone and Audio and on ear piece I set to "Audio" and select my Jabra car kit and remove all checks but audio "Phone"... By doing this I can hear through the bluetooth ear piece and use the hands-free mic to conversation..

Similar Messages

HT1338 how do I turn off optical digital-out port?

how do I turn off optical digital-out port?

Just want to report that I too, running 10.6.5 on a MacBook Pro, had the mysterious " Audio Out Stuck On Optical Digital-Out Port" problem whereby I was unable to adjust the volume on my built-in speakers and they were permanently "muted" because the operating system was sending the audio signal to a non-existent device that it falsely thought was plugged in to my unused headphone jack hole. I thought at first the problem must necessarily be software-based because the built-in speakers worked fine when playing the start-up chimes. So I uninstalled something called "Soundflower" which does some mysterious shenanigans with commandeering the internal audio signal so that one can make audio recordings of one's computers' sound effects. But uninstalling Soundflower had no effect. So I uninstalled some other audio-related software, also to no avail. Then I zapped the PRAM, to no avail.
Then I decided to try what some people call "the toothpick trick," i.e. poking around in the headphone jack hole to see if something was stuck in there shortcircuiting it, and initiating the false signal to the OS.
Bingo! Success!
Actually, I did a hyper-sophisticated version of the toothpick trick:
First, I own a home "otoscope," one of those doohickeys that doctors use to look into your ear. One can now buy amateur versions of otoscopes for home use, to looks for kids' ear infections, etc. (They only cost $30 or so.) Anyway, using the smallest attachment designed for babies' ears, I was able to look (with illumination) into the headphone jack hole and yessiree there was a big bunch of dust stuck way deep in there.
So then I took not a toothpick but instead a slender dental prong-pick thingie made of stainless steel, and very delicately was able to snag the clot of dust deep in the hole at the bottom on the first try. Quite a wad!
Then I took one of those rubber ear-bulbs, used for cleaning out your ears, and used it as a micro-vacuum-cleaner: Squeeze the rubber bulb til it is as empty as can be, then place the tip of the bulb at the entrance to the headphone jack hole, then suddenly release my grip: it ***** air out of the tiniest spaces! After doing this a few times, I then did the reverse and blew blasts of air into the hole.
After all this, I looked back into the hole with the otoscope, and it was sparkling clean! Not even the tiniest speck of dust in an area that just three minutes earlier was thick with dust.
I then turned my computer back on and...problem solved! The audio worked again like normal, and it was no longer detecting an imaginary "Optical Digital-Out Port" device. The internal speakers once again worked as normal, and the volume could be adjusted.
I guess the problem for me really was dust causing a short-circuit. It might very well be the same for you -- so try cleaning out the headphone jack hole as I did.
I'm writing this detailed description to help anyone else in the future with a similar problem.

How do I create multiple midi tracks each with separate external synthesizer sound

Mac Pro OS 10.10.2, Logic Pro 10.1.1, FireFace 800 (updated), Roland XP-30 synthesizer/keyboard, Mackie mixer.
XP-30 analog output to Mackie, FireFace monitor to FireFace main inputs and FireFace out to Mackie.
What I can't get to work: Sound output for monitoring as I record on each of several midi tracks, each with access to my banks/programs.
Logic automatically set up the multi-instrument and created 16 tracks, visible in the mixer window. I have entered custom banks for the XP-30 and they are working.
Mt problem is two parts. First, my last experience was with Logic Pro 7 way back.
Problem two is that when I create midi tracks (except for the first one I created on channel 1) by control-clicking on one of the tracks in the mixer window I get no sound for monitoring. I can see the green monitor indicator for the track shows midi data incoming. I just can't hear it. It's as if there is no designated output. I have checked audio preferences and see the FireFace as input and output device. If i change the channel to channel 1, I get the sound, but then I have two tracks on channel 1 which doesn't work for designating unique sounds to each track.
I can select "All" for channel and get monitored sound on several tracks; however, they then all play the same sound, of course.
i can create midi tracks (either instrument or external) using the plus icon, but no matter how i set them up that way, they do not allow me access to my banks/programs.
In logic Pro 7 it was no problem creating multiple midi tracks, each with a different sound assigned to it. In Logic Pro 10, I am baffled regarding how to accomplish this and get it all to work as simply and nicely as I was able to with #7.
Make sense? Can anyone help?
Thanks

I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
source, and Performance settings can be modified. If you’re
using an external MIDI device to control the XP-30 in this
mode, it will function as a multitimbral sound source."

How to deploy across multiple mid-tier instances

I was hoping someone may be able to point me in the right direction. We have two portal/webcache mid-tier instances on release 10G AS 9.0.4.2. On the ias_admin home page I tried to create a cluster and add the two instances to a cluster but it won't let me do it for a portal type install. If that is the case, how do people handle deploying such things as portlet providers and data sources across multiple mid-tier instances? Here is the concern from our Portal admin:
As discussed, the inability to cluster the mid-tiers will cause issues in production as we try and keep deployed portlet providers with their required configurations and datasources in synch. While deploying and configuring 1-2 mid-tiers for a given portlet manually is do-able, the chance for out of synch components or configuration settings is amplified for each additional mid-tier. If we manually deploy 5 mid-tiers and accidently mistype the datasource for example, we'll have a random error that will occur once requests are attempted to be serviced by that mid-tier. This will make troubleshooting difficult. We really need some way to deploy and configure settings one time and have these items propagated to all the other mid-tiers.
What is the best way to handle this scenario?
Regards and thanks for any info,
Chris Schumacher
Embry-Riddle Aeronautical University

Jar files are not stored on the file system
Temporary files are held in bpel/domain/default/tmp folder, whereas jar files in the dehydration store for clustered deployment.
If you configure BPEL (not AS) cluster - files will be propagated to all nodes.
MJ

How do you assign multiple values to a single element in an array?

I'm probably not wording the question right.
I have an array, let's call it M[], and for each element in the array (we'll say M[1]), I need assign three integers: row, col and value.
I need to set it up so I can do something like this:
A.row = M[i].col;
A[i].col = M[i].row;
A[i].value = M[i].value;
The algorithm isn't what I need help with, it's assigning .col, .row and .value to an index of an array.
Please help if you can.

You are right. You did not word your question perfectly, but I still think I get what you want.
First of all: A single element in an array always has exactly one value. No more, no less.
But that's not a problem. The element in an array is either of a primitive type (boolean, byte, char, short, int, long, float, double) or it's a reference (to a Object, String, MyClass, ...).
You can simply write a class that holds your three values and create an array of that type:
public class SomeData {
public int row;
public int col;
public int value;
// somewhere else:
SomeData[] a = new SomeData[10];
a[0] = new SomeData();
a[0].row = 10;
a[0].col = 5;
a[0].value = 42;Note how you only assign a single value to the element (a[0]) itself. All other assignment actually go to fields of the object refered to by that element in the array.
Also note that in Java types (such as classes, interfaces, ...) should start with a upper-case letter, while variables (local variables, members, parameters) and method names should start with a lower-case letter.
Edit: I'm getting old ...

How do I record multiple midi instruments in Logic Pro simultaneously on separate tracks?sim

Hi. I am trying to record multiple midi instruments simultaneously into Logic Pro 9 through a MOTU USB Fas Lane so that it is similar to recording a live band.
Essentially:
Track 1: Midi Keyboard - Motu Fast Lane Input A - Logic Pro - Software Instrument (Absynth)
Track 2: Midi Drum Kit - Motu Fast Lane Input B - Logic Pro - Software Instrument (Battery)
Neither Midi device can be set to a separate channel.
I would have thought this was a really common application (recoding from multiple live midi sources like a band would normally do) yet it seems unnecessarily complicated.
I gather what I would have to do involves:
1) Going into the Environment.
2) Creating a Physical Input
3) Creating a Sequencer Input
4) Placing a transofrmer between the Physical Input and the Sequencer Input
Where to go ffrom there I have not got a clue!
Any help would be appreciated.
Incidentally I would also like to record two audio tracks at the same time as the midi track, but hoepfully that does not complicate things further.
Thanks,
Luke

I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
source, and Performance settings can be modified. If you’re
using an external MIDI device to control the XP-30 in this
mode, it will function as a multitimbral sound source."

How to get the data from 2 out ports (tables) of BAPI into one table

I have a BAPI that has two out ports (header and detail). How do I display this data in one table.
Thanks,
Subba

Hi,
you have the Union operator to merge multiple datasets into one dataset
regards Tobias

How can we Assign Multiple DS to Cube

Hi can you any tell me how to load data from multiple data sources to one Target.
Ex:- I have Sales,Delivery, Billing Data Sources. I want to add these Data Sources to sales over cube.Will it works.Other wise you can share your Solutions.

hi,
I hope this question is regarding BI, kindly post the same in BI forum so that you will get more answers
Regards,
Sudhir

How i can assign multiple values to tabuler text item (Help)

HI
IM PROGRAMMING ONE FORM AND I PUT THERE TABULER TEXT ITEM
I WANT ASSIGN 63 VALUES TO THIS TEXT ITEM ONE BY ONE BY CODE I MEAN PUT FIRST VALUE IN THE FIRST TEXT ITEM ROW THEN SECOND TO THE SECOND TEXT ITEM AND LIKE THIS UNTIL I REACH TO THE LAST
I MAKE LOV PUT I CAN ASSIGN ONE VALUE BY ONE VALUE EACH TIME DOUBLE CLICK ON THE TEXT ITEM ASSIGN ONE VALUE THEN DOUBLE CLICK ON THE SECOND ROW PUT MY BOSS WANT ASSIGN ALL VALUES 63 FROM ONE CLICK ON BUTTON

Then you will have to create a when-validate-item trigger with a cursor based on your selection of your LOV . Loop through that cursor assigning the next in the next record by using the built-in function next_record. (put you selection for you value in a hidden item for example.
something like this:
Declare
cursor c is
select returnValueFromLOV
from <yourtable>
where yourdisplay value = :hidden_tem;
begin
for r in c loop
next_record;
item := r. returnValueFromLOV;
end loop;
exception
when no_data_found
your error handling;
end;
Hope it put you on the road to reach what you want
Erwin

How to create/assign Multiple UOM's for a Service

How do i create more than ONE, "Unit of Measures - for a perticular Service" in a Product Category/Group ?
AC01/AC02/AC03 would allow me to add "BASE UOM", but cant add more than one UOM for that service.
Can we have one-to-many relation between Services & UOM ? if not, how is it done in SRM-MM ??
-Rupesh

Dear Poster
Your thread has had no response since it's creation over
1 year ago, therefore, I am closing the thread.
Should the issue still be outstanding please create a new thread in the relevent forum.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

How to send to multiple people using same port?

I am trying to have one person send TWO audio sources to 10 others using same port- lets say 12345. I get "Can't open local data port:" error. The first audio is fine since I just use .addTarget(). Is there a way i can do the same for the 2nd audio source still using the same port? thanks!

As far as I know, you should transmit using even-numbered ports, eg. 22222 and 22224.
I think a port numbered 22223 and 22225 are opened respectively to handle control information.
Could be wrong, but try it anyway!
StHogan

Assigning Multiple channels to one Camapign

Hi Gurus.
We have a requirement for our business where the marketing user would like to assign multiple channels to a campaign. Is this possible.
Ex. Marketing dept creates a campaign would like to target all existing customer. Now they want to execute this campaign through, telephone, e-mail, etc.
My question is it possible and if so how can we assign multiple channel for one campaign execution.
Unfortunately this a urgent requirement and i need to come up with a solution by very quickly.
Your help ment awould be really appreciated.
Thanks
Rao

Hi Rao
it is pretty easy,just you have to define the communication channel for all the BPs which you want to use for your segmentation cause.
within those BPs go to the identification tab and therein you just mention all those communication channels details which you want to use for assigning the BP to target group
after you are done with it just assign target group and do the segmenation.
do revert back in case of any doubt
best regards
ashish

Assigning Multiple Class to ID

How do I assign multiple classes to an ID? Let's say I've
created a class called Background and then a separate class called
RedFont. How would assign those two to an ID called ID1?

Oops - Thierry read better than I did.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Thierry | www.TJKDesign.com" <[email protected]>
wrote in message
news:evm61q$3l7$[email protected]..
> rmiman wrote:
>> How do I assign multiple classes to an ID? Let's say
I've created a
>> class called Background and then a separate class
called RedFont.
>> How would assign those two to an ID called ID1?
>
> id="ID1" class="Background RedFont"
>
> --
> Thierry
> Articles and Tutorials:
http://www.TJKDesign.com/go/?0
> The perfect FAQ page:
http://www.TJKDesign.com/go/?9
> CSS-P Templates:
http://www.TJKDesign.com/go/?1
> CSS Tab Menu:
http://www.TJKDesign.com/go/?3
>
>

How to send multiple midi channels to a single Kontakt Player?

I can send any channel to a Kontakt Player. But only 1 channel at a time. When I have 2 tracks dedicated a single Kontakt Player how do I assign them to different channels so that the Kontakt player responds multi-timbrally?
I can't believe that I cannot figure this out. It's a little embarrasing.

create multiple tracks that use same instrument. After you create your 1st software instrument track you can create more tracks that use that same instrument, from the track menu. Select, "New with same channel strip/instrument. you can create as many as you like.
But since they are using the same channel strip, you will have to mute and un-mute differently because muting one mutes all, so instead of muting the track itself, mute the region on a track using the mute tool.

How can we assign one attribute set to multiple business partners at a time ?

How can we assign one attribute set to multiple business partners at a time ? Is it possible ? Can anyone explain me ?

Hello,
please refer to the following thread:
How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?
best regards,
Johannes

How do I assign multiple midi in/out ports???

Similar Messages

Maybe you are looking for