How do I associate a scanner's icc profile with the TIFF files from scanning old slides?

I profiled my slide scanner and have an icc profile for that scanner. In Photoshop I can assign that profile to those files obtained by scanning slides in that scanner. Can I do something functionally equivalent inside Lightroom?

This is totally off on a tangent, so feel free to ignore:
After struggling with slide scanning on an Epson V500 for years, and generally getting lousy results (loads of chromatic aberration, poor detail resolution despite plenty of pixels, and bad color) - I decided to try to photograph them. The setup is simple. D800, Micro-Nikkor 105mm with extension tube (but any macro that goes 1:1 should do), small piece of diffusing plastic, flash backlight. And some tape to hold it all together.
Wow.
The result is razor-sharp with all the fine detail I have always missed, totally clean from CA, and with a few quick Lightroom adjustments it's there. Previously I had to bring them into Photoshop and spend hours.
The scanner is outside my window if anyone needs it...

Similar Messages

I have created a new profile and copied firefox files from my old computer into it. How do I switch to the new profile, do I just delete the old one?

I am running windows 7 I had to recover my files from an external hard drive when my old computer crashed. I have created a new profiles as outlined in the firefox website and copied all the files into it. I just need to know how to use this new profile when I open firefox, do I just delete the old profile? Or do I have to reinstall firefox.

If you no longer need or intent to use that older profile then you can use the Profile Manager to remove that profile and delete the files.
*http://kb.mozillazine.org/Profile_Manager
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*http://kb.mozillazine.org/Profile_backup

How can I restore my 4S to an earlier backup after I transferred the backup file from my old computer to a new one

My case is a little bit complicated:
I had an iPhone, which was backed up with a Windows XP computer.
Then I bought a MacBook Pro, and I transferred the iPhone backup file to the MacBook Pro's corresponding location.
Then I bought a new iPhone, and I plugged the new phone into the MCBK pro.
But iTunes does not tell me how I can restore the new iPhone 4S with the old backup file.
What can I do?
Thank you!

If the backup is not listed is Settings>iCloud>Storage and Backup>Manage Storage then no other backups exist.

How do I view an email that has arrived with the text hidden from a known & trusted source.

I have received Order confirmation from a known and trusted source. There are several emails for several orders. All appear as normal except one where there is no text at all. The only info I can find says that the text is hidden.
But there seems no way to rectify this. Can you help please?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist.

Request - ICC profile for the combination - w520 and Dell u2711

Greetings,
Due to the lack of a colorimeter, I come to you with a humble request for few calibrated ICC profiles for the DELL u2711 and the quadro 2000m w520. Probably tftcentral's review might be a well guidance for setting up a ICC profile http://www.tftcentral.co.uk/reviews/dell_u2711.htm
Thanks in advance,

hey utzutz,
could you explain on why you would like to get this ICC profiles ?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

How do i make it so iTunes plays the music files from where i have chosen to store them?

how do i make it so iTunes plays the music files from where i have chosen to store them as opposed to it scattering copies of my files into a myriad different folders based on the albums they came from when i'm not even interested in keeping whole albums?
I recently converted myself to mac after having been a windows formatted person since the beginning of time. I use last.fm and the client scrobbler only supports iTunes on the mac (scobbling since Nov 06 and i'm now heavily dependant upon it as a means of discovering new music) - if you don't know what that means then take it for granted i have no option other than to use iTunes as my media player whn using the mac. And almost immediately upon using iTunes i was filled with horror.
My tale of woe as follows: I copy all my mp3 files to folder X on my new mac. I copy my simple playlist in to that same folder X. The simple playlist simply lists all the files in folder X in the order i want to hear them in... simple right? And what happens the moment i start playing my simple list? Well you probably all ready know; itunes throws copies of all those files in to the air, scatters them to the four winds so each of them fall into a little folder of their own representing the album they might once have come from. I don't keep whole albums. For me the 'album experience' is a ruse to trick one into listening to weaker material. I only keep the concentrated goodness. I only put up with albums in a previous lifetime because in the days of vinyl i had no other choice apart from spending hours compiling mix tapes. Now i am liberated from these restrictions and have been for the 15 or so years i've been using a computer to listen to music. Until along comes iTunes forcing me backwards in time, frog marching me back into the past.
That simple list i mentioned is my one and only playlist. This single playlist has been evolving for 15 years as tracks are added and removed and their position in the list changes because that song sounds amazing when heard after that other song whereas hearing this song after that song would be like pouring custard over your sausages (for me shuffling is an abomination). And so here is how i've managed this list and managed synchronization of said list and listed files with my mp3 player (currently a Zen).
Adding a new file: After deciding that song is a keeper i will copy it into that simple folder that holds all my music and drop it in to a position on the list i deem most suited for it. Incidentally over this entire 15 year (i'm pretty sure it's been around that long) my media player has been winamp but for the reason previously mentioned i am unable to use winamp in mac world.
Removing a file: fortunately winamp has an option to simultaneously remove a file from the list and the hard drive. And naturally so because after all if i no longer like a song then i want it expunged completely from life or at least from my hard drive and playlist. In the brave new world of iTunes i have to remove from the list there then delete the file from where iTunes copied it from and then the place iTunes copied it to.
Editing the list: drag an item in the list to it's preferred location and select to save it as i would for any other file using any other application... well desktop type application as opposed to one that uses a database as its primary means of storage.
Syncing with the mp3 player: copy drag drop playlist file from the simple folder on the hard drive to the simple folder on the mp3 player as i would for any other file. And then also copy drag drop the most recently created files from simple folder on hard drive to simple folder on player after having ordered them by creation date so as to make it easier to select the most recently created. After a while the mp3 player will fill up with the files no longer on the list so i will delete all files from player then re-copy all flies from simple folder on hard drive to simple folder on mp3 player.
I do not make changes to the list on the mp3 player so synchronization needs only to go one way: from laptop to player.
So all very simple. Apart from editing the positions of files in the list everything is managed by copy drag dropping and deleting files using windows explorer.
But i'm in a mac and circumstances have forced me in to the corner of using iTunes. And this whole iTunes situation is terrifying for me as over the years i've heard horror stories about it deleting all of someone's music files. Perhaps this may have been by using the software incorrectly but even so, the very fact that it appears possible for this to happen simply by using the software incorrectly and the fact that it happens with some degree of frequency given the number of reports of this happening that i have heard of over the years on music discussion forums fills me with dread that i have to now use this software. And given the software's blatant disregard for the user's choice as to where to store his/her files it's no surprise that this happens. The software is pointlessly doing dangerous things with my data. Please make it stop.
Please can i just at the very least make iTunes play the music from the folder i have chosen to put my files in and not copy those files here there and everywhere without my say so? Thankyou.

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

How do you put safari web pages into icloud with the safari iCloud button?

how do you put safari web pages into icloud with the safari iCloud button?

What that button does is sync your tabs between your devices. So if you have multiple macs with Mountain Lion and/or devices with iOS 6 (once it comes out this fall) you can pick up where you left off. For example, let's say I have apple.com, nytimes.com, and facebook.com open on my mac, but I need to run. Later, if I need to use another computer in my household, I can just restore the tabs that I was using before on this other mac.

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

HT2548 how do i copy the domain file from OS 10.4 to a lion OS computer? I made a copy of the domain file and copied it to my new computer, but it doesn't open in iweb when I double-click on it.

How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

How can I restore the game data from an old ipod touch to a new one?

How can I restore the game data from an old ipod touch to a new one?

Restore it from the backup of the old ipod.

How can I pass multiple condition in where clause with the join table?

Hi:
I need to collect several inputs at run time, and query the record according to the input.
How can I pass multiple conditions in where clause with the join table?
Thanks in advance for any help.
Regards,
TD

If you are using SQL-Plus or Reports you can use lexical parameters like:
SELECT * FROM emp &condition;
When you run the query it will ask for value of condition and you can enter what every you want. Here is a really fun query:
SELECT &columns FROM &tables &condition;
But if you are using Forms. Then you have to change the condition by SET_BLOCK_PROPERTY.
Best of luck!

How can i retrieve a few important files from an old time capsule ?

Hi can anyone give me a step by step guide as to how i retrieve just a few files from an old time capsule ?
without a router ?
I've plugged an ethernet cable into the wan port & my mac & it shows up as a sparspsebundle data file
but i desperetly need to grab these certain files
please can anyone help?
can i use the usb port on the back of the time capsule
there must be a way HELP PLEASE many thanks

Don't panic we are working on it..
I am just avoiding Yosemite like the plague.. (plague on you Yosemite!!) .. as its networking is so bad it causes chaos on my network.. to all other devices.. even though only one device actually runs Yoyos!!
I am not sure how hard it is for you to go back to Mountain Lion.. or if you have a computer running ML on the network.. if so definitely use it.
What OS was last used by the MBP when you stopped using it or is it fully up to date. Is the computer in the network now? If so it is much easier to copy and paste the files from a live computer.
Did you encrypt the backup.. that would really mess things up or have an encrypted disk??
Have you used the normal TM tool in Yosemite to try and recover your files?? Or perhaps migrated the files.. this can work fine.. migration often being a better way of doing things.. although there are a few rules about using different user names.. etc.
There is another proviso here I must add.. Yosemite cannot see the backup quickly.. what I mean is that your backup is >500GB. Even by ethernet Yosemite version Time Machine can take more than 24hours just to index that.. maybe longer and by wireless a lot longer.. 3-5 times.. I do not know why spotlight is so slow in Yosemite.. but trust me.. it is pathetic. The yoyo got its string in a knot and seems to need to untangle it for every single file on the backup.
Be very patient if you open TM backup in Yosemite.. and definitely do this by ethernet not wireless.. otherwise you might die of old age beforehand.

How do I move my iTunes files from an old computer (Windows XP) to a new one (Windows 7 Professional)?

Can anyone tell me how to move my iTunes music and book files from an old computer running Windows XP to my new one running Windows 7 Professional? Do I download and install iTunes on the new system then use the backup and restore functions? If so, it looks like the backup only goes to CDs or DVDs; there are so many files that using a USB drive would make more sense, but that does not appear to be an option. Would it work to simply copy the iTunes folder under My Music to the new computer and assume that iTunes would find it? Thank you, very much, for any help and guidance.

Apple has tutorial and FAQ articles on moving and importing here:
http://www.apple.com/support/itunes
There is a great set of articles on iTunes and how to over on
http://www.ilounge.com
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

How do I associate a scanner's icc profile with the TIFF files from scanning old slides?

Similar Messages

Maybe you are looking for